Windows 10: ESD to ISO - Create Bootable ISO from Windows 10 ESD File  

Page 47 of 85 FirstFirst ... 37454647484957 ... LastLast
  1.    06 Jan 2016 #460

    Hello @GhostNappa, there is a bit of confusion here (which I added to so sorry - and especially to @Kari).

    The point of this tutorial is not to convert ANY file that happens to have a .esd suffix but only those as described in the tutorial.

    So, if you got your .esd as described in this turorial then you can convert it using the tool described.

    However, if you download an ISO through the MCT then you'll have a different form of .esd which doesn't require any decoding (it isn't encrypted) or if you downloaded an ISO from TechBench it will have a .wim.

    In this case this tutorial is not for you. It took me a long time to understand this - this tutorial is only for what it says it does.

    Not decrypting things that are not encrypted, just decrypting things that are... @Kari, hope that is correct now)
      My ComputerSystem Spec

  2.    06 Jan 2016 #461

    Thank you! I got my Install.esd from My Pc\C:\$WINDOWS.~BT\Sources
      My ComputerSystem Spec

  3.    06 Jan 2016 #462

    lx07 said: View Post
    Hello @GhostNappa, there is a bit of confusion here (which I added to so sorry - and especially to @Kari).

    The point of this tutorial is not to convert ANY file that happens to have a .esd suffix but only those as described in the tutorial.

    So, if you got your .esd as described in this turorial then you can convert it using the tool described.

    However, if you download an ISO through the MCT then you'll have a different form of .esd which doesn't require any decoding (it isn't encrypted) or if you downloaded an ISO from TechBench it will have a .wim.

    In this case this tutorial is not for you. It took me a long time to understand this - this tutorial is only for what it says it does.

    Not decrypting things that are not encrypted, just decrypting things that are... @Kari, hope that is correct now)

    So how would I go about fixing the issue error ox800f081f


    also my Install.esd seems to be damaged, because the decrypt works until I put the install.esd into the same folder or direct it to it. Is there any possible fix for this? I've tried reinstalling windows, but everything comes back the same. I do not wish to format my drive, as it would take forever to do so.

    if I run DISM, the error pops up. If I run sfc /scannow there is another corrupted errors that cannot be fixed, including a opencl.dll corrupted file in my sfc.details.txt.

    These are pretty much all the problems i'm having, if anyone can help that would be appreciated.

    Thanks in advance

    I feel like i've tried everything it's really beginning to get the best of me
      My ComputerSystem Spec


  4. Posts : 21,930
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)
       06 Jan 2016 #463

    GhostNappa said: View Post
    So how would I go about fixing the issue error ox800f081f


    also my Install.esd seems to be damaged, because the decrypt works until I put the install.esd into the same folder or direct it to it. Is there any possible fix for this? I've tried reinstalling windows, but everything comes back the same. I do not wish to format my drive, as it would take forever to do so.

    if I run DISM, the error pops up. If I run sfc /scannow there is another corrupted errors that cannot be fixed, including a opencl.dll corrupted file in my sfc.details.txt.

    These are pretty much all the problems i'm having, if anyone can help that would be appreciated.

    Thanks in advance
    Maybe I'm missing something, but if you've re-installed Windows, you must have an ISO. Why are you trying to crate another one? Opencl.dll can be ignored. If you are trying to run DISM with a "ESD" format ISO file, it will fail. Only "WIM" format ISO will work with DISM repair. Again, why are you trying to create an ISO? A little confused... Tomcat.
      My ComputersSystem Spec

  5.    06 Jan 2016 #464

    f14tomcat said: View Post
    Maybe I'm missing something, but if you've re-installed Windows, you must have an ISO. Why are you trying to crate another one? Opencl.dll can be ignored. If you are trying to run DISM with a "ESD" format ISO file, it will fail. Only "WIM" format ISO will work with DISM repair. Again, why are you trying to create an ISO? A little confused... Tomcat.
    When I run sfc /scannow

    I get Windows Resource Protection found corrupt files but was unable to fix some of them."

    This essentially led me to using
    dism /online /cleanup-image /restorehealth
    W
    Which produced error ox800f081f

    After further research I found that, the fix was doing this tutorial. I did this tutorial and read all comment got up until ready to run decrypt as administrator and found out that my install.esd is damaged.

    Idk about the opencl.dll, I think it has something to do with my graphics card which has been behaving strangely recently.
      My ComputerSystem Spec

  6.   My ComputersSystem Spec

  7.    06 Jan 2016 #466

    Thank you for your reply. I tried to Mount it and the install.wim was corrupted. So I couldn't after following those instructions.
      My ComputerSystem Spec


  8. Posts : 21,930
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)
       06 Jan 2016 #467

    GhostNappa said: View Post
    Thank you for your reply. I tried to Mount it and the install.wim was corrupted. So I couldn't after following those instructions.
    This was from a brand new ISO that you just downloaded?
      My ComputersSystem Spec

  9.    06 Jan 2016 #468

    Sorry. I was running the DISM command to access the corrupted file and not the file I downloaded from the mounted ISO.

    THANK YOU SO MUCH, it worked. Been working on this problem for I don't know how many days. Even the Opencl.dll fixed because of this!!!
      My ComputerSystem Spec

  10.    06 Jan 2016 #469

    One more thing if I may ask, I know it might not be relevant but the computer now says Checking for media present...no media present when starting up..
    No big issues with this but it's annoying to see. It's not set as my main start up in BIOS do you know how to fix this?

    Thanks in advance
      My ComputerSystem Spec


 
Page 47 of 85 FirstFirst ... 37454647484957 ... LastLast

Related Threads
Bootable File Manager? in General Support
Hello, is there any bootable file manager out there because I want to do the following things before installing Windows. 1. Format my C:\ drive with Windows 7.1 2. Move contents from my F:\ drive to C:\ 3. Install Windows 10 of F:\ This is...
How to Create a System Information File in Windows 10 MSINFO contains in depth pertinent information about your system and is often used by Seven Forums members when helping users solve issues, especially during debugging BSOD crash...
Here's an alternative in addition to Kari's Tutorial: ESD to ISO - Create Bootable ISO from Windows 10 ESD File - Windows 10 Forums https://www.youtube.com/watch?v=lJ8SCzhbycA NOTE: It is better to create an ISO contaning install.wim so if you...
I just wondered if anyone had had any issues creating a bootable USB using the Download Tool with the 9926 .iso? I've tried multiple times now but it just gets stuck at 94% and I end up having to close the program down via Task Manager. Someone I...
Rufus - Create bootable USB drives the easy way
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:50.
Find Us