Known and Resolved issues for Windows 10 May 2019 Update version 1903

Page 7 of 39 FirstFirst ... 5678917 ... LastLast
  1.    #60

    Qualcomm QCA9377


    Not just about old computers, on *116, I was losing WIFI intermittently, the network would disconnect. Reverting to *113 was the only solution. Not to mention the Sandbox startup issue.

    QCA9377 | Qualcomm

    https://docs.microsoft.com/en-us/win...903#445msgdesc
      My ComputerSystem Spec

  2.    #61

    Caledon Ken said: View Post
    @unbob

    You say you use sleep. Have you noticed an issue in how long it sleeps. So if it a nap, say 30 minutes does it wake up properly. Then if it really sleeps say three+ hours (hibernation) does it not wake properly?
    No, elapsed sleep time makes no difference. And I do not use hibernate.
      My ComputerSystem Spec

  3. Caledon Ken's Avatar
    Posts : 15,607
    Windows 10 Pro x64 Build 1809
       #62

    @unbob

    Since you've gone to 1903 you have issued the command

    powercfg -h off

    ?
      My ComputerSystem Spec

  4.    #63

    New "Feature" I guess? But recently have been getting this NAG screen while checking for updates. MS thinks I should adjust my active hours 1PM to 9PM (not sure what time zone they are talking about??) so I can reduce disruptions? I want to leave them where I choose them and be ready for updates and installs rather then after 9PM or before 1PM. Option to [turn ON], but nothing for NO/opt out etc. When an update happens there is an option to [restart now] or [schedule the restart] but, I am very rarely in a situation that this would be an disruption.
    Attached Thumbnails Attached Thumbnails anoy.JPG  
      My ComputersSystem Spec

  5. Caledon Ken's Avatar
    Posts : 15,607
    Windows 10 Pro x64 Build 1809
       #64

    There also appears to be an error with Pro versions losing their update deferral options. I had found that by doing a repair install they would return, in a number of cases.

    Another member then noted if you change the deferral to anything other than zero, once you had restored the options, and then check back after a certain amount of time the options are again removed.

    Not sure what the timeframe is but I hadn't checked these options in days once I set them.
      My ComputerSystem Spec

  6.    #65

    Caledon Ken said: View Post
    @unbob

    Since you've gone to 1903 you have issued the command

    powercfg -h off

    ?
    No. I've never used hibernate and there is no hiberfil.sys file on my hard drive.
      My ComputerSystem Spec

  7. f14tomcat's Avatar
    Posts : 42,875
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)
       #66

    unbob said: View Post
    No. I've never used hibernate and there is no hiberfil.sys file on my hard drive.
    Just a note.... hiberfil.sys is a hidden system file. Since you have a laptop, there's a good chance you do have one, even if never used. May I asked how you checked for it's existence?
      My ComputersSystem Spec


  8. Bree's Avatar
    Posts : 12,364
    10 Home x64 (1903) (10 Pro on 2nd pc)
       #67

    Confirmed, tested in Windows 10 Pro (x86) build 18362.116.

    If you set a non-zero number of days to defer features updates or quality updates then they disappear from the Advanced options.

    It's not a 'timeframe', as such. The contents of these Windows Update settings pages are only refreshed when you check for updates, either the automatic check or manually. Set a number of days then check for updates will make the option(s) disappear straight away.

    Using Regedit to set 'DeferFeaturesUpdatePeriodInDays' or 'DeferQualtyUpdatePeriodInDays' back to zero in the key HKLM\SOTWARE\Microsoft\WindowsUpdate\UX\Settings will make them visible again (after another 'check for updates').

    KB4497935, the CU for 18362.145, does not fix this bug.
    Last edited by Bree; 16 Jun 2019 at 16:35.
      My ComputersSystem Spec

  9. MrNovi's Avatar
    Posts : 17
    Windows 10 Pro 64 bit 1809
       #68

    Bree said: View Post
    Confirmed, tested in Windows 10 Pro (x86) build 18362.116.

    If you set a non-zero number of days to defer features updates or quality updates then they disappear from the Advanced options.

    It's not a 'timeframe', as such. The contents of these Windows Update settings pages are only refreshed when you check for updates, either the automatic check or manually. Set a number of days then check for updates will make the option(s) disappear straight away.

    Using Regedit to set 'DeferFeaturesUpdatePeriodInDays' or 'DeferQualtyUpdatePeriodInDays' back to zero in the key HKLM\SOTWARE\Microsoft\WindowsUpdate\UX\Settings will make them visible again (after another 'check for updates').

    KB4497935, the CU for 18362.145, does not fix this bug.
    Finally. This has been driving me nuts. Thanks for the info.
      My ComputerSystem Spec

  10. Caledon Ken's Avatar
    Posts : 15,607
    Windows 10 Pro x64 Build 1809
       #69

    Hope everyone is reporting on FeedbackHub.

    Needs to be recognized as issue at MS (MotherShip)
    Last edited by Caledon Ken; 4 Weeks Ago at 10:52.
      My ComputerSystem Spec


 
Page 7 of 39 FirstFirst ... 5678917 ... LastLast

Related Threads
UPDATE 7/16: Microsoft now auto updating Windows 10 version 1803 and older to 1903 UPDATE 6/18: Microsoft auto-updating Windows 10 version 1803 and earlier to 1903 and notifies you when your PC is not ready yet for the Windows 10 May 2019 Update...
Source: What's new for Windows 10 Insider Preview Builds (19H1) | Microsoft Docs What's new in Windows 10, version 1903 IT Pro content | Microsoft Docs See also: How to get the Windows 10 May 2019 Update version 1903 Windows 10 and...
UPDATE 7/9: Cumulative Update KB4507453 Windows 10 v1903 build 18362.239 - July 9 UPDATE 5/21: How to get the Windows 10 May 2019 Update version 1903 UPDATE 4/23: Microsoft blocks Windows 10 May 2019 Update with USB device or SD card -...
Source: https://techcommunity.microsoft.com/t5/Windows-IT-Pro-Blog/What-s-new-in-Windows-Update-for-Business-in-Windows-10-version/ba-p/622064 See also: How to get the Windows 10 May 2019 Update version 1903 What is new for Windows 10 May...
Source: https://techcommunity.microsoft.com/t5/Windows-IT-Pro-Blog/What-s-new-for-IT-pros-in-Windows-10-version-1903/ba-p/622024 See also: How to get the Windows 10 May 2019 Update version 1903 What is new for Windows 10 May 2019 Update...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:56.
Find Us