Windows 10 Insider Preview Fast/Slow/RP Build 17134.5 - April 27 Insider

Page 43 of 92 FirstFirst ... 33414243444553 ... LastLast
  1. slicendice's Avatar
    Posts : 4,123
    Windows 10 Pro x64 v1903 Build 18362.53 (Branch: Release Preview)
       #420

    Barman58 said: View Post
    Just some general Checks :)

    How old are the headsets?
    OLD

    What revision of bluetooth are they using?
    I'm not sure, but it's not BT3.0+

    Do you have HS1 and HS2 working at the same time?
    Yes and NO, makes no difference

    Do you have any other wireless devices in use, Phones, Amazon alexa, etc
    Yes, a lot but even if I close ALL other wireless devices it does not make any difference under Windows

    Older bluetooth devices were susceptible to interference much more that the current batch, the same applies to the bluetooth version.
    The fact that these are two identical models could mean that the possibility of interference could be increased as the both use the same components.
    Bluetooth is susceptible to interference just like any other radio device and with the amount of such devices growing exponentailly these days
    I agree, but I have also brand new BT gamepads and same issue with them under Windows.

    If I switch to Linux I can have my 2 BT headsets, 1 BT speaker and 2 BT gamepads all connected at the same time to same device without any issues, and this is with every BT or any wireless device 1meter from these connected devices. No issues what so ever.


    So I blame Windows for this. It has been like this since BT came to Windows. I don't know how stuff works on Apple devices, but under Linux and Android I have absolutely NO issues, ever.
      My ComputersSystem Spec

  2.    #421

    I have had terrible issues with download speeds from my ISP on PC with 17134. I tested downloads on my android phone and fine e.g. 9 MB/s but on PC 1 MB/s. I tracked down the issue to the virtual switch set up for Hyper-V VMs.

    I did a "reset my network" and it set network connect back to direct wifi drivers, and then download speeds were back to normal.

    Next problem was Hyper-V VMs would not connect to internet as I had removed the virtual switch. Reinstated virtual switch and the download speeds on Host dropped again!

    So I reset again to remove the virtual switched and just used the new "default switch" in Hyper-V which does not go via a virtual switch, and now I can see internet from VMs and Host downloads at full speed.

    Only minor downside as the new default switch is behind NAT, I cannot RDP directly to the VM and more. Not a big deal as I can RDP to host and just see VM with VMconnect.
      My ComputerSystem Spec

  3. slicendice's Avatar
    Posts : 4,123
    Windows 10 Pro x64 v1903 Build 18362.53 (Branch: Release Preview)
       #422

    While I was typing this, my headset suddenly connected to Windows and now stay connected. This connection was not even intentional...they just suddenly decided to work again.

    Confusing!
      My ComputersSystem Spec

  4. slicendice's Avatar
    Posts : 4,123
    Windows 10 Pro x64 v1903 Build 18362.53 (Branch: Release Preview)
       #423

    lx07 said: View Post
    What about hidden devices in device manager? If the devices aren't passing serial numbers Windows can get all confused and start adding #2, #3, #4 etc...
    No hidden BT devices at the moment. I even checked the registry to see what it has found and only thing in existence are these two headsets. Everything looks as it should but I still have these issues every now and then. One minute they work, the next they don't.


    I think I go to the forest tomorrow with my laptop, my mobile and all my BT devices that runs on battery and test them all one at a time to see if it helps solve this issue at all. :)
      My ComputersSystem Spec

  5. slicendice's Avatar
    Posts : 4,123
    Windows 10 Pro x64 v1903 Build 18362.53 (Branch: Release Preview)
       #424

    I currently run both my headsets, my Gear3 Watch, 2 BT controllers at the same time playing on my Note3. No glitches, no pops in sound, no input lag, Watch data syncs real time....NADA ISSUES.

    If I try to connect 1 device to Windows while all other are turned off, I have a success about 1 out of 10 times.
      My ComputersSystem Spec

  6. Cliff S's Avatar
    Posts : 23,924
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
       #425

    Toni, how about settings in advanced power options?
    You know selective suspend, link power state and all?
      My ComputersSystem Spec

  7. slicendice's Avatar
    Posts : 4,123
    Windows 10 Pro x64 v1903 Build 18362.53 (Branch: Release Preview)
       #426

    Cliff S said: View Post
    Toni, how about settings in advanced power options?
    You know selective suspend, link power state and all?
    All at maximum performance/no suspend/no turn off/no sleep. Makes no difference. :)

    Edit: this is the default on all my laptops when PSU is connected.
      My ComputersSystem Spec

  8. Cliff S's Avatar
    Posts : 23,924
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
       #427

    slicendice said: View Post
    All at maximum performance/no suspend/no turn off/no sleep. Makes no difference. :)

    Edit: this is the default on all my laptops when PSU is connected.

    Is there a power management tab in the properties for your headset(again device manager).

    “Allow the computer to turn off this device to save power”
      My ComputersSystem Spec

  9. slicendice's Avatar
    Posts : 4,123
    Windows 10 Pro x64 v1903 Build 18362.53 (Branch: Release Preview)
       #428

    Cliff S said: View Post
    Is there a power management tab in the properties for your headset(again device manager).
    Nope! And by the way...all BT related drivers are MS Generic drivers.
      My ComputersSystem Spec

  10. Cliff S's Avatar
    Posts : 23,924
    Win10 Pro, Win10 Pro N, Win10 Home, Win10 Pro Insider Fast Ring, Windows 8.1 Pro, Ubuntu
       #429

    %SystemRoot%\System32\Winevt\Logs\Microsoft-Windows-UserPnp%4DeviceInstall.evtx


    Paste the above in the Run dialog,
    and it will open Event Viewer to User Plug and Play,
    check for errors there.
    Click image for larger version. 

Name:	image.png 
Views:	3 
Size:	914.8 KB 
ID:	185599
      My ComputersSystem Spec


 
Page 43 of 92 FirstFirst ... 33414243444553 ... LastLast

Related Threads
Source: HoloLens RS4 Preview - Mixed Reality | Microsoft Docs
Source: New flight 17134 released for Insiders Download: Download Windows 10 IoT Core! This is a prototype "dashboard" for Windows Insiders to quickly identify the latest Insider Preview releases for PC, Server, IoT, and SDKs as well as ISO...
UPDATE 11/14: KB4052314 Update for Windows 10 Mobile Build 15254.12 Mobile - Windows 10 Forums Source: Feedback Hub 918290921359253505 How to Update to Windows 10 Mobile Insider Preview Builds for Phones
909435508610129920 908813302481928192 907710903314931712 Source: Announcing Windows 10 Insider Preview Build 16288 for PC Build 15250 for Mobile - Windows Experience Blog Update: Build 16288.1 - Recover a "Won't Boot" Surface Pro 3...
KB3154879 Cumulative Update for Windows 10 Insider Preview (Build 14295): April 18, 2016 Direct download links: x64:...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:28.
Find Us