New
#11
Sorry, these command seems a bit out of my understanding.Yes, download Win14393PESE_x64 ISO v170116 (64bi file (If your OS is 64-Bit). It will have an ISO file extension.
To make Kyhi's bootable rescue disk you first have to make the flash drive bootable. Follow these steps to do that.
Insert the flash drive into your computer. It is best to use a 32GB or smaller flash drive. We are going to format it to fat32. I believe the size limit for fat32 is 32GB.
Open an Administrative Command Prompt or a Windows Power Shell (Admin) window.
Hit Enter after each command
diskpart
listdisk This will list all the disks connected to your computer and assign a number to each one. It will also display the size of each disk.
select disk * Replace the asterisk with the number assigned to your flash drive. You have to be extremely careful here!!! Double check to make sure it is the number of your flash drive and not your hard drive. Check the size of the disk and make sure it matches the size of your flash drive. The next command will erase everything on your
flash drive. If you accidentally type the number of your hard drive, everything will be erased!!!
clean
create partition primary
select partition 1
active
format fs=fat32 quick
assign
exit
exit
Now the flash drive is bootable. The next thing to do is double click Kyhi's ISO file, the one you downloaded. A windows will come up with all the files in the ISO file. Click "Select All", and "Copy". Next go to the flash drive and click "Paste" to copy all the files onto the flash drive.
The last thing to do is boot from the flash drive. You will be taken to the desktop. Open Windows Explorer and navigate to your personal files. Plug in a portable hard drive or a different flash drive than the one you just made. Copy all your personal tiles to the hard drive or flash drive.
Do I need to revert to "c:" when i type "diskpart"?