Current Status of Windows 10 October 2018 Update version 1809


  1. Posts : 21
    Win 10 pro
       #1140

    1809 not installing


    I have a Thinkpad T60 (yes, from the stone age ) which I am just out of curiosity updating on Win10. Up until 1803 this has been running smooth and fine with no issues.
    But no 1809-versions will install. I have tried the one offered regular on WU and the 19H1 version from the Insider Preview, same result.
    What happens is that download and installing runs fine up until the first proper restart (i.e. the Lenovo-logo showing). After a few seconds with very little HDD activity (shown on the indicator lamps on top of the keyboard), a Windows logo shows - and no further activity whatsoever. And the machine is completely unresponsive to any keyboard commands and remains so despite left overnight.
    Only a forced shutdown will shut the computer down, and on restart it is reconfiguring version 1803.
    There is no driver issues in "Device Manager"
    Any ideas to resolve this will be greatly appreciated

    / Hans-Henrik
      My Computer

  2. Brink's Avatar
    Posts : 56,230
    64-bit Windows 10 Pro for Workstations build 21354
    Thread Starter
       #1141

    UPDATE for "Current Status" table in first post.

    Microsoft and Morphisec issue has been resolved.
      My Computers

  3. IronZorg89's Avatar
    Posts : 2,225
    Windows 10 pro x64-bit
       #1142

    hhmcsv said:
    I have a Thinkpad T60 (yes, from the stone age ) which I am just out of curiosity updating on Win10. Up until 1803 this has been running smooth and fine with no issues.
    But no 1809-versions will install. I have tried the one offered regular on WU and the 19H1 version from the Insider Preview, same result.
    What happens is that download and installing runs fine up until the first proper restart (i.e. the Lenovo-logo showing). After a few seconds with very little HDD activity (shown on the indicator lamps on top of the keyboard), a Windows logo shows - and no further activity whatsoever. And the machine is completely unresponsive to any keyboard commands and remains so despite left overnight.
    Only a forced shutdown will shut the computer down, and on restart it is reconfiguring version 1803.
    There is no driver issues in "Device Manager"
    Any ideas to resolve this will be greatly appreciated

    / Hans-Henrik
    Why not try to turn off your filter keys and also update your Lenovo keyboard driver. Maybe this can help:

    Lenovo Laptop Keyboard Not Working in Windows 10:


    https://www.drivethelife.com/windows...indows-10.html

    It never hurts to try. One word of caution: don't use their third-party software to update your driver. You are better off going directly to the manufacturer's site for that.
      My Computers

  4. Caledon Ken's Avatar
    Posts : 24,178
    Windows 10 Pro x64 Version 2004
       #1143

    Run the SetupDiag mentioned in this post and see if output tells you anything.

    https://docs.microsoft.com/en-gb/win...dy_UpgradeTips
      My Computer

  5. Anak's Avatar
    Posts : 1,252
    10 Home 64-bit | v2004 | Build - 19041.685 - See other Info below
       #1144

    Thanks Shawn!
    Brink said:
    UPDATE for "Current Status" table in first post.

    Microsoft and Morphisec issue has been resolved.
    Finally! I believe this is what was bogging down my 1809 update. I see by the status box that I have some reading and searching to do. I'm not sure about Morphisec but I know I have some version of Cisco AMP for Endpoints.

    First post
      My Computers


  6. Posts : 2
    Windows
       #1145

    VBF said:
    This is more common than you might think!
    Restarted - Winver 1809 (OS Build 17763.288) (RP Build)

    MANUAL check for updates, "You're up to date"
    UNinstalled KB4476976
    Restarted - Winver 1809 (OS Build 17763.107)
    MANUAL check for updates CU KB4480116 offered - downloaded and installed - restart requested
    Restarted - Winver 1809 (OS Build 17763.253)
    MANUAL check for updates, "You're up to date"

    So all is now good, but WHY did it install that RP update in the first place.......another "Muppetsoft Mystery" brought to you by the truth fairies of Redmond
    OMG you're right! This fixed my 17763.288 build weirdness too. Thanks so much for that!
      My Computer


  7. Posts : 87
    Windows 10 Home 64-bit 1809
       #1146

    I pulled the trigger a couple of days ago, I had 1809 blocked on wushowhide for about a month after it showed up to be installed on the next automatic update.

    Happy to report that I could not find a single problem with the install. Even my XP era HP printer with the archaic (but imo very useful) Solution Center works perfectly as it always has before.
      My Computer

  8. VBF's Avatar
    VBF
    Posts : 577
    Win 10 Pro
       #1147

    yurisevatz said:
    OMG you're right! This fixed my 17763.288 build weirdness too. Thanks so much for that!
      My Computers

  9. LEOPEVA64's Avatar
    Posts : 2,025
    WINDOWS 10 Pro x64 build 19042.685
       #1148

    Current Status of Windows 10 October 2018 Update version 1809-cu.png
      My Computer


  10. Posts : 250
    Windows 10 Pro 64 bit
       #1149

    bumboola said:
    I pulled the trigger a couple of days ago, I had 1809 blocked on wushowhide for about a month after it showed up to be installed on the next automatic update.

    Happy to report that I could not find a single problem with the install. Even my XP era HP printer with the archaic (but imo very useful) Solution Center works perfectly as it always has before.
    The one problem I did have was the need to reinstall an HP4650 printer. It would not be recognized on the local network before simply reinstalling it.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:39.
Find Us




Windows 10 Forums