Windows 10: UUP to ISO - Create Bootable ISO from Windows 10 Build Upgrade Files  

Page 3 of 81 FirstFirst 123451353 ... LastLast

  1. Posts : 689
    WinX Pro x64 IP v14986
       19 Jan 2017 #20

    Ahh, it was secure boot. I don't remembr ever disabling that in the last several VMs I've made....
      My ComputersSystem Spec


  2. Posts : 12,144
    Windows 10 Pro
    Thread Starter
       19 Jan 2017 #21

    That's one of those defaults Microsoft has got wrong; you need to disable Secure Boot which by default is enabled when creating a Generation 2 Windows 10 VM.
      My ComputerSystem Spec


  3. Posts : 689
    WinX Pro x64 IP v14986
       19 Jan 2017 #22

    Is this a recent change? All my VMs are gen 2 and I haven't had to do that yet.....

    Just curious. It's going along installing now....
      My ComputersSystem Spec


  4. Posts : 12,144
    Windows 10 Pro
    Thread Starter
       19 Jan 2017 #23

    It should work, and has earlier worked, but since a few builds it has been like this: if you want to install 10 on Gen 2 VM, you need to disable secure boot.
      My ComputerSystem Spec


  5. Posts : 689
    WinX Pro x64 IP v14986
       19 Jan 2017 #24

    That must be it, then, as all of my existing VMs are 14965 / 14986 based, IIRC.
      My ComputersSystem Spec

  6.    20 Jan 2017 #25

    I have noticed that the*uup download files contain Pro files and Pro N files. Does this mean you can now use N versions on*the Insider Program?
      My ComputerSystem Spec


  7. Posts : 1,190
    Windows 10 Pro IP Build 16257.1 (Branch: RS3 Release)
       20 Jan 2017 #26

    WOW, this new build converted to ISO is significantly smaller than the previous one (15007 - 4.17GB vs 15014 - 3.80GB). That is HUGE! A lot of cleanup has happened. :-)

    Thanks Kari for the reminder about secureboot, I tend to forget that. Probably because I have not used Hyper-V for a while. :-)
      My ComputersSystem Spec


  8. Posts : 2
    Windows 10 Pro 64b FR
       23 Jan 2017 #27

    Thanks for sharing UUPtoISO.

    The batch file UIPtoISO.cmd hangs up before showing the menu on my computer. Looks like a localization issue (FR).

    After having switched single quotes into double quotes, the menu shows up. After keying "1" however, I'm stuck with:
    Can't open ".\UUPs\~3" read-only: No such file or directory.
    I'm guessing this has to do with line 331:
    for /f "usebackq delims=" %%b in (`find /n /v "" temp\uups_esd.txt ^| find "[%1]"`) do set uups_esd=%%b

    Does this means that the script failed in escaping double quotes?

    It seems in addition that a few pairs of single quotes were "added".
    Name:  2017-01-23 18_18_49.png
Views: 364
Size:  8.6 KB

    Any hint?
    Last edited by qilex; 23 Jan 2017 at 12:22.
      My ComputerSystem Spec


  9. Posts : 12,144
    Windows 10 Pro
    Thread Starter
       23 Jan 2017 #28

    qilex said: View Post
    Any hint?
    Can't say anything before I have tested the batch in other language versions of Windows. Can't think language causing issues, commands in Windows batch files, PowerShell, VB and other scripts are universal, in English.

    If you have not upgraded yet you might want to check if ESD to ISO works for you instead, see this post in ESD to ISO tutorial for instructions in discarding UUP upgrade and download ESD upgrade instead: ESD to ISO - Create Bootable ISO from Windows 10 ESD File

    Unfortunately switching to ESD when UUP upgrade has already been downloaded means that upgrade process starts from beginning, downloading everything again.
      My ComputerSystem Spec


  10. Posts : 2
    Windows 10 Pro 64b FR
       23 Jan 2017 #29

    Kari said: View Post
    Can't say anything before I have tested the batch in other language versions of Windows. Can't think language causing issues, commands in Windows batch files, PowerShell, VB and other scripts are universal, in English.
    Oups!
    Your script is working fine.
    Directory "C:\Rtools\bin" is included in the system PATH and contains a gnu find.exe. Strangely enough, when I manually launch the command prompt with administrator privileges, the correct find.exe from Windows is used. When your script launches a console with runas=1, the gnu find is used. So, the issue was very specific to this computer.
    Thanks again for your time
      My ComputerSystem Spec


 
Page 3 of 81 FirstFirst 123451353 ... LastLast

Related Threads
As Microsoft has changed the upgrade method from ESD based upgrade to a UUP based, the method told in this tutorial does not work anymore with 15xxx and later builds. Please see UUP to ISO tutorial for a working method: UUP to ISO - Create...
I've asked about this a long time ago. Several personal issue interfered with me getting computer work done. Now I'm starting a telecommuting job in a week, need to clean things up a bit. Just in case I have issues, I'd like to burn off a bootable...
Had tried to update the BIOS on my son's Alienware Aurora R4 so that we could install an upgraded graphics card (980 Ti). Used the Dell Support site - and was upgrading from Bios 7 to Bios 9 - would eventually go up to current version 11 before...
Tried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
Here's an alternative in addition to Kari's Tutorial: ESD to ISO - Create Bootable ISO from Windows 10 ESD File - Windows 10 Forums https://www.youtube.com/watch?v=lJ8SCzhbycA NOTE: It is better to create an ISO contaning install.wim so if you...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:11.
Find Us