ESD to ISO - Create Bootable ISO from Windows 10 ESD File  

Page 6 of 87 FirstFirst ... 456781656 ... LastLast

  1. Posts : 2,799
    Linux Mint 20.1 Win10Prox64
       #50

    Superfly said:
    Thanx Kari, togundcp... just wanna mention credit also goes to the original scripter abbodi1406 at MDL.

    BTW, Has someone tried the install.esd swap with install.wim of the 9841 iso to produce similar results?
    @Superfly
    I've already tried and it did not work. However, If you download:
    WinReducer Wim Converter - WinReducer
    And convert the esd file into a wim file, overwrite the wim file in 9841 ISO then it will work. During installation it will say it is for Win 10 TP 9841 but the final result will be: 9860

    NOTE: if you want to do it this way, make sure to make a copy of the esd file first because the conversion will replace the esd file with a wim file.

    Cheers.
      My Computer


  2. Posts : 3,453
       #51

    Oh right, thanx for confirming...seems this install.esd is a little different from previous then.

    PS: Just playing devil's advocate... but there is a ESD->WIM script by the same author in case you are interested.

    ESD <> WIM Conversion batch
      My Computer


  3. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #52

    Ran into a copuple problems trying to follow your 9860 prep tutorial.

    First, there is no C:\$Windows.~BT folder. The other two were there.

    No Upgrade key under HKEY_LOCAL_MACHINE\SYSTEM\Setup and no I could not delete the Upgrade subkey.

    ESD to ISO - Create Bootable ISO from Windows 10 ESD File-delw10setup.jpg

    Also, there was a lot of other stuff under the upgrade subkey.

    That's as far as I got.
      My Computers


  4. Posts : 17,661
    Windows 10 Pro
    Thread Starter
       #53

    Could you explain a bit more @Ztruker.

    • What's the start situation? Windows 10 Technical Preview upgraded from Windows 8.1? Clean install of Windows 10 Build 9841?
    • Did you have Show hidden items enabled? C:\$Windows.~BT is a hidden folder.
    • Have you already downloaded the Build 9860 upgrade?


    EDIT

    @Ztruker: Reading your post here I think your issue is related to user rights and / or Group Policy settings. Please tell exactly what kind of install / setup you have (upgrade, clean, which build etc.), what kind and type of user account you are using and so on.
      My Computer


  5. Posts : 481
    Windows 10 Pro
       #54

    I'm sorry, but I have a new problem.

    I got the files in the places you write in the tutorial, and using the downloaded program to change ESD to an bootable ISO works fine. But .... when trying to install from this new .ISO I ran into missing files in the install process!! The original downloaded file from Microsoft is 4.100.497.408 bytes, and the ISO-file created is 3.981.209.600 bytes. As I'm from Denmark, I choose Danish keyboard layout and Danish currency aso in the install process. Maybe something is missing, when selecting something else than English?
      My Computer


  6. Posts : 5,286
    Win 10 Pro x64
       #55

    Burgurne said:
    I'm sorry, but I have a new problem.

    I got the files in the places you write in the tutorial, and using the downloaded program to change ESD to an bootable ISO works fine. But .... when trying to install from this new .ISO I ran into missing files in the install process!! The original downloaded file from Microsoft is 4.100.497.408 bytes, and the ISO-file created is 3.981.209.600 bytes. As I'm from Denmark, I choose Danish keyboard layout and Danish currency aso in the install process. Maybe something is missing, when selecting something else than English?


    If you are using USB, try burning the ISO to DVD (use imgburn program). I had the same problem. Although I did not try Re-making the USB installer, the DVD installer worked well in just one go. It's probably just a corrupted USB but you can try again. If you want to try burning the ISO, be sure to do it at low speed (x8) to avoid errors.
      My Computer


  7. Posts : 17,661
    Windows 10 Pro
    Thread Starter
       #56

    Burgurne said:
    The original downloaded file from Microsoft is 4.100.497.408 bytes, and the ISO-file created is 3.981.209.600 bytes.
    The size of the ISO is correct (EN-US x64 ISO) but I don't understand that "original downloaded file" size, it's simply too big. Which file do you mean (exact file name and extension)?

    Burgurne said:
    As I'm from Denmark, I choose Danish keyboard layout and Danish currency aso in the install process. Maybe something is missing, when selecting something else than English?
    Give me 20 minutes, I'll install using the same ISO and selecting Danish keyboard and formats (jeg både taler og forstår dansk, det vil ikke være noget problem ). I cannot believe this could be an issue but I want to test it to be sure.

    Back in 20 minutes!

    Kari
      My Computer


  8. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #57

    Kari said:
    Could you explain a bit more @Ztruker.

    • What's the start situation? Windows 10 Technical Preview upgraded from Windows 8.1? Clean install of Windows 10 Build 9841?
    • Did you have Show hidden items enabled? C:\$Windows.~BT is a hidden folder.
    • Have you already downloaded the Build 9860 upgrade?


    EDIT

    @Ztruker: Reading your post here I think your issue is related to user rights and / or Group Policy settings. Please tell exactly what kind of install / setup you have (upgrade, clean, which build etc.), what kind and type of user account you are using and so on.
    This is a Windows 10 TP build 9841 VM running under Oracle VB. 2GB RAM, 50GB drive.
    Clean install of Windows 10 TP X64.
    Using local account.
    All updates applied.
    Tried to update to build 9860 and it failed, no idea why as there were no clues left other than this message:

    ESD to ISO - Create Bootable ISO from Windows 10 ESD File-w10updatefail.jpg

    Cleaned up everything I could following the directions in this thread then started the update again.
    I did not have to do the download again, just started the install. This time it worked perfectly.

    Checked C:\RecoveryImage and it has install.esd so getting rid of the directories and marker file worked for me and I got the 9860 install.esd file. I will next create a ISO to save.

    I wonder how much of what you described has to be deleted to make this work? Would getting rid of just C:\RecoveryImage be enough? I should have tried it.
      My Computers


  9. Posts : 17,661
    Windows 10 Pro
    Thread Starter
       #58

    Ztruker said:
    This is a Windows 10 TP build 9841 VM running under Oracle VB. 2GB RAM, 50GB drive.
    Clean install of Windows 10 TP X64.
    Using local account.
    All updates applied.
    Tried to update to build 9860 and it failed, no idea why as there were no clues left other than this message:
    ...

    ...
    I wonder how much of what you described has to be deleted to make this work? Would getting rid of just C:\RecoveryImage be enough? I should have tried it.
    OK. You failed to upgrade a cleanly installed Win10, decided to follow instructions for Win10 upgraded from 8.1 and wondered why it did not work?

    I understand it worked now? If so, everything is OK. The marker file is important if you want to upgrade to next build keeping the ESD or WIM file from previous build; other than that it has no purpose. I have deleted it from each Win10 9860 already now, to be sure that when the next build is released the old ESD will be replaced with a new one.

    Your original upgrade error code points to a third party AV, firewall or such disabling upgrade process.
      My Computer


  10. Posts : 17,661
    Windows 10 Pro
    Thread Starter
       #59

    badrobot said:
    Burgurne said:
    I'm sorry, but I have a new problem.

    I got the files in the places you write in the tutorial, and using the downloaded program to change ESD to an bootable ISO works fine. But .... when trying to install from this new .ISO I ran into missing files in the install process!! The original downloaded file from Microsoft is 4.100.497.408 bytes, and the ISO-file created is 3.981.209.600 bytes. As I'm from Denmark, I choose Danish keyboard layout and Danish currency aso in the install process. Maybe something is missing, when selecting something else than English?


    If you are using USB, try burning the ISO to DVD (use imgburn program). I had the same problem. Although I did not try Re-making the USB installer, the DVD installer worked well in just one go. It's probably just a corrupted USB but you can try again. If you want to try burning the ISO, be sure to do it at low speed (x8) to avoid errors.
    +1.

    To be sure I tested now with 9860 x64 EN-US ISO created as told in this tutorial, burned to USB, selecting formats: Denmark, keyboard: Danish. No issues.
      My Computer


 

Tutorial Categories

ESD to ISO - Create Bootable ISO from Windows 10 ESD File Tutorial Index Network & Sharing Instalation and Upgrade Browsers and Email General Tips Gaming Customization Apps and Features Virtualization BSOD System Security User Accounts Hardware and Drivers Updates and Activation Backup and Restore Performance and Maintenance Mixed Reality Phone


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:07.
Find Us




Windows 10 Forums