Windows 10: UUP to ISO - Create Bootable ISO from Windows 10 Build Upgrade Files  

Page 44 of 81 FirstFirst ... 34424344454654 ... LastLast

  1. Posts : 316
    Release + Insider Preview Home Build 16179 (VMWare)
       15 Mar 2017 #430

    johngalt said: View Post
    OK, Roger, I'm creating a VM with only a 20 GB VHD to see if in fact the lack of space is causing any issues (which both Kari and I suspect that it is).

    I've got build 15048 installed on there now, and there is 9.46 GB free. However, after downloading the update, I'm betting that there will be less than 3 GB of space free before the update even starts. If this produces similar results to yours, in that several folders are not found in the correct directory, then our theory will be confirmed, and you'll need to clean up a bit of space in order to use the UUP2ISO successfully next time.
    Thanks for taking the time to carry this out and validating your hunches on my behalf.

    I would like to posit that I was able to install the update, it is only when I am trying to create the ISO from the UUP that I am having issues with. Update install fine in other words.
      My ComputerSystem Spec


  2. Posts : 689
    WinX Pro x64 IP v14986
       15 Mar 2017 #431

    Correct. In my previous instance of a VM with such a small HD, it, too, was able to update to newer IP builds without issues, although I would get a nag about low disk space soon after upgrading, which reminded me to run disk cleanup to get that space back.

    That's why I think this will be a perfect test bed.
      My ComputersSystem Spec


  3. Posts : 316
    Release + Insider Preview Home Build 16179 (VMWare)
       15 Mar 2017 #432

    johngalt said: View Post
    Correct. In my previous instance of a VM with such a small HD, it, too, was able to update to newer IP builds without issues, although I would get a nag about low disk space soon after upgrading, which reminded me to run disk cleanup to get that space back.

    That's why I think this will be a perfect test bed.
    Ok, I just wanted to make sure that the VM you created had just enough space to install the update.
      My ComputerSystem Spec


  4. Posts : 689
    WinX Pro x64 IP v14986
       15 Mar 2017 #433

    Ah, this is going to be complicated.

    The VM did not activate. And if you read the screenshot, you'll see why this is hilarious.

    Click image for larger version. 

Name:	WinX IP VM Activation Issue.PNG 
Views:	45 
Size:	202.8 KB 
ID:	125244

    The Learn More link points to https://support.microsoft.com/en-us/...troubleshooter

    Clearly from the screenshot, neither of the first 2 apply - the license is for WinX Pro IP and I installed WinX Pro IP.

    Since there is no activation button, I'm going to try some other things.

    Oh, and I have a lunch date (for my BD). So this will be later.
      My ComputersSystem Spec

  5.    15 Mar 2017 #434

    Hi Kari,
    Using your tutorial, I have successfully added the "Repair Your Computer" option to my 15058 ISO.
    This was more of an exercise for me than a practical change, since I had never updated an ISO before.

    Your tutorials are OUTSTANDING!

    Thanks.

    Kari said: View Post
    I was thinking that it can't be true what I said earlier, that there's nothing I can do for this missing repair option. Two coffees, a walk in nearby beautiful park, two whiskies, and suddenly I realized I've once again had one of those Darwin Awards moments: I've already written a tutorial about how to fix this! And it's really easy.






    OK, those who want to have Repair this computer option available at boot in self made ISO, here's what to do:

    1.) Run UUPtoISO, select option 2 - Create install.wim instead of option 1 - Create ISO:
    If you have already created an ISO with UUPtoISO, there's no need to create a separate install.wim file; your ISO already contains it in Sources folder, use it in next step.

    2.) When install.wim file has been created, make ISO as told in Part Five in this tutorial (link takes you directly to Part Five): Create Windows 10 ISO image from Existing Installation

    That's it. Step 2 above takes a few minutes resulting an "official self made" Insider ISO with Repair this computer option.

    Kari
      My ComputerSystem Spec


  6. Posts : 12,144
    Windows 10 Pro
    Thread Starter
       15 Mar 2017 #435

    vxmartin said: View Post
    Using your tutorial, I have successfully added the "Repair Your Computer" option to my 15058 ISO.
    As you for sure noticed, that was both easy and relatively fast
      My ComputerSystem Spec

  7.    15 Mar 2017 #436

    Yes both. I was surprised how fast it was.
    Only anomaly was that when I booted from the ISO and did a Shift-F10 to get a command prompt it indicated Version 14393 (which I used to modify the 15085 ISO). However, it then did install 15085.

    Kari said: View Post
    As you for sure noticed, that was both easy and relatively fast
      My ComputerSystem Spec


  8. Posts : 12,144
    Windows 10 Pro
    Thread Starter
       15 Mar 2017 #437

    You might next time want to try the last official Inider ISO from Microsoft as ISO files source, currently they are offering build 15048 ISOs.
      My ComputerSystem Spec

  9.    15 Mar 2017 #438

    o
    johngalt said: View Post
    Ah, this is going to be complicated.

    The VM did not activate. And if you read the screenshot, you'll see why this is hilarious.

    Click image for larger version. 

Name:	WinX IP VM Activation Issue.PNG 
Views:	45 
Size:	202.8 KB 
ID:	125244

    The Learn More link points to https://support.microsoft.com/en-us/...troubleshooter

    Clearly from the screenshot, neither of the first 2 apply - the license is for WinX Pro IP and I installed WinX Pro IP.

    Since there is no activation button, I'm going to try some other things.

    Oh, and I have a lunch date (for my BD). So this will be later.
    Ok - the activation message is misleading. You have to click on link 'I have changed my hardware' as a vm counts as a new device.
      My ComputerSystem Spec

  10.    15 Mar 2017 #439

    May do that later this week with the next insider build.

    Thanks Kari for your help!

    Kari said: View Post
    You might next time want to try the last official Inider ISO from Microsoft as ISO files source, currently they are offering build 15048 ISOs.
      My ComputerSystem Spec


 
Page 44 of 81 FirstFirst ... 34424344454654 ... LastLast

Related Threads
As Microsoft has changed the upgrade method from ESD based upgrade to a UUP based, the method told in this tutorial does not work anymore with 15xxx and later builds. Please see UUP to ISO tutorial for a working method: UUP to ISO - Create...
I've asked about this a long time ago. Several personal issue interfered with me getting computer work done. Now I'm starting a telecommuting job in a week, need to clean things up a bit. Just in case I have issues, I'd like to burn off a bootable...
Had tried to update the BIOS on my son's Alienware Aurora R4 so that we could install an upgraded graphics card (980 Ti). Used the Dell Support site - and was upgrading from Bios 7 to Bios 9 - would eventually go up to current version 11 before...
Tried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
Here's an alternative in addition to Kari's Tutorial: ESD to ISO - Create Bootable ISO from Windows 10 ESD File - Windows 10 Forums https://www.youtube.com/watch?v=lJ8SCzhbycA NOTE: It is better to create an ISO contaning install.wim so if you...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:09.
Find Us