Known and Resolved issues for Windows 10 May 2019 Update version 1903

Page 12 of 49 FirstFirst ... 2101112131422 ... LastLast

  1. Peggsie
    Posts : 51
    Windows 10 Home
       New #110

    HP Probook 430 G5 running Windows 10 Pro Education (retail version). Currently on 1809. Trying to update to 1903 using MCT. Tried 3 times getting error code 0xa0000400. Any suggestions?
      My Computers
    Quote Quote

  3. Caledon Ken
    Posts : 30,187
    Windows 11 Pro x64 Version 23H2
       New #111

    I would start a separate thread with you issue. You will get a better response.

    I can recommend all the standard stuff as you have not mentioned what you've tried. I will note that there are "Blocks" in place for some known issues. If you absolutely need 1903 then you can force the upgrade, myself I would wait.

    Start with Imaging your system so you have something you can restore. Macrium Reflect is one tool.


    Run the online update trouble shooter.

    https://support.microsoft.com/en-ca/...troubleshooter

    Disconnect all devices that are not required for boot.

    Disconnect from the Internet.

    Remove any third party AV.

    Rerun MCT tool and create new ISO on your storage. Mount ISO, (right click iso, click mount) and run setup.

    As I said start a separate thread and report back the outcome of the above steps.
      My Computer
    Quote Quote

  4. Peggsie
    Posts : 51
    Windows 10 Home
       New #112

    Caledon Ken said:
    I would start a separate thread with you issue. You will get a better response.

    I can recommend all the standard stuff as you have not mentioned what you've tried. I will note that there are "Blocks" in place for some known issues. If you absolutely need 1903 then you can force the upgrade, myself I would wait.

    Start with Imaging your system so you have something you can restore. Macrium Reflect is one tool.


    Run the online update trouble shooter.

    https://support.microsoft.com/en-ca/...troubleshooter

    Disconnect all devices that are not required for boot.

    Disconnect from the Internet.

    Remove any third party AV.

    Rerun MCT tool and create new ISO on your storage. Mount ISO, (right click iso, click mount) and run setup.

    As I said start a separate thread and report back the outcome of the above steps.
    I'll just wait for it to come down...really no hurry.
    Last edited by Brink; 07 Jun 2019 at 12:10. Reason: fixed quote box
      My Computers
    Quote Quote

  5. Scottyboy99
    Posts : 2,297
    Windows 10 Pro (64 bit)
       New #113

    I notice blank icons in the internet explorer jump lists. Random , say for example YouTube which is in my frequent list. I’ll right click the IE icon to show jumplist and it’ll show its fav icon but another time it may not (just be blank)

    seems ok on other jump lists such as Mozilla, edge etc. just internet explorer affected. At least it is on mine! Don’t know if anyone has experienced this
    Last edited by Scottyboy99; 07 Jun 2019 at 07:18.
      My Computer
    Quote Quote

  7. VincentJoshuaET
    Posts : 60
    Windows 10 Pro Fast Ring
       New #114

    Night light, f.lux, Color Management are still not working for me, Ryzen 5 3550H, Radeon Vega 8.
      My Computer
    Quote Quote

  8. Anak
    Posts : 1,800
    10 Home 64-bit | v22H2 | Build - 19045.3930
       New #115

    VincentJoshuaET said:
    Night light, f.lux, Color Management are still not working for me, Ryzen 5 3550H, Radeon Vega 8.
    I have flux v4.104 and It's working, barely.

    4days ago I posted; And two weeks ago were the 5/14 updates:
    Anak said:
    All has gone well with 1809 since then, except; For the past two weeks when the display will flicker when resuming to the desktop from sleep (no hibernation) and a refresh cycling of the desktop icons where all icons will blink.
    My feelings are the former is related to the intel graphics and the latter is the desktop window manager process (dwm.exe) trying to keep up with what little demands I place on the system, the desktop will refresh even while sitting at idle and no programs open.
    Since then there's a lot of discussion about making sure your drivers are up-to-date so I ran a check with lenovo's updates checker and found I needed a BIOS update for spectre and meltdown then it was a new intel vga driver v21.20.16.4627 and finally an audio driver. All that went well but I still had the flicker and I remember some threads where a display conditioner like flux will cause flickering so now I'm experimenting with flux turned off for the last two days and I have to say that flux may be causing the flickering problem.

    I want to give it a few more days before I leave it off and if that's the case I'll miss it because I'll miss the yellowish glow flux gives the display. Windows has always been too blue to suit my tastes especially since I found out years ago that blue messes with a person's circadian rhythm.

    btw. There's been two windows update checks since the lenovo updates and still no 1903.
      My Computers
    Quote Quote

  9. Brink
    Posts : 68,937
    64-bit Windows 11 Pro for Workstations
    Thread Starter
       New #116

    Update 6/6: Known issues updated in first post.
      My Computers
    Quote Quote

  10. jeezde
    Posts : 11
    Windows 10
       New #117

    after upgrade PC wakes up from sleep automatically after about 1 1/2 hour, never happened with 1809 ...
      My Computer
    Quote Quote

  11. LEOPEVA64
    Posts : 2,205
    WINDOWS 10 Pro x64 build 19042.685
       New #118

    jeezde said:
    after upgrade PC wakes up from sleep automatically after about 1 1/2 hour, never happened with 1809 ...
    Disable this option in the advanced power settings.
      My Computer
    Quote Quote

  13. Ukajar
    Posts : 29
    Windows 10
       New #119

    Booting problem following 1903 udate attempt.


    Hi

    Tried to update to 1903 but received error 0xc000000e and as a result my laptop will not boot up. Backed up with Macrium prior to the update attempt but obviously the backup cannot be used due to the booting problem.

    Any advice appreciated.
      My Computer
    Quote Quote

 

  Related Discussions
Source: Known issues in Windows 10, version 2004 and Windows Server, version 2004 Resolved issues in Windows 10, version 2004 and Windows Server, version 2004 See also: How to get the Windows 10 May 2020 Update version 2004 What is...
Source: https://docs.microsoft.com/en-us/windows/release-information/status-windows-10-1909 https://docs.microsoft.com/en-us/windows/release-information/resolved-issues-windows-10-1909 See also: How to get the Windows 10 November 2019...
UPDATE 9/26: Windows 10, version 1903 (the May 2019 Update) is designated ready for broad deployment for all users via Windows Update. UPDATE 7/16: Microsoft now auto updating Windows 10 version 1803 and older to 1903 UPDATE 6/18: Microsoft...
Source: What's new for Windows 10 Insider Preview Builds (19H1) | Microsoft Docs What's new in Windows 10, version 1903 IT Pro content | Microsoft Docs See also: How to get the Windows 10 May 2019 Update version 1903 Windows 10 and...
Source: https://techcommunity.microsoft.com/t5/Windows-IT-Pro-Blog/What-s-new-for-IT-pros-in-Windows-10-version-1903/ba-p/622024 See also: How to get the Windows 10 May 2019 Update version 1903 What is new for Windows 10 May 2019 Update...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 23:28.
Find Us




Windows 10 Forums