Current Status of Windows 10 October 2018 Update version 1809

  1. Steve C's Avatar
    Posts : 6,367
    Windows 10 Pro 64 bit
       #750

    CountMike said:
    Laser printers are very affordable nowadays and ultimately cheaper in long run but certainly easier to maintain and virtually trouble free comparing to inkjets.
    Integrated mono laser printers and colour scanners are incredibly cheap. I use a Brother one which is fine.
      My Computers

  2. Josey Wales's Avatar
    Posts : 24,850
    Win 10 Pro 19043.964
       #751

    Stitch194 said:
    I've had a HP LaserJet P1102w for about 10 years, changed the cartridge once. It's worked flawlessly on Win 7 & 10.
    I seldom use it, but, I don't have to worry about dry ink cartridges. No use for color printers anymore, the ink is way too expensive to be tossing out 3 dried out cartridges.

    Amazon.com: HP LaserJet Pro P1102w Wireless Laser Printer (CE658A): Electronics
    Thanks but I do not use Amazon, and as I said , I have no use for a printer. If I wanted a picture printed I would put the image on a Flash Drive and take to the Photography store.
      My Computer

  3. IronZorg89's Avatar
    Posts : 2,322
    Windows 10 pro x64-bit
       #752

    Can anyone tell me the reason for that error: 6824 (below) when I run: "dism.exe /Online /Cleanup-Image /StartComponentCleanup"

    Current Status of Windows 10 October 2018 Update version 1809-error-6824-when-running-dism-startcomponentcleanup.png

    I remember @CountMike answering to a post with someone with similar issue that his "Graphics were too slow". That was the first thing I did by downloading NVIDIA GeForce Experience which has updated my Display Adapter to the latest version. After that, I re-ran: "dism.exe /Online /Cleanup-Image /StartComponentCleanup" again and I still got the same error message.

    That's the only issue I am facing with one of my machines (HP Envy). Any help would be greatly appreciated!
    Last edited by IronZorg89; 10 Dec 2018 at 17:49.
      My Computers

  4. magilla's Avatar
    Posts : 3,136
    Windows 10 and windows insider
       #753

    HRPuffnstuff said:
    My 10 year old hp laser jet is working fine in 10 and I get my toner cartridges from amazon for around $10 each so I'm happy. I like my color pages right now.
    I have an HP inkjet which dates to win XP and which uses native driver, along with a multifunction HP officejet using its native driver, and an HP laser jet using its own native driver—all work fine on Win 10.
      My Computer

  5. Ztruker's Avatar
    Posts : 13,519
    Windows 10 Pro X64 20H4 19042.928
       #754

    IronZorg89 said:
    Can anyone tell me the reason of that error: 6824 (below) when I run: "dism.exe /Online /Cleanup-Image /StartComponentCleanup"
    Any info in the dism.log file?

    Edit: I just tried it and I get the same error message. Something to do with the latest 1809 CU as it wasn't there prior to installing it.

    Edit#2: I ran all the usual commands from inside a batch file:

    >dismandsfc.bat
    Mon 12/10/2018
    04:58 PM
    Dism /Online /Cleanup-Image /StartComponentCleanup

    Deployment Image Servicing and Management tool
    Version: 10.0.17763.1

    Image Version: 10.0.17763.168

    [===== 9.8% ]
    [================ 28.6% ]

    Error: 6824

    The operation cannot be performed because another transaction is depending on the fact that this property will not change.


    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

    ...
    Mon 12/10/2018
    05:00 PM
    Dism /Online /Cleanup-Image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 10.0.17763.1

    Image Version: 10.0.17763.168

    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.
    ...
    Mon 12/10/2018
    05:01 PM
    SFC /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection did not find any integrity violations.
    Mon 12/10/2018
    05:07 PM

    Only StartComponentCleanup failed, the other two worked correctly.

    I didn't see anything useful in the dism.log file.
      My Computers

  6. IronZorg89's Avatar
    Posts : 2,322
    Windows 10 pro x64-bit
       #755

    Ztruker said:
    Any info in the dism.log file?

    Edit: I just tried it and I get the same error message. Something to do with the latest 1809 CU as it wasn't there prior to installing it.

    Edit#2: I ran all the usual commands from inside a batch file:

    >dismandsfc.bat
    Mon 12/10/2018
    04:58 PM
    Dism /Online /Cleanup-Image /StartComponentCleanup

    Deployment Image Servicing and Management tool
    Version: 10.0.17763.1

    Image Version: 10.0.17763.168

    [===== 9.8% ]
    [================ 28.6% ]

    Error: 6824

    The operation cannot be performed because another transaction is depending on the fact that this property will not change.


    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

    ...
    Mon 12/10/2018
    05:00 PM
    Dism /Online /Cleanup-Image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 10.0.17763.1

    Image Version: 10.0.17763.168

    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.
    ...
    Mon 12/10/2018
    05:01 PM
    SFC /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection did not find any integrity violations.
    Mon 12/10/2018
    05:07 PM

    Only StartComponentCleanup failed, the other two worked correctly.

    I didn't see anything useful in the dism.log file.
    You had exactly the same reaction as I did, i.e, running: sfc /scannow; Dism.exe /online /Cleanup-Image /restorehealth. No problem there either with both. I even went for a repair install in the hope that the issue would be fixed. No dice, instead after the in-place upgrade, I had to face quite another issue with Microsoft Edge which wouldn't launch no matter what: Repair, Reset and even those command lines in PowerShell:

    Get-AppXPackage -Name Microsoft.MicrosoftEdge | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml” -Verbose}

    Get-AppXPackage -AllUsers -Name Microsoft.MicrosoftEdge | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml” -Verbose}

    I had to roll back with a MR system image backup. I am glad in a way that I am not the only one facing this problem, meaning it is intrinsic somehow to the latest CU

      My Computers

  7. Ztruker's Avatar
    Posts : 13,519
    Windows 10 Pro X64 20H4 19042.928
       #756

    I ran it in Safe Mode and it ran fine, no problems, no need to go back to a previous version. I wouldn't for that error anyway since everything else has been working fine for me since Oct 2nd.

    Mon 12/10/2018
    05:30 PM
    Dism /Online /Cleanup-Image /StartComponentCleanup

    Deployment Image Servicing and Management tool
    Version: 10.0.17763.1

    Image Version: 10.0.17763.168

    [==========================100.0%==========================]
    The operation completed successfully.
    ...
    Mon 12/10/2018
    05:47 PM
      My Computers

  8. Ztruker's Avatar
    Posts : 13,519
    Windows 10 Pro X64 20H4 19042.928
       #757

    I did notice that Shift/Restart no longer works to get to Safe Mode. I used SafeModeCommandPrompt.vbs from WinAeroTweaker to add Safe Mode to the Desktop Context Menu. That still works great. When done, right click and select Exit Safe mode to return to normal mode.

    Can't enter feedback, getting connecting problems:

    Current Status of Windows 10 October 2018 Update version 1809-image.png
      My Computers

  9. IronZorg89's Avatar
    Posts : 2,322
    Windows 10 pro x64-bit
       #758

    Ztruker said:
    I did notice that Shift/Restart no longer works to get to Safe Mode. I used SafeModeCommandPrompt.vbs from WinAeroTweaker to add Safe Mode to the Desktop Context Menu. That still works great. When done, right click and select Exit Safe mode to return to normal mode.

    Can't enter feedback, getting connecting problems:

    Current Status of Windows 10 October 2018 Update version 1809-image.png
    Very kind of you for all the info. I am not even going to try it in SafeMode. I believe you and I'll probably get the same result. Here is only hoping that tomorrow's CU (If there is one; we never know with MS those days..) will fix the problem. Cheers!
      My Computers

  10. Bree's Avatar
    Posts : 19,106
    10 Home x64 (20H2) (10 Pro on 2nd pc)
       #759

    Ztruker said:
    I did notice that Shift/Restart no longer works to get to Safe Mode...
    ...Can't enter feedback, getting connecting problems....

    Shift+Restart gets me to the Advanced Startup options, from where Trouibleshoot > Advanced options > Startup Settings lets me get to Safe Mode. This is the same for my 1809 17763.168 as on my 1803 17134.441.
    Boot to Advanced Startup Options in Windows 10 | Tutorials


    My Feedback Hub works in 1809 too.

    Current Status of Windows 10 October 2018 Update version 1809-image.png


    So does Dism /Online /Cleanup-Image /StartComponentCleanup without using safe mode.

    Current Status of Windows 10 October 2018 Update version 1809-image.png
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:44.
Find Us




Windows 10 Forums