1.    13 Sep 2015 #1
    Join Date : Sep 2015
    Posts : 8
    Windows 10 Pro

    Hyper-V installation causes boot failure


    Hello all.

    James here. I'm trying to setup Hyper-V, using Kari's tutorial. After I select the modules, Windows installs them and asks for a reboot. I oblige and then the system loops. I have tried three times and have had to restore all three times.

    I have enabled Intel VM in the BIOS. I have tried it with VM-D enabled and disabled, no difference.

    Your help is appreciated.

    Thanks guys and gals.

    James
      My ComputerSystem Spec
  2.    13 Sep 2015 #2
    Join Date : Sep 2015
    Posts : 8
    Windows 10 Pro
    Thread Starter

    I figured it out. DEP was not enabled in the BIOS. After enabling it, Hyper-V works fine.
      My ComputerSystem Spec
  3.    13 Sep 2015 #3
    Join Date : Oct 2013
    A Finnish expat in Germany
    Posts : 13,125
    Windows 10 Pro

    Good to know you got it fixed
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
General Tips Troubleshoot Windows 10 failure to boot using Recovery Environment
How to Troubleshoot Windows 10 failure to boot using Recovery Environment Windows failing to boot can be a daunting experience, the Recovery environment built into Windows 10 is designed to overcome a variety of problems that cause Windows 10 to...
Tutorials
security boot failure
Hi Folks, I made another patrician 40 gigs so I could install windows 7 but I get the issue of security boot failure, what gives??
Software and Apps
One for Kari - Secure boot with HYPER-V question
Hi there I see that although VMware and VBOX can't do it (they can use UEFI) it seems HYPER-V CAN create a level 2 (type 2) VM which can enable secure boot. I want to have a go with this on a W2012 Server HOST. Anything special needed for...
Virtualization
Solved Boot Failure tp 9879
I just installed this upgrade. and found that at the end when it did a reboot that the screen ended with a flashing cursor in the upper left of the screen. I waited for some time and finally did a reboot and held the F12 key and then moved down to...
Installation and Upgrade
Solved DISK BOOT FAILURE. Can't figure this one out!
Had a spare HDD laying around so I thought I'd load 9879 on it. I wanted to be careful to not mess up my 8.1 installation on an SSD so I disconnected it before installing 9879. I wanted to choose OS in Bios at boot time. Install went smoothly and...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:01.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums