Windows 10 October 2018 Update version 1809 Now Re-Released

  1. Ztruker's Avatar
    Posts : 7,037
    Windows 10 Pro X64 1809 17763.134
       2 Weeks Ago #1020

    pietcorus2 said: View Post
    You can also backup your drivers , when everything is ok .
    In case of troubles its easy to recover.........!!
    You can do this with DISM. See Kyhi's post here: Ethernet not working after using recovery drive
      My ComputersSystem Spec

  2. Caledon Ken's Avatar
    Posts : 12,274
    Windows 10 Pro x64 Build 1809
       2 Weeks Ago #1021

    Thanks Rich
      My ComputerSystem Spec

  3.    2 Weeks Ago #1022

    Happy New Year all.
    Meanwhile, as of 1st Jan 2019 , I'm still not being offered 1809 on any of my machines whether I "Check for Updates" or not and however the Advanced Options are set
      My ComputersSystem Spec

  4.    2 Weeks Ago #1023

    Ztruker said: View Post
    You can do this with DISM. See Kyhi's post here: Ethernet not working after using recovery drive
    Thanks for posting that. Tried it and I found out I have 22 drivers that it exported. Seem a normal amount?? Tx
      My ComputerSystem Spec

  5. Ztruker's Avatar
    Posts : 7,037
    Windows 10 Pro X64 1809 17763.134
       2 Weeks Ago #1024

    I have 28 on my Lenovo K450 Desktop so 22 sounds reasonable. Includes 3 Oracle VirtualBox drivers and one Brother printer drivers.
      My ComputersSystem Spec


  6. Posts : 223
    Windows10 Home 64 bit v. 1803 bld. 17134.523
       2 Weeks Ago #1025

    VBF said: View Post
    Happy New Year all.
    Meanwhile, as of 1st Jan 2019 , I'm still not being offered 1809 on any of my machines whether I "Check for Updates" or not and however the Advanced Options are set
    IIRC, MS stated there would not be any CUs or FUs issued until after the holidays. I think it was stated this was due to personnel being away on vacations/holidays, so staffing would not support the updating process. I wasn't expecting WU to do anything until next Tuesday at the earliest. The next real "patch Tuesday" might not occur until February 5th, 2019.
      My ComputerSystem Spec

  7.    2 Weeks Ago #1026

    Dirk Gently said: View Post
    The easiest way to troubleshoot with ShellExView is to use the option to hide all Windows entries from the list. Then disable what's left and test to see if the delay is gone. If it is, great. Re-enable each entry one by one, testing each time, until you find the one causing the issue and leave that one disabled.

    Of course that only helps if it's a third-party extension causing the problem. Judging by how common this issue is it's probably a Windows component that's broken.

    What happens when you try to use the .reg? Do you get a warning of some sort? You would have to be running as Administrator to use it.

    You might want to wait for MS to fix it. For the time being, if there's something you use the 'New' menu for a lot, you might want to see if there's a keyboard shortcut or alternate method to achieve the same end.
    Do you mean the Registry editor? I do have to allow Admin privileges to use it. If .reg is what you mean, I don't know what you mean! LOL
      My ComputerSystem Spec

  8.    2 Weeks Ago #1027

    jamis said: View Post
    IIRC, MS stated there would not be any CUs or FUs issued until after the holidays. I think it was stated this was due to personnel being away on vacations/holidays, so staffing would not support the updating process. I wasn't expecting WU to do anything until next Tuesday at the earliest. The next real "patch Tuesday" might not occur until February 5th, 2019.
    Thank you.
    I was sort of hoping that as 1809 is allegedly "out there" it might trickle through despite the holidays.
    My problem is I have a deadline of Jan 20th to either get 1809 installed and working on my travelling laptop which is Win 10 HOME, OR lock it down until April when I shall no longer be travelling and relying on slow WiFi with no other machines to assist.

    What's the general feeling about manually installing 1809? I understood the consensus was still to "wait for MS to push it"

    If I locked it down, i don't need any other MS updates - I use Norton F/W and A/V with MalwareBytes so MS can leave me alone for 3 months!
      My ComputersSystem Spec

  9.    2 Weeks Ago #1028

    .
    jamis said: View Post
    I wasn't expecting WU to do anything until next Tuesday at the earliest. The next real "patch Tuesday" might not occur until February 5th, 2019.
    You meant February 12, 2019. Patch Tuesday is on the second Tuesday of every month, I suppose the new year's eve celebration is still going on. LOL
    Last edited by IronZorg89; 2 Weeks Ago at 14:57.
      My ComputerSystem Spec

  10. Bree's Avatar
    Posts : 9,904
    10 Home x64 (1809) (10 Pro on 2nd pc)
       2 Weeks Ago #1029

    VBF said: View Post
    What's the general feeling about manually installing 1809? I understood the consensus was still to "wait for MS to push it"
    I have manually upgraded four quite different machines to 1809 with no issues. They range from an old Acer One netbook with an Intel Atom N2600, through the two systems in my specs, up to an i7 Dell Latitude.

    It is always 'safest' to wait in case there are any hardware-specific issues. But as long as you start off by making a Macrium image before you try the upgrade I would go for it...
      My ComputersSystem Spec


 

Related Threads
Is this seriously still not fixed and made it to the final release yesterday? I still see completely inaccurate CPU load figures in task manager...
Bluescreen After 1809 October Update in BSOD Crashes and Debugging
I updated my computer to the new October 1809 update and everything went fine. Everything seemed to work just fine, but after I turned off the computer and started it up today I got this bluescreen. Windows 10 would not boot the first time, I shut...
Source: What's new in printing in Windows 10, version 1809 - Microsoft Tech Community - 267182 See also: Windows 10 October 2018 Update now available - Windows 10 Forums Windows 10 version 1809 update history - Known incompatibilities...
Source: What's new for IT pros in Windows 10, version 1809 - Microsoft Tech Community - 263909 See also: Windows 10 October 2018 Update now available - Windows 10 Forums Find out what is new in Windows 10 October 2018 Update and Office -...
Source: .NET Core October 2018 Update | .NET Blog
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:24.
Find Us