Move Users Folder Location in Windows 10  


  1. Posts : 3
    Windows 10 Pro
       #800

    Evidently the location of the install.wim file I gave the unattend.xml file made Windows 10 unhappy as it hung up for about an hour until I turned it off and it is now bootlooping at the windows startup screen. Any idea on how to re-do either the sysprep from outside of windows or get it to cancel out of whatever it's trying to do without having to do a clean install? I have the windows ADK and PE as well as Parted Magic and a couple of other recovery utilities if that helps with solutions at all.

    Best regards,
    Andrew
      My Computer


  2. Posts : 3
    Windows 10 Pro
       #801

    install.wim/windows iso located on flash drive leads to bootlooping


    I am running into an issue where the machine enters a boot loop at the black windows loading screen. I tried doing the process listed on the first page and did sysprep with the Windows 10 ISO installed to a bootable flash drive. Unfortunately the system hung up at the Windows loading screen for about an hour until I force restarted it. After to that it continues to loop at the windows loading screen. I have booted up parted magic and everything data-wise appears to be all there, I'm wondering if there's any way to fix this or to re-sys-prep it from outside of Windows (WinPE maybe?) using a DVD instead of a flash drive as the source of install.wim to get it to finish the process. Thanks again.

    -Andrew
      My Computer


  3. Posts : 17,661
    Windows 10 Pro
    Thread Starter
       #802

    Hi Andrew, welcome to Ten Forums.

    A boot loop always indicates an error in either the answer file (the xml script), or actions taken just before the sysprep. A most typical error is that although user's target drive for the Users folder is set to be let's say E: and user can see this E: drive in Audit Mode, when sysprep is then run system sees it as D: or F: and cannot find E:.

    Another quite typical error is that target drive contained system folders from another Windows installation.

    Best to do is to restore a backup made before Sysprep and either try again or forget this method. From the boot loop it's about impossible to exit successfully.

    Of course, as mentioned several times in this thread, a couple of reboots is totally normal, Windows always starting the OOBE from beginning asking for language options. I never get worried before the fourth or fifth reboot.
      My Computer


  4. Posts : 3
    Windows 10 Pro
       #803

    Kari said:
    Hi Andrew, welcome to Ten Forums.

    A boot loop always indicates an error in either the answer file (the xml script), or actions taken just before the sysprep. A most typical error is that although user's target drive for the Users folder is set to be let's say E: and user can see this E: drive in Audit Mode, when sysprep is then run system sees it as D: or F: and cannot find E:.

    Another quite typical error is that target drive contained system folders from another Windows installation.

    Best to do is to restore a backup made before Sysprep and either try again or forget this method. From the boot loop it's about impossible to exit successfully.

    Of course, as mentioned several times in this thread, a couple of reboots is totally normal, Windows always starting the OOBE from beginning asking for language options. I never get worried before the fourth or fifth reboot.
    Kari,
    Thanks so much for the welcome and the quick response. That's what I was afraid was the case so I guess I'll just offload as many files as I can and then just go ahead and follow the procedure for the clean install. Thanks again for the help and the great tutorial!

    -Andrew
      My Computer


  5. Posts : 17,661
    Windows 10 Pro
    Thread Starter
       #804

    You are welcome. The clean install method is always the preferred one. On an existing installation there might be so many underlying issues preventing this or any other a bit more "sophisticated" customization to work.
      My Computer


  6. Posts : 3
    Win 7 64 Ultimate
       #805

    New PC recommendations


    Kari, I hope all is well. I have successfully used your user relocation method for several years now on Win 7 and then Win 10 machines. I am not a Windows expert but have been able to follow the instructions and implement the approach. Guess is just like following a recipe.

    I have a couple of questions:
    1. I am considering getting a new PC and would replace the ssd and potentially the data drive. I was wondering what the easiest method of migrating was. From what I can see it still seems to be method one, a clean install. It would be great if I could image the drives, but as you have commented there are likely legacy items that mean a clean start is better.
    2. Any special backup tips? I guess image the C drive and I have a backup of the data drive.


    Thank you for all the support over the years. It is much appreciated.

    Best
    Chris
      My Computer


  7. Posts : 17,661
    Windows 10 Pro
    Thread Starter
       #806

    paveway7 said:
    • I am considering getting a new PC and would replace the ssd and potentially the data drive. I was wondering what the easiest method of migrating was. From what I can see it still seems to be method one, a clean install. It would be great if I could image the drives, but as you have commented there are likely legacy items that mean a clean start is better.
    I am one of those old school geeks who always prefer a fresh clean install over migrating old Windows setup to new hardware. My sincere recommendation is to do a clean install on new PC, start from scratch.

    That being said, Windows 10 is pretty good in handling redeployment. It can in most cases discard the hardware drivers of old setup on the fly, searching and installing new ones. However, of course all underlying issues will be carried over to new hardware.

    If redeployment is your chosen way to do this, I recommend Macrium ReDeploy, available in all paid versions of Macrium Reflect. Read more: Re-deploying Windows to new hardware using Macrium ReDeploy - KnowledgeBase - Macrium Reflect Knowledgebase

    Kari
      My Computer


  8. Posts : 80
    Windows 10
       #807

    pietro said:
    3 months, many many updates and builds... is there any chance to see this bug resolved?!? have i to try to correct it manually??!!!
    after few tests and research, the bug can be solved easier than expected.
    folders loose their flags so desktop.ini isn't readed. localizations and other things we need are in desktop.ini.
    execute these commands as administrator...

    attrib +h +r "D:\Users\Public\Desktop"
    attrib +r "D:\Users\Public\Documents"
    attrib +r "D:\Users\Public\Downloads"
    attrib +h +r "D:\Users\Public\Libraries"
    attrib +r "D:\Users\Public\Music"
    attrib +r "D:\Users\Public\Pictures"
    attrib +r "D:\Users\Public\Videos"

    localized names will be back, even in the english version. note: this patch corrects only \users\public folder and subfolders.
    i have other things missing localized texts.... waiting for a correction and trying to write a script to identify the folders that are missing the original flags...
    Last edited by pietro; 03 Nov 2016 at 20:48.
      My Computer


  9. Posts : 2
    Windows 10
       #808

    Hi Kari !
    First of all, thanks a lot for such a thorough tutorial

    After many hours and an all-nighter figuring out how to go around the many obstacles my own computer brought up ...

    (from Windows 8, hours to understand why and how to change my bios settings to allow my Windows 10 installation usb drive to boot, changing from GPT to MBR style on the SSD because it wouldn't have it any other way for the installation to proceed, finding a way to boot Macrium without going through with the "settings" step of the installation - for some reason, turning my laptop on and off trying to get F12 to work wasn't enought, I had first to reboot in Audit mode and press F12, and not the other way around ...? )

    ... I thought I was almost done when I finally got to the "unattended file" step, but unfortunately, this is where I got definitely stuck with a problem I haven't been able to solve on my own.

    As I read through the previous posts as much as I could, I managed to understand why I couldn't find the install.wim file, as I am using an updated and optimised / tweaked version of Windows 10 that only has the new install.esd

    My questions are :

    1. Why do we need to have the install.wim file, and not the esd version of it? Why does it have to be relocated? In other words, what is this 10th line for?

    2. I found a tutorial to convert my install.esd into a wim file. Will that do the trick, or will I have to get a regular Windows 10 iso and do it all over again? ( http://www.intowindows.com/how-to-ea...o-install-wim/ ).

    3.
    I only have two partitions :
    - one on C:/ that is my SSD on which I installed Windows and will put all the main programs until it's full.
    - one on E:/ which is my regular hard drive on which I intend to relocate the User folder.
    In the tutorial and the video, you are moving the install.wim file to a third partition. Does it mean I need to create another one, or is my E:/ intended for my User folder enough? If I do need a 3rd partition, what would be best (what kind of partition and where) ?
    In other words, where does this install.wim exactly "needs" to be, if ever.

    Looking forward to follow your precious advice ! :)

    PS: Sorry for the long explanation, I figured being thorough would be best.
      My Computer


  10. Posts : 3
    10 pro
       #809

    HELP, borked it...


    Hi,

    After getting over the initial ESD WIM thing, I went with Method 2, this was in Sept a few days before moving house.

    I ran into a problem with the .xml file, I then got over that but now I'm stuck. Repairing Windows from the CD doesn't succeed.

    Move Users Folder Location in Windows 10-photo-09-11-2016-18-08-52.jpg

    I have only today gotten around to powering this machine up since the move of house. I googled this error “Windows could not complete the installation” and an article mentioned changing p/w length to 0, and disabling two other options but as you can see below, they were already set that way.

    Move Users Folder Location in Windows 10-photo-09-11-2016-19-25-53.jpgMove Users Folder Location in Windows 10-photo-09-11-2016-19-27-04.jpg

    When I try to rerun sysprep today, it brings up this usage box suggesting I've not typed the right /switches ?

    Please point me in the right direction, and thanks for reading.
      My Computer


 

Tutorial Categories

Move Users Folder Location in Windows 10 Tutorial Index Network & Sharing Instalation and Upgrade Browsers and Email General Tips Gaming Customization Apps and Features Virtualization BSOD System Security User Accounts Hardware and Drivers Updates and Activation Backup and Restore Performance and Maintenance Mixed Reality Phone


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:21.
Find Us




Windows 10 Forums