Windows 10: KB4100375 Windows 10 Insider Release Preview Build 17133.73 - Apr.10 Insider

Page 38 of 102 FirstFirst ... 2836373839404888 ... LastLast

  1. Posts : 1,471
    WinX Pro x64 IP current
       2 Weeks Ago #370

    cereberus said: View Post
    Before resorting to this, remember if you add a flash drive, disable hibernation, do disk cleanup, move data to sd card etc, you can usually upgrade. I strongly recommend making a Macrium Reflect image first (and I mean MR as I tested all the main players and only MR and Easeus worked on 32bit tablets).


    Clean installing on a tablet is fraught with issues as many tablet drivers are not in standard MS isos. Many have had issues with no touch or screen rotation after a clean install because drivers were not available. Even traditional powershell driver backup commands do not always backup these special drivers.
    Thanks for the additional advice. One thing I have to check and see is if they are on X86 or x64, that part I do not recall.

    As for clean installing - trust me, I know all about that. Same applies to older laptops, of which I Have 2 right here that I am running on IP builds as well. Clean installing on them is always a PITA. It's gotten so bad that I have the entire applicable OEM driver repositories already downloaded and saved on my Flash drive if i ever need to clean install to them again.

    The good news is that both of their laptops are identical, so it will be a single set of downloads for those OEM drivers that I may end up needing. The bad news is that I would have to take their machines one at a time and do this, as they need to keep one around for use.

    So, just to be clear, even if I have the .ISO, if it doesn't have the required free space it still will not perform an inplace upgrade, correct?
      My ComputersSystem Spec


  2. Posts : 600
    WINDOWS 10 Pro x64 builds 17134.1, 17650.1001, 16299.371
       2 Weeks Ago #371

    slicendice said: View Post
    Yes, because you are in the insider program.
    The ESD files that the MCT will use have already been leaked, when you create an ISO with those ESD and then you do a completely clean installation with that ISO, that option is managed by the insider program, I'm almost sure that all the people who install SCU through WU next week will see that in their systems, I suppose that for a short period of time because Microsoft will correct it with a cumulative update, let's wait and see if this is confirmed the other week.
      My ComputerSystem Spec


  3. Posts : 2,754
    Windows 10 Pro x64 v1803 Build 17134.1 (Branch: RS4 Release Preview)
       2 Weeks Ago #372

    LEOPEVA64 said: View Post
    The ESD files that the MCT will use have already been leaked, when you create an ISO with those ESD and then you do a completely clean installation with that ISO, that option is managed by the insider program, I'm almost sure that all the people who install SCU through WU next week will see that in their systems, I suppose that for a short period of time because Microsoft will correct it with a cumulative update, let's wait and see if this is confirmed the other week.
    Interesting concept that makes sense.

    Has anybody clean installed this build without entering Insider program? I am curious if this is a build hardcoded thing or just user force enabled option because one is an insider.

    UPDATE: HERE is the link to the original question.

    UPDATE: Never mind, I got my answer HERE
      My ComputersSystem Spec


  4. Posts : 32,448
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)
       2 Weeks Ago #373

    That was nice and smooth! RP FCU>SCU, retaining RP status in 48 minutes, ISO included. Hope the real thing goes as smooth.
      My ComputersSystem Spec

  5.    2 Weeks Ago #374

    LEOPEVA64 said: View Post
    The ESD files that the MCT will use have already been leaked, when you create an ISO with those ESD and then you do a completely clean installation with that ISO, that option is managed by the insider program, I'm almost sure that all the people who install SCU through WU next week will see that in their systems, I suppose that for a short period of time because Microsoft will correct it with a cumulative update, let's wait and see if this is confirmed the other week.
    thx! exactly what i'm experiencing. having done clean installs with either MediaCreationTool.exe /Selfhost and leaked products.cab or current uup.rg-adguarg isos in vms, i still cannot change the feedback frequency despite settings correctly showing that i'm not enrolled in the insider program. already tried gpedit.msc to no avail...
      My ComputerSystem Spec


  6. Posts : 600
    WINDOWS 10 Pro x64 builds 17134.1, 17650.1001, 16299.371
       2 Weeks Ago #375

    zymoticspade said: View Post
    thx! exactly what i'm experiencing. having done clean installs with either MediaCreationTool.exe /Selfhost and leaked products.cab or current uup.rg-adguarg isos in vms, i still cannot change the feedback frequency despite settings correctly showing that i'm not enrolled in the insider program. already tried gpedit.msc to no avail...
    Yes, I had already talked about that in other comments:
    Announcing Windows 10 Insider Preview Fast Build 17128 - Mar. 23
    https://www.tenforums.com/windows-10...ml#post1329523
    https://www.tenforums.com/windows-10...ml#post1329534
      My ComputerSystem Spec


  7. Posts : 1,471
    WinX Pro x64 IP current
       2 Weeks Ago #376

    OK, so I had downloaded 17133.1 on 28 march via UUP DUMP, again on April 3 (the first time that UUP DUMP had the 1803 available, the one that Kari said above was not working yesterday) and again today. None of those three .ISOs are the same, hash checks prove it. The oldest one for IP is also the smallest, while the one from Tuesday (the first 1803) is slightly larger, and the one from today (the current 1803) is the same size as the older 1803 but with a different hash.
      My ComputersSystem Spec

  8.    2 Weeks Ago #377

    johngalt said: View Post
    OK, so I had downloaded 17133.1 on 28 march via UUP DUMP, again on April 3 (the first time that UUP DUMP had the 1803 available, the one that Kari said above was not working yesterday) and again today. None of those three .ISOs are the same, hash checks prove it. The oldest one for IP is also the smallest, while the one from Tuesday (the first 1803) is slightly larger, and the one from today (the current 1803) is the same size as the older 1803 but with a different hash.


    The ISO that I used to make a clean install of 17133 is 4,057,394 kb. Is this like any of yours?
      My ComputerSystem Spec


  • Posts : 1,471
    WinX Pro x64 IP current
       2 Weeks Ago #378

    No, but mine won't match up to most people's as I make the x64 US English AIO - meaning it contains all 4 editions.

    When using UUP2ISO to make the .ISOs, the filename is as follows:

    17133.1.180323-1312.RS4_RELEASE_CLIENTCOMBINED_UUP_X64FRE_EN-US.ISO
      My ComputersSystem Spec

  •    2 Weeks Ago #379

    Hi,

    f14tomcat said: View Post
    That was nice and smooth! RP FCU>SCU, retaining RP status in 48 minutes, ISO included. Hope the real thing goes as smooth.

    Of course it will for it is the real thing already.

    Cheers,
      My ComputersSystem Spec


  •  
    Page 38 of 102 FirstFirst ... 2836373839404888 ... LastLast

    Related Threads
    Hey there i'm on v1803.. (i'm not an Insider) But how can i manually install KB4100375 (OS Build 17133.73).. i have tryed with Cab file's and Always gets errors.. or is it better to just wait when the Official RTM (ISO.) comes available on MCT...
    Read more: HoloLens RS4 Preview - Mixed Reality | Microsoft Docs
    Source: HoloLens RS4 Preview - Mixed Reality | Microsoft Docs
    Read more: Windows 10 Mobile build 10586.338 now hitting Insider Release Preview Ring | Windows Central How to Update to Windows 10 Mobile Insider Preview Builds for Phones How to Choose Fast or Slow Insider Level on your Windows 10 Mobile...
    Read more: Windows 10 Insider Preview build 10154 release notes have leaked
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 12:41.
    Find Us