Page 6 of 17 FirstFirst ... 4567816 ... LastLast

  1. Joined : Oct 2013
    Posts : 17,438
    64-bit Windows 10 Pro build 15014
       2015-08-16 #50

    Yes, that's correct.

    Since you locked in your free Windows 10 by upgrading from an activated Windows 8.1, you will be able to clean install Windows 10 on the PC and have it activated. Be sure to click on "Skip" when asked for a product key.

    Windows 10 - Clean Install
      My System SpecsSystem Spec


  2. Joined : Aug 2015
    Posts : 8
    64-bit Windows 10 Pro
       2015-08-26 #51

    Hi Brink,
    Hope you're well, I am in a bit of a predicament here and have followed all you have said but to no resolve. I have contacted Microsoft's live support, but was told if my operating system is functioning fine to just ignore it. I was hoping you could offer me some assistance on this please?


    Microsoft Windows [Version 10.0.10240]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\Windows\system32>findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"

    C:\Windows\system32>sfc /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection found corrupt files but was unable to fix some
    of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
    example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
    supported in offline servicing scenarios.

    C:\Windows\system32>

    I include my sfc txt to provide more detail.
    I will greatly appreciate you're assistance, as I have been puzzled by this for several hours now.

    TinyUpload.com - best file hosting solution, with no limits, totaly free
      My System SpecsSystem Spec


  3. Joined : Oct 2013
    Posts : 17,438
    64-bit Windows 10 Pro build 15014
       2015-08-26 #52

    Hello Leon, and welcome to Ten Forums.

    Your SFC details show that the file below was found to have a hash mismatch and considered corrupted. The source file in the component store was also found to be corrupted, and was why SFC couldn't replace the file from the Store to repair it.

    C:\Windows\System32\WindowsPowerShell\v1.0\Modules\Kds\Kds.psd1

    If you haven't already, go through the troubleshooting steps in the blue note box at the bottom of OPTION THREE to see if it may allow SFC to repair the file afterwards.

    If you did that already, then try the DISM commands in step 6 or 7 in OPTION ONE below to see if it may help using a Windows 10 ISO as the source instead.

    DISM - Repair Windows 10 Image - Windows 10 Forums
    Last edited by Brink; 2015-08-26 at 09:13. Reason: typo
      My System SpecsSystem Spec


  4. Joined : Aug 2015
    Posts : 8
    64-bit Windows 10 Pro
       2015-08-26 #53

    Brink said: View Post
    Hello Leon, and welcome to Ten Forums.

    Your SFC details show that the file below was found to have a hash mismatch and considered corrupted. The source file in the component store was also found to be corrupted, and was why SFC couldn't replace the file from the Store to repair it.

    C:\Windows\System32\WindowsPowerShell\v1.0\Modules\Kds\Kds.psd1

    If you haven't already, go through the troubleshooting steps in the blue note box at the bottom of OPTION THREE to see if it may allow SFC to repair the file afterwards.

    If you did that already, then try the DISM commands in step 6 or 7 in OPTION ONE below to see if it may help using a Windows 10 ISO as the source instead.

    DISM - Repair Windows 10 Image - Windows 10 Forums

    Hi and thank you, I'm working on it now and I see kds notepad in that file location is completely blank. I will get back to you when I go through these steps provided or when I am stuck. I greatly appreciate your help and can't thank you enough for your time.


    So same results as last night I'm afraid

    C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [==========================100.0%==========================]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    C:\Windows\system32>

    I seem to be having trouble using the iso as a source, I am clearly doing it wrong. Should I have it mounted o no and how do I correctly aim it towards the iso?

    Sadly my earliest restore point has this error also.
    Last edited by Leonchroi; 2015-08-26 at 09:40.
      My System SpecsSystem Spec


  5. Joined : Aug 2015
    Posts : 8
    64-bit Windows 10 Pro
       2015-08-26 #54

    PS C:\Windows\system32> Repair-WindowsImage -Online -CheckHealth


    Path :
    Online : False
    ImageHealthState : Repairable
    RestartNeeded : False

    I tried power shell also

    I can't seem to be able to target the iso as a source I seem to be doing something wrong as it can never find it




    PS C:\Windows\system32> Repair-WindowsImage -Online -RestoreHealth
    Repair-WindowsImage : The restore operation failed. Either the repair source was not found or the component store cannot be repaired.
    At line:1 char:1
    + Repair-WindowsImage -Online -RestoreHealth
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: ( [Repair-WindowsImage], COMException
    + FullyQualifiedErrorId : Microsoft.Dism.Commands.RepairWindowsImageCommand


    PS C:\Windows\system32>
      My System SpecsSystem Spec


  6. Joined : Oct 2013
    Posts : 17,438
    64-bit Windows 10 Pro build 15014
       2015-08-26 #55

    Try the DISM commands in step 6 or 7 in OPTION ONE below instead to see if it may help using a Windows 10 ISO as the source instead.

    DISM - Repair Windows 10 Image - Windows 10 Forums
      My System SpecsSystem Spec


  7. Joined : Aug 2015
    Posts : 8
    64-bit Windows 10 Pro
       2015-08-26 #56

    Yes that;s the step I'm struggling with I'm afraid :/

    Microsoft Windows [Version 10.0.10240]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:1 /limitaccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [==========================100.0%==========================]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    C:\Windows\system32>c:\test\mount\Windows
    The system cannot find the path specified.

    C:\Windows\system32>E:\mount\
    'E:\mount\' is not recognized as an internal or external command,
    operable program or batch file.

    C:\Windows\system32>

    Clearly I'm doing something wrong "E" is iso mounted,embarassing I know but I'm really stuck on this step

    EDIRT just seen "The install.wim file will be in the Sources folder of a mounted Windows 10 ISO file"
      My System SpecsSystem Spec


  8. Joined : Aug 2015
    Posts : 8
    64-bit Windows 10 Pro
       2015-08-26 #57

    C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\sources\install.wim:1 /limitaccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    what is this anyway this corruption and how does it affect me,I originally happened across this corruption after an app I had difficulty uninstalling.I ran sfc after I managed to remove it
    Image Version: 10.0.10240.16384

    [==========================100.0%==========================]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    C:\Windows\system32>
      My System SpecsSystem Spec


  9. Joined : Oct 2013
    Posts : 17,438
    64-bit Windows 10 Pro build 15014
       2015-08-26 #58

    Are you using a mounted ISO file as the source?

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\sources\install.wim:1 /limitaccess

    OR

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:E:\Sources\Install.esd:1 /limitaccess
      My System SpecsSystem Spec


  10. Joined : Aug 2015
    Posts : 8
    64-bit Windows 10 Pro
       2015-08-26 #59

    Brink said: View Post
    Are you using a mounted ISO file as the source?

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\sources\install.wim:1 /limitaccess

    OR

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:E:\Sources\Install.esd:1 /limitaccess
    A mounted iso yes, downloaded from Microsoft, I just right click it and select mount. Should I perhaps try to make a usb key instead and try?


    results using those cmd: C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\sources\install.wim:1 /limitaccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [==========================100.0%==========================]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

    C:\Windows\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:E:\Sources\Install.esd:1 /limitaccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [==========================100.0%==========================]


    Originally I installed an app from the app store and uninstalled it via start right click uninstall.I decided later to try the app again so installed it again but the shortcut to it was not in the start menu anymore so I went through system scrolled installed apps and uninstalled from there.I then ran sfc/scan now to ensure there were no issues.I don't know if that possible has any relation to the above issue or not?
      My System SpecsSystem Spec


 
Page 6 of 17 FirstFirst ... 4567816 ... LastLast


Similar Threads
Tutorial Category
Elevated Command Prompt - Open in Windows 10
How to Open an Elevated Command Prompt in Windows 10 A command prompt is an entry point for typing computer commands in the Command Prompt window. By typing commands in an elevated command prompt, you can perform tasks that require...
Tutorials
Show Us Your Command Centre
This is my study. Also my office when I am working. I call it Sanctuary. 327 328
Chillout Room
Command Prompt at Boot - Open in Windows 10
How to Open a Command Prompt at Boot in Windows 10 A command prompt is an entry point for typing computer commands in the Command Prompt window. By typing commands at the command prompt, you can perform tasks on your computer without using the...
Tutorials
Command Prompt - Open in Windows 10
How to Open a Command Prompt in Windows 10 A command prompt is an entry point for typing computer commands in the Command Prompt window. By typing commands at the command prompt, you can perform tasks on your computer without using the Windows...
Tutorials
Command Prompt gets welcome improvements in Windows 10
Read more...
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:57.
Find Us
Twitter Facebook Google+



Windows 10 Forums