Windows 10: Add AHCI Link Power Management to Power Options in Windows 10  

    Add AHCI Link Power Management to Power Options in Windows 10

    Add AHCI Link Power Management to Power Options in Windows 10

    How to Add 'AHCI Link Power Management - HIPM/DIPM' to Power Options in Windows 10
    Published by Category: Performance & Maintenance
    13 Mar 2017
    Designer Media Ltd

    Published by


    Brink's Avatar
    Administrator

    Posts: 27,196

    Show Printable Version 


    How to Add "AHCI Link Power Management - HIPM/DIPM" to Power Options in Windows 10

    information   Information
    The AHCI Link Power Management - HIPM/DIPM power option allows you to configure the link power management mode for disk and storage devices that are attached to the system through an AHCI interface. AHCI Link Power Management is a technique where the SATA AHCI controller puts the SATA link to the internal HDD and/or SSD disk into a very low power mode when there.

    You can use the following settings:

    Setting Description
    Active Neither HIPM or DIPM allowed. Link power management is not used.
    HIPM HIPM (Host Initiated Link Power Management) only is allowed
    HIPM + DIPM HIPM and DIPM are allowed
    DIPM DIPM (Device Initiated Link Power Management) only is allowed
    Lowest HIPM, DIPM, and DEVSLP (if DEVSLP is supported by the storage device) are allowed.

    This tutorial will show you how to add or remove the AHCI Link Power Management - HIPM/DIPM setting under Hard disk in Power Options for all users in Windows 10.

    You must be signed in as an administrator to be able to add or remove this setting in Power Options.


    EXAMPLE: "AHCI Link Power Management - HIPM/DIPM" in Power Options
    Name:  AHCI_Link_Power_Management-HIPM-DIPM.png
Views: 8722
Size:  22.2 KB


    Here's How:
    Note   Note
    The .reg files below will modify the DWORD value in the registry key below.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-a2a1-449c-9680-f91c70521c60

    Attributes DWORD

    1 = Remove "AHCI Link Power Management - HIPM/DIPM"
    2 = Add "AHCI Link Power Management - HIPM/DIPM"



    1. Do step 2 (add) or step 3 (remove) below for what you would like to do.


     2. To Add "AHCI Link Power Management - HIPM/DIPM" to Power Options

    A) Click/tap on the Download button below to download the file below, and go to step 4 below.

    Add_AHCI_Link_Power_Management-HIPM-DIPM_to_Power_Options.reg

    download


     3. To Remove "AHCI Link Power Management - HIPM/DIPM" from Power Options

    NOTE: This is the default setting.

    A) Click/tap on the Download button below to download the file below, and go to step 4 below.

    Remove_AHCI_Link_Power_Management-HIPM-DIPM_from_Power_Options.reg

    download

    4. Save the .reg file to your desktop.

    5. Double click/tap on the downloaded .reg file to merge it.

    6. If prompted, click on Run, Yes (UAC), Yes, and OK to approve the merge.

    7. You can now delete the downloaded .reg file if you like.


    That's it,
    Shawn


  1.    26 Jul 2017 #1

    Will there be any downsides to turning this to active? I kept receiving "Reset to device, \Device\RaidPort0, was issued." errors in the event log and someone recommended me to do this.
      My ComputerSystem Spec


  2. Posts : 27,196
    64-bit Windows 10 Pro build 17604
    Thread Starter
       26 Jul 2017 #2

    Hey Bob,

    If you have any issues, you can always set it back to its default setting.
      My ComputersSystem Spec

  3.    06 Nov 2017 #3

    Hi Shawn,
    Thanks a lot for this nice tutorial and the reg files, great help
      My ComputersSystem Spec


  4. Posts : 27,196
    64-bit Windows 10 Pro build 17604
    Thread Starter
       06 Nov 2017 #4

    Glad it could help mate.
      My ComputersSystem Spec


  5. Posts : 1
    Windows 7/10/Ubuntu
       3 Weeks Ago #5

    bobsagetfullhou said: View Post
    Will there be any downsides to turning this to active? I kept receiving "Reset to device, \Device\RaidPort0, was issued." errors in the event log and someone recommended me to do this.
    Hey Bob, did this fix your errors? I'm experiencing the same issue and have a lot of important data saved on this drive that I am unable to backup at this point in time.

    Thanks
      My ComputerSystem Spec


 

Related Threads
Hi, I manage a fleet of 200 linx 8 tablets all running win 10 home. I need to issue a 'fix' that HIBERNATES the tablet rather than entering sleep when pressing the power button I will need to do this programatically - bundled within an...
Hi. If i change in Windows 10 in Power Management from Balanced to Power Saver is this safe for graphic card? I change from Balanced to Power Saver and fps in benchmark went from 180fps to 50fps. Is there any hardware related changes due to swap...
I just got an E540 and upon a Windows install, after updating the AHCI driver, the screen glitches out (crazy colors, lines, etc) and the system locks up. After a reboot, during Windows startup, the screen glitches out again and it completely powers...
Power management? in General Support
When I change the power management to never turn the screen off on my desktop the setting is back to 15 minutes when the Pc is restarted. On my laptop I don't have this problem and I can't find a setting in the BIOS which can be the cause? I use...
Ugraded from windows 10 rtm to windows 10 th2 and lost the option to restore a power plan to its default settings, so when i edit a power plan, i cant reset it to the defaults, is this normal with th2??? The first screenshot is of the option being...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:40.
Find Us