Published by


Brink's Avatar
Administrator

Posts: 16,593

Show Printable Version 


How to Create a Windows To Go Workspace USB in Windows 10

information   Information
Windows To Go is a feature available only in the Windows 10 Pro, Windows 10 Enterprise and Windows 10 Education editions that enables the creation of a Windows To Go workspace that can be booted from a USB-connected external drive on PCs (hosts). The portable Windows To Go workspace will run using the hardware and resources of the host PC.

PCs that meet the Windows 7 or later certification requirements can run Windows Enterprise in a Windows To Go workspace, regardless of the operating system running on the PC. Windows To Go workspaces can use the same image enterprises use for their desktops and laptops and can be managed the same way. Windows To Go is not intended to replace desktops, laptops or supplant other mobility offerings. Rather, it provides support for efficient use of resources for alternative workplace scenarios.

For additional information and details about Windows To Go, see:

This tutorial will show you how to create a Windows To Go workspace USB flash drive in Windows 10.

You must be signed in as an administrator to be able to create a Windows To Go workspace.

Note   Note
Host PC considerations for Windows To Go

When assessing the use of a PC as a host for a Windows To Go workspace you should consider the following criteria:
  • Hardware that has been certified for use with Windows 7 or later operating systems will work well with Windows To Go.
  • Running a Windows To Go workspace from a computer that is running Windows RT is not a supported scenario.
  • Running a Windows To Go workspace on a Mac computer is not a supported scenario.

The following table details the characteristics that the host computer must have to be used with Windows To Go:

Item Requirement
Boot process Capable of USB boot
Firmware USB boot enabled. (PCs certified for use with Windows 7 or later can be configured to boot directly from USB, check with the hardware manufacturer if you are unsure of the ability of your PC to boot from USB)
Processor architecture Must support the image on the Windows To Go drive
External USB Hubs Not supported; connect the Windows To Go drive directly to the host machine
Processor 1 Ghz or faster
RAM 2 GB or greater
Graphics DirectX 9 graphics device with WDDM 1.2 or greater driver
USB port USB 2.0 port or greater

In addition to the USB boot support in the BIOS, the Windows 10 image on your Windows To Go drive must be compatible with the processor architecture and the firmware of the host PC as shown in the table below.

Host PC Firmware Type Host PC Processor Architecture Compatible Windows To Go Image Architecture
Legacy BIOS 32-bit 32-bit only
Legacy BIOS 64-bit 32-bit and 64-bit
UEFI BIOS 32-bit 32-bit only
UEFI BIOS 64-bit 64-bit only


Here's How:

1. If you haven't already, you will need to download a Windows 10 Enterprise ISO file. You can click on the Download button below to download an official Windows 10 Enterprise ISO from the Microsoft TechNet Evaluation Center.

download

2. Mount the Windows 10 Enterprise ISO file.

3. Connect a Windows To Go certified USB flash drive to a USB 3.0 port.

4. Open the Control Panel (icons view), and click/tap on the Windows To Go icon.

5. Select the USB flash drive from step 3 above, and click/tap on Next. (see screenshot below)

Name:  Create_Windows_To_Go_Workspace-1.png
Views: 449
Size:  12.7 KB

6. Click/tap on the Add search location button. (see screenshot below)

Name:  Create_Windows_To_Go_Workspace-2.png
Views: 451
Size:  17.6 KB

7. Select the DVD drive for the mounted ISO from step 2 above, and click/tap on Select Folder. (see screenshot below)

Click image for larger version. 

Name:	Create_Windows_To_Go_Workspace-3.png 
Views:	17 
Size:	52.0 KB 
ID:	105944

8. Select the Windows 10 Enterprise install.wim, and click/tap on Next. (see screenshot below)

Name:  Create_Windows_To_Go_Workspace-4.png
Views: 454
Size:  23.7 KB

9. Do step 10 (No BitLocker) or step 11 (BitLocker) below depending on if you would like to encrypt this Windows To Go workspace USB with BitLocker or not.
Note   Note
It is recommend that you use BitLocker with your Windows To Go drives to protect the drive from being compromised if the drive is lost or stolen. When BitLocker is enabled, the user must provide a password to unlock the drive and boot the Windows To Go workspace, this helps prevent unauthorized users from booting the drive and using it to gain access to your network resources and confidential data. Because Windows To Go drives are meant to be roamed between computers, the Trusted Platform Module (TPM) cannot be used by BitLocker to protect the drive. Instead, you will be specifying a password that BitLocker will use for disk encryption and decryption. By default, this password must be eight characters in length and can enforce more strict requirements depending on the password complexity requirements defined by your organizations domain controller.

You can enable BitLocker while using the Windows To Go Creator wizard as part of the drive provisioning process before first use; or it can be enabled afterward by the user from within the Windows To Go workspace.

See also: Windows To Go FAQs - Why canít I enable BitLocker from Windows To Go Creator?




 10. To Not Use BitLocker with Windows To Go Workspace

A) Uncheck the Use BitLocker with my Windows To Go workspace box, click/tap on Skip, and go to step 12 below. (see screenshot below)

Name:  Create_Windows_To_Go_Workspace-5.png
Views: 455
Size:  24.8 KB


 11. To Use BitLocker with Windows To Go Workspace

Note   Note
A BitLocker password encrypts your Windows To Go workspace USB flash drive. You will be required to enter this password like below every time you boot from your Windows To Go workspace.
Click image for larger version. 

Name:	BitLocker_password.jpg 
Views:	18 
Size:	36.3 KB 
ID:	105941

A) Check the Use BitLocker with my Windows To Go workspace box.

B) Enter and reenter a BitLocker password to use, click/tap on Next, and go to step 12 below.(see screenshot below)
Note   Note
By default, passwords must be at least 8 characters in length.


Name:  Create_Windows_To_Go_Workspace-6.png
Views: 450
Size:  32.0 KB

12. Click/tap on Create when ready to create your Windows To Go workspace. (see screenshot below)

Name:  Create_Windows_To_Go_Workspace-7.png
Views: 450
Size:  21.4 KB

13. Windows will now start creating your Windows To Go workspace. This can take around 10 minutes or more. (see screenshot below)

Name:  Create_Windows_To_Go_Workspace-8.png
Views: 453
Size:  11.3 KB

14. When it has finished, select (dot) Yes or No to have this PC automatically boot from your Windows To Go workspace when connected and you restart the PC, and click/tap on Save and restart to boot from the Windows To Go workspace to finish setting up Windows 10 Enterprise on it. (see screenshot below)
Note   Note
You will always be able to change the Windows To Go Startup Options for your PC to yes or no at any time.

warning   Warning
Be sure to save and close anything that is open before clicking/tapping on Save and restart since your PC will immediately restart afterwards.


Name:  Create_Windows_To_Go_Workspace-9.png
Views: 453
Size:  16.2 KB

15. When your PC has finished booting from your Windows To Go workspace USB for the first time, select your Country or region, App language, Keyboard layout, and Time zone, then click/tap on Next. (see screenshot below)

Click image for larger version. 

Name:	Create_Windows_To_Go_Workspace-10.png 
Views:	30 
Size:	21.3 KB 
ID:	105951

16. Click/tap on Accept for the license terms. (see screenshot below)

Click image for larger version. 

Name:	Create_Windows_To_Go_Workspace-11.png 
Views:	18 
Size:	49.9 KB 
ID:	105952

17. You can now pick up at step 16 here (click on link) to finish setting up Windows 10 Enterprise on your Windows To Go workspace. (see screenshot below)

Click image for larger version. 

Name:	Create_Windows_To_Go_Workspace-12.png 
Views:	20 
Size:	54.2 KB 
ID:	105953

18. You will have up to 90 days to activate the Windows 10 Enterprise on your Windows To Go workspace.
Note   Note
How is Windows To Go licensed?

Windows To Go allows organization to support the use of privately owned PCs at the home or office with more secure access to their organizational resources. With Windows To Go use rights under Software Assurance, an employee will be able to use Windows To Go on any company PC licensed with Software Assurance as well as from their home PC.




That's it,
Shawn