Unpair Bluetooth Device on Windows 10 PC  

Page 1 of 2 12 LastLast
    Unpair Bluetooth Device on Windows 10 PC

    Unpair Bluetooth Device on Windows 10 PC

    How to Unpair a Bluetooth Device on Windows 10 PC
    Published by Category: Hardware & Drivers
    02 Nov 2018
    Designer Media Ltd


    How to Unpair a Bluetooth Device on Windows 10 PC


    Bluetooth is a short range wireless technology which enables wireless data transmission between two Bluetooth–enabled devices located nearby each other.

    If one Bluetooth–enabled (turned on) device is in discovery mode and discovers another Bluetooth–enabled device nearby, it can query for its services and choose to establish a Bluetooth link, or a 'pairing relationship', with the other Bluetooth–enabled device. Establishing a Bluetooth link with another Bluetooth–enabled device is also known as pairing.

    Wireless devices with Bluetooth radios must be paired with each other before they can communicate.

    Once the two devices have been paired, they will automatically connect to each other when they are within range and have Bluetooth turned on.

    This tutorial will show you how to remove a paired Bluetooth device on your Windows 10 PC.


    Here's How:

    1. Open Settings, and click/tap on the Devices icon.

    2. Click/tap on Bluetooth & other devices on the left side, and click/tap on the paired Bluetooth device (ex" "SBrink-Phone") you want to remove on the right side. (see screenshot below)

    Name:  Unpair_Bluetooth_device_on_W10_PC-1.jpg
Views: 5355
Size:  73.1 KB

    3. Click/tap on the Remove device button. (see screenshot below)

    Name:  Unpair_Bluetooth_device_on_W10_PC-2.jpg
Views: 5774
Size:  68.1 KB

    4. Click/tap on Yes to confirm. (see screenshot below)

    Name:  Unpair_Bluetooth_device_on_W10_PC-3.jpg
Views: 5113
Size:  11.0 KB


    That's it,
    Shawn



  1. Posts : 1,074
    Windows 10 Home x64 and Pro x86
       08 Feb 2018 #1

    Shawn,

    This might just be a peculiarity of my particular computer or of my particular Bluetooth keyboard but when I found a pairing problem and wanted to repeat pairing, I found that the only way to unpair [so that pairing could find the keyboard again] was to go to Control panel, Devices and printers, select the device, right-click, select Remove device. Re-detection then re-pairing then proceeded correctly.

    Denis
      My ComputerSystem Spec

  2. Brink's Avatar
    Posts : 34,370
    64-bit Windows 10 Pro build 18290
    Thread Starter
       08 Feb 2018 #2

    Thank you Denis. :)
      My ComputersSystem Spec

  3.    28 Apr 2018 #3

    This explains how to Unpair my Headphones from My Windows Laptop. Can anyone explain how to clear the pairing memory of my Headphones? as I want to pair them to a different source.
      My ComputerSystem Spec

  4. Brink's Avatar
    Posts : 34,370
    64-bit Windows 10 Pro build 18290
    Thread Starter
       28 Apr 2018 #4

    Hello Bill @billt4g, :)

    It will depend on the specific instructions for your headphones.

    What is the brand and model number of your Bluetooth headphones?
    Last edited by Brink; 28 Apr 2018 at 15:05.
      My ComputersSystem Spec

  5.    28 Apr 2018 #5

    Hi Brink,

    My Headphones are TaoTronics TT-BH20

    Can you help?
      My ComputerSystem Spec

  6. Brink's Avatar
    Posts : 34,370
    64-bit Windows 10 Pro build 18290
    Thread Starter
       28 Apr 2018 #6

    Well, there's not a whole lot of instructions from your TaoTronics TT-BH20 Bluetooth On Ear Headset manual below, but here is what it says if you haven't already tried.

    https://www.taotronics.com/media/dow...r%20Manual.pdf

    Q: Why can’t I pair the headphones with other Bluetooth devices?
    A: Please check the following points:
    • Make sure your Bluetooth device supports profiles listed.
    • Make sure the headphones and your device are next to each other or within 3 feet / 1 meter.
    • You must get the headphones into pairing mode with the indicator flashing blue and red.
    • Try to reboot your Bluetooth® device.

    Pairing
    1) Make sure the headphones and your Bluetooth® device are next to each other (within 3 feet / 1 meter).
    2) Press and hold the Multifunction Button for 5 seconds to bring the headphones into pairing mode with the LED indicator ashing blue and red.
    3) Activate the Bluetooth function on your phone and search for nearby Bluetooth connections:
    • For iOS: Settings > Bluetooth > On
    • For Android: Settings >Bluetooth: On > Scan for devices
    4) Find “TaoTronics TT-BH20” in the search results. Tap on the name to connect. Once connected, the LED indicator will flash blue once every 3 seconds.

    Note:
    • If a PIN code is required for pairing, try “0000” (four zeroes).
    • The Bluetooth headphones can remember previously paired devices. If you have previously paired the headphones with a device, simply turn on your device and the headphones, they will connect to the last connected device automatically without going into pairing mode.

    Pairing with two devices at the same time
    Although you can pair with two devices, only one of them can play music or make phone calls with the headphones at any time. To pair with two devices:

    1) Follow the previous instructions in the “Pairing” section to pair the TT-BH20 with your rst device.
    2) Turn off the Bluetooth function of your rst device and follow the “Pairing” instructions again to pair and connect to your second device.
    3) With the Bluetooth function on both devices turned on, switch between the two paired devices by pausing the music on the rst device and playing music on the second device.
      My ComputersSystem Spec

  7.    28 Apr 2018 #7

    Thanks Brink,

    I already had that info (I read the online manual). My problem is this;

    I Bought both the Headphones, and their Bluetooth Transmitter. When I connected them up, all worked as it should. A couple of days later I paired the headphones to my laptop, this also was ok. Now however, I can't seem to get the phones paired to the transmitter again. They will pair to my laptop and to my Mobile, but not to the Transmitter (attached to my TV). To test the transmitter, I successfully paired it to a set of jogging earbuds.

    So what I want to do is clear the Headphones Pairing memory, and start from the beginning again.
      My ComputerSystem Spec

  8. Brink's Avatar
    Posts : 34,370
    64-bit Windows 10 Pro build 18290
    Thread Starter
       28 Apr 2018 #8

    I found this below to hopefully reset it.

    bluetooth-transmitter-reset

    If the transmitter cannot pair with your Bluetooth device, please kindly clear the pairing history by pressing the Multifunction Button when the transmitter is off until the LED indicator flashes red and blue simultaneously twice. Then restart the transmitter to pair again.
      My ComputersSystem Spec

  9.    29 Apr 2018 #9

    Thanks Brink,
    I read the info in the link you provided.
    Now all is OK.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Tutorial Categories

Unpair Bluetooth Device on Windows 10 PC Tutorial Index Network & Sharing Instalation and Upgrade Browsers and Email General Tips Gaming Customization Apps and Features Virtualization BSOD System Security User Accounts Hardware and Drivers Updates and Activation Backup and Restore Performance and Maintenance Mixed Reality Phone


Related Threads
Hey all! Sorry if the title seemed angry - More frustrated than anything. Firstly to get the DS4 to work I have used ds4tool, ds4Windows and others to try get this working! So i updated to windows 10 - Mistake i know, Didnt know about...
Hi, I'm just setting up my Windows 10 Desktop computer. I have a Logitech K810 keyboard, it connects via Bluetooth, but I can't get my computer to recognize it. The Logitech site says it's compatible with Windows 10. On my computer, in the...
Trying to pair a bluetooth device (Kindle tablet) to my desktop PC. Bluetooth turned on in both devices. Tablet show my computer's name and provides a passkey that Windows 10 must use. When I go to Devices and Printers, Bluetooth...Windows will...
using Windows 10 in ASUS X555LN notebook with integrated Broadcom Bluetooth driver. After installing the Bluetooth software, when i pair my phone with the PC, my phone appears in the Explorer with additional hard disk partitions (Devices and...
Just realised that, since I upgraded from Win 7 64 Home Premium to Win 10, it has not detected the laptop's Bluetooth device. It doesn't even feature as a device in Device Manager ... not even one with a problem.

Tags for this Thread

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:43.
Find Us