Windows 10: Move Users Folder Location in Windows 10  

  1.    4 Weeks Ago #1180

    Kari said: View Post
    Are you doing Method One (clean install), or Method Two (relocating Users folder on an existing installation)?
    Neither, I'm the one that had my User folder installed on G: drive with fresh install of Win 10, due apps and certain games, that drive was getting low on space. So I wanted to buy a new Larger drive, and swap it out. You gave me the below instructions.

    Theoretically, it should work. I must admit I have never done that, I will test that scenario later this week.

    Thinking about it, about the fact that if you boot to Windows before the new drive has got letter G and the old G: is no longer present, Windows would fail to boot. You would get to sign-in screen but system could not proceed from there because G: where Users folder is located would be missing. On the other hand, if you boot with duplicate Users folders on two different partitions / disks, it might also cause issues.

    This is how I would do it. Lot's of steps but trust me, this only takes a few minutes plus time required to clone old disk:

    1.) Clone old disk to new HDD / SSD using your preferred imaging / cloning software.

    2.) Shutdown PC

    3.) Remove old disk (optional, see steps 7 & 8 below).

    4.) Create a WinPE USB boot device (tutorial, process is fast and easy).

    5.) Boot from WinPE USB, do not let Windows boot from hard disk!

    6.) WinPE boots automatically to Command Prompt. Run Windows Disk Partitioning tool by typing diskpartand pressing Enter.

    7.) Enter command list vol to get a list of all volumes. Check the list, find the drive letter for partition containing Users folder on old disk if you did not remove it in step 3. above, and drive letter for same partition on cloned new disk. Notice that when booting to WinPE, drive letters might be different than when booting normally, drive G: might be shown as drive F: or something else. In any case, whatever drive letters are shown, change them.

    8.) If the old disk was not removed in step 3, select it by entering command sel vol X where X is its volume number. Change its drive letter to any unused letter with command assign letter=Y where Y is the new drive letter.

    9.) Now select the cloned partition on new disk with command sel vol X where X is its volume number. Assign it the letter G with command assign letter=G

    10.) Type exit and press Enter to quit Diskpart.

    That's it. remove WinPE USB, reset / restart PC booting normally to Windows.
      My ComputerSystem Spec

  2.    4 Weeks Ago #1181

    Hello,


    I have a Ascer switch 10.
    Win 10 Home
    x64 processor
    32 bits operating system
    28Gb internal ssd hard drive, non removable.
    26Gb used (13,6Gb in users because of spotyfy)
    So I want to move users to a 64Gb ssd as drive D:

    Your youtube films and tutorial are quite good. Unfortunately I still have questions. Reading those 119 page is a lot. I didn't.

    Your films are different than the tutorial here on page 1.
    I read your tutorial and watched Sysprep - Relocate the Users folder in Windows 10 and Windows 10 - Relocate the Users folder Part 2 (the newest of the two)

    The line with <cpi: offlineImage cpi:source="Wim:E:\x86\source\install.wim#windows 10 Pro" xmlns:cpi"urn:schemas-microsoft-com:cpi"/> (I put a space between : and offline ) appears in both films but not in the tutorial here, page 1. Is it necessary?

    I read:
    Sysprep will not run on an upgraded OS. You can only run Sysprep on a custom (clean) install version of Windows.
    I found my system was upgraded from 8.1 to 10. Now version 1607. There is to less space to update.
    We need to edit Windows registry to "fool" Windows
    I did, but I think I fooled my self.... by editing the registry as told. I didn't read quite well or did not understand what is meant. I don't need to upgrade anymore.

    How to proceed?
    Putting back the backup and start over again without fooling windows?
    or do what in Sysprep - Relocate the Users folder in Windows 10 is showed
    Ore do this: Windows 10 - Relocate the Users folder Part 2

    The line <cpi: offlineImage cpi:source="Wim:E:\x86\source\install.wim#windows 10 Pro" xmlns:cpi"urn:schemas-microsoft-com:cpi"/> must it be used or not?

    I hope someone can help.
    Regards
    Kos
      My ComputerSystem Spec

  3.    3 Weeks Ago #1182

    Great Thread, Thanks Kari.
    i have set up my C:\User folders to G: drive, as per your instr, which all worked well. But now i need to do a fresh install of Windows for bsod reasons.
    if i do a fresh windows install, will i have to follow your instructions above, again? if so, will i lose all my current G:\User docs etc that i have already put in the G: drive?
    thanks.
      My ComputerSystem Spec


  4. Posts : 14,068
    Windows 10 Pro
    Thread Starter
       3 Weeks Ago #1183

    Funjunkie6 said: View Post
    if i do a fresh windows install, will i have to follow your instructions above, again? if so, will i lose all my current G:\User docs etc that i have already put in the G: drive?
    thanks.
    Yes, you have to start from scratch and repeat this process again. You will not lose your data but you cannot keep them on G: drive while reinstalling due permissions issues.

    Backup your personal folders (Documents, Pictures, Videos and so on) from G: drive to an external drive. Reinstall, relocate Users folder to G: as told in tutorial. When done, copy your data from backup to respective folders on "new" G: drive.

    Kari
      My ComputerSystem Spec

  5.    3 Weeks Ago #1184

    Thanks a lot for your quick reply.
      My ComputerSystem Spec


  6. Posts : 1
    Windows 10 Pro 64-Bit
       2 Weeks Ago #1185

    Like many before me, I thank you, Kari, for this helpful guide. :)

    There are some things I would suggest updating in your guide though so as to make things more streamlined:

    First, it might be clearer for those attempting this for the first time (like me) to have ALL the steps in "Method Two: Existing Windows Installation" and "Method Three: During Windows Upgrade" threshed completely out instead of referring to steps in other methods. I did Method Two, which refers to steps in Method One, but when I did so, I inadvertently continued through Method One's steps. Good thing those steps still resulted in a restart anyway, but I startled myself momentarily thinking I may have screwed things up.

    Also, as I read through this thread (not all 119 pages, but quite a few), more than one person who did Method Two experienced the same thing I did: When my PC restarted, it got stuck in the Windows 10 startup screen (blue Windows logo, dots going around in circles) for a good while. As others in this thread experienced something similar (just a plain blank screen for some) and reported that it continued eventually, I also waited (around 15 minutes for me), and it did indeed continue. Without mention of this in the Method Two steps though, I definitely though I might have screwed things up. Good thing I did read through the thread because if I didn't, I'd have restarted my PC after 5 minutes thinking I did something wrong. Therefore, you might want to mention this long wait in the original post so as not to panic people.

    By extension, your tutorial video shows you having a Windows 10 Installer plugged in while your text guide does not. Might want to clarify if this is needed (I started it without the installer as I followed only the text guide, though I did plug in my Windows 10 installer USB drive during the 15-minute restart wait thinking that's what it might be missing that's keeping it from restarting, but only after I watched your video while I was waiting).

    Lastly, while the operation was successful, my OneDrive bugged out. Not sure if other people experienced this but for those who do, this might help:

    While Windows 10 was already using the new User folder location for most things, my old C:\User\Username\OneDrive folder continued to exist containing all OneDrive files (the new D:\User\Username\OneDrive location only copied the drive folders, not files), with the added bug of my OneDrive system tray icon disappearing and OneDrive itself no longer functioning. After some fiddling, I was able to get it back running by deleting the old C:\User\Username\OneDrive (folder recommended you back it up first, of course), opening WIN+R and accessing %LOCALAPPDATA%\Microsoft\OneDrive\Update, and running the OneDriveSetup.exe. It sets up OneDrive like it's the first time you're setting it up, and it already chooses the new D:\Users\Username\OneDrive folder by default. After finishing the installation, it syncs completely in the new folder.

    Once more, thank you for this guide, Kari. :) You were a great help.
    Last edited by Overkill001; 2 Weeks Ago at 04:09.
      My ComputerSystem Spec


 

Tutorial Categories

Move Users Folder Location in Windows 10 Tutorial Index Network & Sharing Instalation and Upgrade Browsers and Email General Tips Gaming Customization Apps and Features Virtualization BSOD System Security User Accounts Hardware and Drivers Updates and Activation Backup and Restore Performance and Maintenance Xbox Windows Phone


Related Threads
I'm trying to move all of my documents to a new hard drive and I successfully did it with all of them except for the "Music" folder; each time I try to move it to a new location I get this error message: 67258 Is there a way to correct this?
I used the tutorial to move my user folders to a spare, second drive in my laptop. Now I'm thinking about changing it from a spinner to an SSD and I'm wondering what steps I should be considering, before I make that swap, to preserve my user folders...
Folks, I don't want to move my Users folder. (Kari has an excellent tutorial on that. I did it on a previous system and that's not a solution for me.) My C drive is an SSD and my downloads are at 120GB. Sure, I can move things manually, but...
Machine: Alienware M17x R5 Laptop OS: Windows 10 Pro (upgraded from Windows 7 Pro) What caused the problem: 1. I wanted to change the locations of the users directory from C:\ (SSD partition that contains the OS) to W:\ (HDD) 2. I...
Hi! I have a computer that is stuck in an "automatic repair" loop. On this machine, the Users folder is on a separate physical hard drive than the system drive. I have concluded that I will have to reset the PC. What is the best way to move...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:27.
Find Us