Page 13 of 16 FirstFirst ... 31112131415 ... LastLast

  1. Joined : Oct 2015
    Posts : 5
    Windows 10 Insider
       2015-10-08 #120

    it actually didn't at all... ended up installing 7 (again!) after 10 failed to recognize the GenuineToken.xml file... Oddly, WU is still not functioning. When the WU service is running, the CPU goes to 100% and stays there until it overheats and shuts down. No updates ever get installed or even offered, but the service takes over 2gb of ram at times. This is a nightmare. lol. (mobile now, I'll post more later in a new thread probably)
      My System SpecsSystem Spec


  2. Joined : Aug 2015
    Posts : 76
    Windows 10 Pro
       2015-10-08 #121

    Maybe look at Repair or Reinstall Windows Update
    I have used the Fix It Tool 50202 (aggressive mode) - Option 2 in the tutorial - to fix WU a couple times. Once after I fragged WU trying to hide all the WinX Upgrade updates & once after I initiated a WinX upgrade but then decided to cancel.

    Edit: 11/15/15 - sorry I should have suggested this link, instead:
    Windows Update - Reset In Windows 10
    Last edited by dogpark; 2015-11-15 at 14:31.
      My System SpecsSystem Spec


  3. Joined : Oct 2015
    Posts : 5
    Windows 10 Insider
       2015-10-08 #122

    dogpark said: View Post
    Maybe look at Repair or Reinstall Windows Update
    I have used the Fix It Tool 50202 (aggressive mode) - Option 2 in the tutorial - to fix WU a couple times. Once after I fragged WU trying to hide all the WinX Upgrade updates & once after I initiated a WinX upgrade but then decided to cancel.
    Ran that, along with another FixIt, neither worked. They both find issue(s) and "fix" them, but WU still fails. Repeated runs of the tools keep finding and "fixing" the same errors. I'm using the MediaCreator tool now from a clean reinstall of 7 (where WU still won't work....) to just jump to 10 bypassing WU, but I'm at work and can't do anything more until later.
      My System SpecsSystem Spec


  4. Joined : Oct 2015
    Posts : 5
    Windows 10 Insider
       2015-10-10 #123

    dstruct2k said: View Post
    Ran that, along with another FixIt, neither worked. They both find issue(s) and "fix" them, but WU still fails. Repeated runs of the tools keep finding and "fixing" the same errors. I'm using the MediaCreator tool now from a clean reinstall of 7 (where WU still won't work....) to just jump to 10 bypassing WU, but I'm at work and can't do anything more until later.
    Update: did a clean install of W7, ran WU, and upgraded to W10 using the "standard" WU method. All is finally good.
      My System SpecsSystem Spec


  5. Joined : Aug 2015
    Posts : 76
    Windows 10 Pro
       2015-10-10 #124

    dstruct2k said: View Post
    Update: did a clean install of W7, ran WU, and upgraded to W10 using the "standard" WU method. All is finally good.
    Good man. Hopefully Windows 10 is the last upgrade & everyone can rest easy once it's installed. Or at least I will.
      My System SpecsSystem Spec


  6. Joined : Dec 2015
    Chicago
    Posts : 6
    Windows 10 Pro x64
       2015-12-02 #125

    Cliff S said: View Post
    WMP will stay, it's WMC that walks the plank.
    Yes, WMP will stay, but it won't play DVDs. I wish Microsoft would've kept that option in WMP like it had for Windows 7.
      My System SpecsSystem Spec


  7. Joined : Mar 2015
    Messinias, Greece
    Posts : 180
    Win 10 64bit with AU
       2015-12-03 #126

    So many choices...


    Great tutorial as usual Shawn, but my first thought was that there are far too many options there, especially for us less techie types.

    Anyway, after a few months without reliable internet we're now starting to look at upgrading, and wondering which way to go.

    One laptop (on which the 'Get W10 offer was clicked) is now regularly getting the screen below (sorry it's at the bottom, I'm still having challenges importing files in this forum). No idea why this has started to appear; we don't believe W10 has downloaded yet. We've used your reg file fix to set UpdateOS to 'disable' and thought that would stop this appearing but it hasn't. Should we just go for it or would you recommend a different method to upgrade?

    I was wondering about the 'mounting the iso' option as an alternative. Is there any real difference between this and using the Media Creation Tool? And if we choose the mounting method (on any machine) do we need to do anything about Secure Boot / UEFI options? These are mentioned in a 'warning' box in the tutorial, but if we're mounting an iso we're not booting from a USB right?

    I don't want to do a clean install at this stage as I assume this wipes all 3rd party programs, and anyway the laptop had a clean install of W8.1 just a few months ago so is relatively uncluttered.

    And good to see you're in Christmas mode already
      My System SpecsSystem Spec


  8. Joined : Oct 2013
    Posts : 17,413
    64-bit Windows 10 Pro build 15007
       2015-12-03 #127

    Hello Maggy,

    Yeah, there are a lot of options to upgrade with. It really doesn't matter which option you use since the end results are the same.

    I would still recommend to temporarily disable secure boot since the installation will restart to finish at boot. It's best to not chance it to interfere.
      My System SpecsSystem Spec


  9. Joined : Mar 2015
    Messinias, Greece
    Posts : 180
    Win 10 64bit with AU
       2015-12-03 #128

    Thanks Shawn,

    I will give it a go and see what happens
      My System SpecsSystem Spec


  10. Joined : Oct 2013
    Posts : 17,413
    64-bit Windows 10 Pro build 15007
       2015-12-03 #129

    I hope it goes smoothly for you. Please let us know how it went.
      My System SpecsSystem Spec


 
Page 13 of 16 FirstFirst ... 31112131415 ... LastLast


Similar Threads
Tutorial Category
List Compelling Reasons to upgrade to Upgrade to Windows 10 for Novice
I feel that we as experts on this forum should try and persuade any novices who are not sure about upgrading to Windows 10 should help explain why its good for them to upgrade from earlier versions. So I'll start off: Latest security ...
General Support
Windows 10 installation has failed.
I'm trying to install Windows 10 IP. However this message pops out. 21674 No idea what's happened. My harddrive has 38GB free. Here's my setuperr.log 2015-06-16 12:02:28, Error MOUPG CSystemHelper::CheckConnectedStandby(642):...
Installation and Setup
Potential installation or upgrade problem
Currently running Windows 8.1 on a 20gb partition. I would like to upgrade to windows 10 when it is released. Question is how? I suspect 20gb isn't enough as 16gb is already taken up by win 8.1. I installed win 8.1 as a clean install then...
Installation and Setup
W8.1 to W10 Upgrade installation taking far to long.
I fancied trying the upgrade route, really as an educational exercise to see how well it would work, but am finding its way to slow. I suspect some process is running somewhere that is crippling the install procedure. My 8.1 install is a very...
Installation and Setup
Solved Installation upgrade problem
Have been running the W10 preview since its release without problems. Today tried upgrading to the new version without success. In desperation I deleted the early version installed on a separate SSD thinking I could get a reinstallation using my...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:54.
Find Us
Twitter Facebook Google+



Windows 10 Forums