Windows 10: Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts  

Page 1 of 2 12 LastLast
    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts

    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts

    How to Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts
    Published by Category: Performance & Maintenance
    24 Mar 2017
    Designer Media Ltd

    Published by


    Brink's Avatar
    Administrator

    Posts: 20,875

    Show Printable Version 


    How to Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts

    information   Information
    When you start Windows by using a normal startup operation, several applications and services start automatically, and then run in the background. These programs include basic system processes, antivirus software, system utility applications, and other software that has been previously installed. These applications and services can cause software conflicts.

    A clean boot is performed to start Windows by using a minimal set of drivers and startup programs. This helps eliminate software conflicts that occur when you install a program or an update or when you run a program in Windows 10.

    You may also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

    This tutorial will show you how to perform a clean boot to start Windows 10 using a minimal set of drivers and startup programs for troubleshooting application conflicts.

    Note   Note
    You must be signed in as an administrator to be able to perform a clean boot.

    Your computer may temporarily lose some functionality when you perform a clean boot. When you start the computer normally, the functionality returns. However, you may receive the original error message, or experience the original behavior if the problem still exists.

    If the computer is connected to a network, network policy settings may prevent you from following these steps. We strongly recommend that you do not use the System Configuration utility to change the advanced boot options on the computer unless a Microsoft support engineer directs you to do this. Doing this may make the computer unusable.


    CONTENTS:
    • Part One: To Perform a Clean Boot in Windows 10
    • Part Two: To Troubleshoot Software Conflicts in a Clean Boot
    • Part Three: To Restart Computer to Normal Startup after Finished Troubleshooting





    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts PART ONE Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts
    To Perform a Clean Boot in Windows 10

    1. Press the Win+R keys to open Run, type msconfig, and press Enter to open System Configuration.

    2. In the General tab of System Configuration, select (dot) Selective startup, and only uncheck Load startup items. (see screenshot below)

    Name:  Clean_boot-1.png
Views: 23750
Size:  27.3 KB

    3. Click/tap on the Services tab in System Configuration, check the Hide all Microsoft services box, and click/tap on Disable all. (see screenshot below)

    Name:  Clean_boot-2.png
Views: 23516
Size:  32.1 KB

    4. Click/tap on the Startup tab in System Configuration, and click/tap on the Open Task Manager. (see screenshot below)

    Name:  Clean_boot-4.png
Views: 23659
Size:  18.9 KB

    5. Disable all startup items, and close Task Manager. (see screenshot below)

    Name:  Clean_boot-5.png
Views: 23628
Size:  18.7 KB

    6. Click/tap on OK in System Configuration. (see screenshot below step 4)

    7. Click/tap on Restart to restart the computer with a clean boot at startup, and go to step 8 below. (see screenshot below)

    Name:  Clean_boot-6.png
Views: 23528
Size:  6.9 KB






    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts PART TWO Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts
    To Troubleshoot Software Conflicts in a Clean Boot

    8. After the computer has restarted now in a clean boot environment, do step 9 or step 10 below for what is appropriate in your situation.

    9. If you could not install or uninstall a program or an update before you performed the clean boot, try to install or uninstall the program or update again.
    Note   Note
    If you receive the "The Windows Installer service could not be accessed" error during the installation or uninstallation, manually start the Windows Installer service, and then install or uninstall the program or update again.


    A) If the installation or uninstallation is successful, you have resolved your issue. Go to step 19 below to reset your computer to normal startup.

    B) If the installation or uninstallation still fails, that means this issue is not caused by application or service interference. Please post in the appropriate forum here to get further support for your issue.

    10. If you could not run a program before you performed the clean boot, try to run the program again.

    A) If the program runs correctly, this issue is caused by application or service interferences. Go to step 11 below to determine which application or service causes the issue.

    B) If the program still does not run as expected, this issue is not caused by application or service interference. Please post in the appropriate forum here to get further support for your issue.

    11. Press the Win+R keys to open Run, type msconfig, and press Enter to open System Configuration.

    12. Click/tap on the Services tab in System Configuration, check the Hide all Microsoft services box, check the upper half of check boxes in the Service list, and click/tap on OK. (see screenshot below)

    Name:  clean_boot_troubleshoot-1.png
Views: 23482
Size:  36.7 KB

    13. Click/tap on Restart to restart the computer. (see screenshot below)

    Name:  Clean_boot-6.png
Views: 23528
Size:  6.9 KB

    14. After the computer finishes restarting, determine whether the problem still occurs.

    A) If the problem still occurs, repeat steps 11 through 13, but uncheck the lower half of the check boxes in the Service list that you originally checked in step 12.

    B) If the problem does not occur, repeat steps 11 through 13, and check only the upper half of the remaining check boxes that are cleared in the Service list at step 12. Repeat step 14 until you have selected all the check boxes in the Service list at step 12.

    C) If you still experience the problem when only one service is selected in the Service list at step 12, this means that the selected service causes the problem, and you should go to step 18. If no service causes the problem, go to step 15 below.

    15. Repeat step 11 and then step 4 to open your startup items list.

    16. Enable the upper half of items in the Startup list, close Task Manager, and restart the computer. (see screenshot below)

    Name:  Clean_boot-5.png
Views: 23628
Size:  18.7 KB

    17. After the computer finishes restarting, determine whether the problem still occurs.

    A) If the problem still occurs, repeat step 15 and step 16, but disable the lower half of the items in the Startup list that you originally enabled in step 16.

    B) If the problem does not occur, repeat step 15 and step 16, and enable only the upper half of the remaining items in the Startup list at step 16. Repeat step 17 until you have enabled all startup items.

    C) If you still experience the problem after only one Startup item is enabled in the Startup list, this means that the selected startup item causes the problem, and you should go to step 18. If no startup item causes this problem, a Microsoft service probably causes the problem. To determine which Microsoft service may be causing the problem, repeat steps 11 through 14 without checking the Hide all Microsoft services box in each step.

    18. After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, leave the problem startup item disabled in Task Manager or service unchecked in msconfig until it can be resolved. Stop here.






    Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts PART THREE Perform a Clean Boot in Windows 10 to Troubleshoot Software Conflicts
    To Restart Computer to Normal Startup after Finished Troubleshooting

    19. Press the Win+R keys to open Run, type msconfig, and press Enter to open System Configuration.

    20. In the General tab of System Configuration, select (dot) Normal startup. (see screenshot below)

    Name:  normal_boot-1.png
Views: 23756
Size:  21.6 KB

    21. Click/tap on the Services tab in System Configuration, uncheck the Hide all Microsoft services box, and click/tap on Enable all. (see screenshot below)

    Name:  normal_boot-2.png
Views: 23470
Size:  38.9 KB

    22. Click/tap on the Startup tab in System Configuration, and click/tap on the Open Task Manager. (see screenshot below)

    Name:  Clean_boot-4.png
Views: 23659
Size:  18.9 KB

    23. Enable all startup items, and close Task Manager. (see screenshot below)

    Name:  Clean_boot-5.png
Views: 23628
Size:  18.7 KB

    24. Click/tap on OK in System Configuration. (see screenshot below step 22)

    25. Click/tap on Restart to restart the computer back to a normal startup. (see screenshot below)

    Name:  Clean_boot-6.png
Views: 23528
Size:  6.9 KB


    That's it,
    Shawn



  1. Posts : 2,335
    64bit Win 10 Pro ver 1703 Build 15063.296
       24 Feb 2016 #1

    Hi Shawn,

    I have often suggested the clean boot approach to solving problems for people on here and it is now really great to have this tutorial to point them to!

    Thanks
      My ComputerSystem Spec


  2. Posts : 20,875
    64-bit Windows 10 Pro build 16199
    Thread Starter
       24 Feb 2016 #2

    I hope it can help Phil.
      My ComputersSystem Spec

  3.    02 Mar 2016 #3

    Thanks! I'm going to have to do a clean boot in order to resolve an issue on my Windows 10 partition of my new laptop. Hopefully I'll be able to resolve the issue.
      My ComputerSystem Spec


  4. Posts : 6
    Ubuntu 16.04, Windows 10
       03 May 2016 #4

    Is there a way of doing this if you the boot process is not completing? I don’t get as far as the lockscreen.
      My ComputerSystem Spec

  5.    03 May 2016 #5

    just another idea ,
    I use that

    1.
    boot in safe mode with command prompt , not safe mode , not safe mode with networking
    there are a lot of tutorials here or in the rest of www
    [shift+restart] or [restore F8 /bootmenulegacy - my preferred way] or ... ...

    2.
    when command prompt windows is on the screen
    I type [explorer]+[enter] key on keyboard
    or regedit , or notepad , or iexplore ... ...
    explorer will show up with no bloatware loaded
    nothing to check/uncheck before or keep in mind what you have done before for restoring step
    this works in 8.x win also , also in 7 [no need here to restore F8 functionality button]

    question : what is the difference between the 2 ways ?
    [as more cleaned boot way , as better way not simplified way]

    c
      My ComputerSystem Spec


  6. Posts : 20,875
    64-bit Windows 10 Pro build 16199
    Thread Starter
       03 May 2016 #6

    Hello C, and welcome to Ten Forums.

    You could do it that way as well. I just find it better to use selective startup to troubleshoot in since safe boot doesn't load what you select to troubleshoot with.
      My ComputersSystem Spec

  7.    17 Nov 2016 #7

    Many thanks for the tutorial. Coincidentally I also looked at the Microsoft site https://support.microsoft.com/en-us/kb/929135
    and noticed there is a small difference, specifically, the step after launching msconfig.
    Where MS states
    Go to Services tab of the System Configuration dialog box, tap or click to select the Hide all Microsoft services check box, and then tap or click Disable all,

    you use

    "In the General tab of System Configuration, select (dot) Selective startup, and only uncheck Load startup items."

    Maybe they both have the same results?

    One other thing that I have a question about is: when disabling non-Windows startup entries, see on the MS site where they say
    "On the Startup tab in Task Manager, for each startup item, select the item and then click Disable. "

    I think one has to write down/make screenshots of all stuff that is starting up, before ... disabling them, so as to re-enable all these items again afterwards...?

    Or am I overlooking something?
    When I disable them, I assume they remain disabled and I need to manually re-enable the startup entries again, right?
    Which may be a tedious job.

    Or ... is this covered by simply disable/re-enable the "Load startup items" (in the System Configuration->General tab)..??

    Thanks
    =
      My ComputerSystem Spec


  8. Posts : 20,875
    64-bit Windows 10 Pro build 16199
    Thread Starter
       17 Nov 2016 #8

    Hey mate,

    Answers inline.

    tfwul said: View Post
    Many thanks for the tutorial. Coincidentally I also looked at the Microsoft site https://support.microsoft.com/en-us/kb/929135
    and noticed there is a small difference, specifically, the step after launching msconfig.
    Where MS states
    Go to Services tab of the System Configuration dialog box, tap or click to select the Hide all Microsoft services check box, and then tap or click Disable all,

    you use

    "In the General tab of System Configuration, select (dot) Selective startup, and only uncheck Load startup items."

    Maybe they both have the same results?
    Step 2 that you mentioned is to just be more thorough for not loading startup items.

    Step 3 includes what MS stated though.

    tfwul said: View Post
    One other thing that I have a question about is: when disabling non-Windows startup entries, see on the MS site where they say
    "On the Startup tab in Task Manager, for each startup item, select the item and then click Disable. "

    I think one has to write down/make screenshots of all stuff that is starting up, before ... disabling them, so as to re-enable all these items again afterwards...?

    Or am I overlooking something?
    When I disable them, I assume they remain disabled and I need to manually re-enable the startup entries again, right?
    Which may be a tedious job.

    Or ... is this covered by simply disable/re-enable the "Load startup items" (in the System Configuration->General tab)..??

    Thanks
    =
    There's no need to write down anything. The startup items will still be listed when disabled to be able to enable again later while troubleshooting them in steps 16 and 17.
      My ComputersSystem Spec

  9.    1 Week Ago #9

    reply


    I have this problem with clean boot, (i was not able to find this tutorial when i tried to clean boot my system) in PART ONE step 3 I interchanged number 3 and 2, so instead of hiding the Microsoft services first, I clicked the disable button first and then the hide.
    And when i tried to launch the "msconfig" it wont pop-out. How can I fix this?
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
How to Troubleshoot Windows 10 failure to boot using Recovery Environment Windows failing to boot can be a daunting experience, the Recovery environment built into Windows 10 is designed to overcome a variety of problems that cause Windows 10 to...
Windows extremely slow during Clean Boot. in Performance & Maintenance
Hi, I noticed that when I booted into clean boot to solve a issue with a game that seems to have solved itself I just wanted to do other stuff and the PC felt like worm or a snail, it was depressing to see that it took Paint 5 minutes to launch...
I have a problem with a W10 build in that when I boot into Advanced Start-up the some of the options are missing (e.g. Command Prompt). This is the history of my build. 1. Initial install of W7 onto a 3TB hard disk (I subsequently realised I...
Hello, I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media...
Hi, I recently upgraded from a HD7790 to an MSI R9 390 8gb. Every single game has an obvious performance increase, except GTA V. For some reason my old HD7790 can run GTA V on higher settings than my R9 390. Clearly something is wrong, but I'm not...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:44.
Find Us