Windows 10 October 2018 Update version 1809 Now Re-Released

  1. Bree's Avatar
    Posts : 9,914
    10 Home x64 (1809) (10 Pro on 2nd pc)
       1 Week Ago #1110

    My 1803 test machine now sees the 'Features Update to Windows 10, version 1809' when I click 'check for updates'.

    I then restored its Macrium image of 1803 and will leave it to just make automatic checks, so far the automatic windows update has not seen 1809.
      My ComputersSystem Spec


  2. Posts : 623
    ,7,8.1 10TP 10upgrade,MINT
       1 Week Ago #1111

    I have repeatedly failed to get the 1809 update to install in my laptop. It is a Lenovo i3, about two years old with ddr4 ram. When I first got it, I got W10hp 64 running and then took out the hdd and replaced it with an ssd and installed a fresh iso of Windows on it. When that had enough time to prove its stability, I started using the original hdd as backup, cloning the ssd after each major update.
    So far since the middle of December, it has had the following error codes:
    0x80240034 (DEC.)
    0x80070570 (JAN.)
    0x80070002 (JAN.)
    0x80070570 )JAN.)
    Only three fails show up in update history.
      My ComputerSystem Spec

  3. storageman's Avatar
    Posts : 513
    Windows 10 Pro 1809 17763.253
       1 Week Ago #1112

    Has anybody noticed any wireless printer problem with 1809 ? The reason I ask is I have a wireless Canon Multi-function Printer (MB5120). I really don't use it very often, so I normally leave it powered off until I need it. This has worked well in the past.

    Since year end occured a couple of weeks ago, I needed to print several year end reports from my accounting software. I powered the printer on, it displayed that it was ready and proceeded to print. I see a message on the screen "Printer is busy doing another function", so I take a look at the printer and low and behold it is trying to fax the report not print it ? I cancelled the print jobs and recycled the power on the printer and tried to print a test page, same problem. Note that this printer has FAX capability, but is not connected to a phone line.

    Time to trouble shoot.

    If windows boots up after the printer is powered on, every function works as intended. But if the printer is brought
    online and windows is already booted, I end up with this problem. I have validated the correct port names, the printers IP address etc. Everything looks to be set correctly.

    Here are the procedures that I have tried to solve this problem (This is with the PC Booted First).

    1 - You can delete the printer and then re-add it, and the printer will work correctly.
    2 - You can restart the PC and the printer will work correctly.
    3 - I did find some new drivers (from Canon), installed them. It didn't change anything.
    4 - Tried the same tests on 2 other windows 10 (1809) systems (laptop & Tablet), and they do the same thing.
    5 - Tried several different applications, they all fail in this situation.
    6 - Also discovered a new Firmware update for my router and applied it, didn't fix anything.

    I also searched for similar problems, with no success (Lots of other 1809 printer problems, but nothing that resembles my issue).

    I really believe that windows owns this problem since prior to updating to 1809 the printer worked correctly

    I need some ideas to further troubleshoot this problem ?

    Thanks.
      My ComputersSystem Spec

  4.    1 Week Ago #1113

    Bree said: View Post
    My 1803 test machine now sees the 'Features Update to Windows 10, version 1809' when I click 'check for updates'.

    I then restored its Macrium image of 1803 and will leave it to just make automatic checks, so far the automatic windows update has not seen 1809.
    Despite my earlier comments, my main PC (Pro) found 1809 when I set all the Advanced Options appropriately and "Checked for Updates".

    All is good on 17763.253 apart from the aforementioned 1534 Events (User Profile Service) and the well-documented Edge problem Cumulative Update KB4480116 Windows 10 v1809 Build 17763.253 - Jan. 8 Windows Update - Page 11 - Windows 10 Forums

    Doing the same as you @Bree - leaving my Test machines on 1803 to see what happens - for another couple of days at least.
      My ComputersSystem Spec


  5. Posts : 223
    Windows10 Home 64 bit v. 1803 bld. 17134.523
       1 Week Ago #1114

    Bree said: View Post
    My 1803 test machine now sees the 'Features Update to Windows 10, version 1809' when I click 'check for updates'.I then restored its Macrium image of 1803 and will leave it to just make automatic checks, so far the automatic windows update has not seen 1809.
    I'm beginning to think that auto update will never get 1809 and that you will have to do a manual check for updates to get it via WU. It didn't automatically get it this cycle, only the CU came down.
      My ComputerSystem Spec

  6. Bree's Avatar
    Posts : 9,914
    10 Home x64 (1809) (10 Pro on 2nd pc)
       1 Week Ago #1115

    jamis said: View Post
    I'm beginning to think that auto update will never get 1809 and that you will have to do a manual check for updates to get it via WU...
    It has been the case for previous rollouts that it has been done in phases, only those machines most likely to update successfully being in the first phase. I think MS are just being a lot slower at stepping up to the next phase this time round. I expect it will get round to being your turn eventually.
      My ComputersSystem Spec

  7. Caledon Ken's Avatar
    Posts : 12,281
    Windows 10 Pro x64 Build 1809
       1 Week Ago #1116

    tinmar49 said: View Post
    I have repeatedly failed to get the 1809 update to install in my laptop. It is a Lenovo i3, about two years old with ddr4 ram. When I first got it, I got W10hp 64 running and then took out the hdd and replaced it with an ssd and installed a fresh iso of Windows on it. When that had enough time to prove its stability, I started using the original hdd as backup, cloning the ssd after each major update.
    So far since the middle of December, it has had the following error codes:
    0x80240034 (DEC.)
    0x80070570 (JAN.)
    0x80070002 (JAN.)
    0x80070570 )JAN.)
    Only three fails show up in update history.
    Start a new thread please and post a disk management shot. One error points to multiple system partition.

    Click image for larger version. 

Name:	image.png 
Views:	2 
Size:	23.2 KB 
ID:	220631

    Disk Management - How to Post a Screenshot of
      My ComputerSystem Spec

  8.    1 Week Ago #1117

    tinmar49 said: View Post
    I have repeatedly failed to get the 1809 update to install in my laptop. It is a Lenovo i3, about two years old with ddr4 ram. When I first got it, I got W10hp 64 running and then took out the hdd and replaced it with an ssd and installed a fresh iso of Windows on it.
    Strange. I checked for updates and 1809 installed uneventfully on an old laptop of mine that originally came with Vista installed. I had also removed the HDD and substituted SSD... for all the good a SATA 3 drive in a SATA 1 system does.
      My ComputerSystem Spec

  9.    6 Days Ago #1118

    Two of my computers have been updated to version 1809, but my third computer won't update to version 1809 even if I click on Check for updates. There is no reason why it should be blocked from receiving 1809. None of the upgrade blocks are applicable.
    Last edited by Ground Sloth; 6 Days Ago at 01:29.
      My ComputerSystem Spec

  10. Caledon Ken's Avatar
    Posts : 12,281
    Windows 10 Pro x64 Build 1809
       6 Days Ago #1119

    There is no reason. Yesterday I was looking at an old Aspire. He said he was having problems with updates. Clicked checked for updates and he got 1809. My wife's laptop, Asus, won't go. Simple software, no blocks involved
      My ComputerSystem Spec


 

Related Threads
Is this seriously still not fixed and made it to the final release yesterday? I still see completely inaccurate CPU load figures in task manager...
Bluescreen After 1809 October Update in BSOD Crashes and Debugging
I updated my computer to the new October 1809 update and everything went fine. Everything seemed to work just fine, but after I turned off the computer and started it up today I got this bluescreen. Windows 10 would not boot the first time, I shut...
Source: What's new in printing in Windows 10, version 1809 - Microsoft Tech Community - 267182 See also: Windows 10 October 2018 Update now available - Windows 10 Forums Windows 10 version 1809 update history - Known incompatibilities...
Source: What's new for IT pros in Windows 10, version 1809 - Microsoft Tech Community - 263909 See also: Windows 10 October 2018 Update now available - Windows 10 Forums Find out what is new in Windows 10 October 2018 Update and Office -...
Source: .NET Core October 2018 Update | .NET Blog
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:25.
Find Us