How to Upload and Post Screenshots and Files at Ten Forums  

Page 8 of 10 FirstFirst ... 678910 LastLast
  1. davidhk's Avatar
    Posts : 5,396
    windows 10 Home threshold2
       #70

    Jezza819 said:
    It's an image that I can't save to my computer or I would try that. So you really can't link an image from a URL?
    Pardon my ignorance. I fail to understand.
    Can you not use a screen capture software to snip the image at all ?
    I have yet to encounter a situation where I cannot snip an image or even an entire page from any website.
      My Computer

  2. Jezza819's Avatar
    Posts : 81
    Windows 10
       #71

    Brink said:
    Go ahead and post a link to where the image is at, and I'll test to see what the issue may be.

    Some sites do not allow their posted images to be linked via URL. Since you can't save the image to your computer, this may be the situation.
    I know it's possible because I've seen other post this same image. But when I try to insert it using the link and the insert image button. Nothing shows up.


    Speedtest.net by Ookla - My Result
      My Computer

  3. Brink's Avatar
    Posts : 48,806
    64-bit Windows 10 Pro for Workstations build 19635
    Thread Starter
       #72

    You may have just not entered the URL correctly. You have to use only the URL bit and not all of the html coding in the link they provide.

    Here's what I used below to show the image under it.

    [img]https://www.speedtest.net/desktop/29319811.png[/img]

      My Computers

  4. davidhk's Avatar
    Posts : 5,396
    windows 10 Home threshold2
       #73

    I snipped that link you posted > saved it to my computer > post it back here.

    screenshot captured...............

    How to Upload and Post Screenshots and Files at Ten Forums-my-speedtest-result.jpg
      My Computer

  5. Jezza819's Avatar
    Posts : 81
    Windows 10
       #74

    davidhk said:
    Pardon my ignorance. I fail to understand.
    Can you not use a screen capture software to snip the image at all ?
    I have yet to encounter a situation where I cannot snip an image or even an entire page from any website.
    It's a speed test result and if you right click on it like you usually would to save an image, it just starts the test over again.
      My Computer

  6. davidhk's Avatar
    Posts : 5,396
    windows 10 Home threshold2
       #75

    Jezza819 said:
    It's a speed test result and if you right click on it like you usually would to save an image, it just starts the test over again.
    What "right click" ? I was not suggesting Copy/Paste.
    Most likely I failed to make my suggestion clear.
    I was suggesting taking a screenshot of the image and saving it to the computer.
    Do you have a screen capture software installed ?
    If not, the built-in Snipping Tool will do the work although with limited functions.
    I am using a 3rd party screen-capture software called Picpick.
    See the result on post #73.
      My Computer

  7. Jezza819's Avatar
    Posts : 81
    Windows 10
       #76

    Brink said:
    You may have just not entered the URL correctly. You have to use only the URL bit and not all of the html coding in the link they provide.

    Here's what I used below to show the image under it.

    [img]https://www.speedtest.net/desktop/29319811.png[/img]


    Ok here it goes,

    This blank space is where I keep trying to insert it and nothing is happening.

    Now you said just to use the url bit and not all of the html stuff, what does that mean? Did you use the insert image button when you put yours in?
      My Computer


  8. Brink's Avatar
    Posts : 48,806
    64-bit Windows 10 Pro for Workstations build 19635
    Thread Starter
       #77

    If you use the "Insert Image" button, don't include the [img] bb code bit, and only use the URL inbetween it.
      My Computers

  9. Jezza819's Avatar
    Posts : 81
    Windows 10
       #78

    Brink said:
    If you use the "Insert Image" button, don't include the [img] bb code bit, and only use the URL inbetween it.
    Trying it again.

    Nope nothing happening.

    Did you use the insert image button?
      My Computer

  10. Jezza819's Avatar
    Posts : 81
    Windows 10
       #79

    davidhk said:
    What "right click" ? I was not suggesting Copy/Paste.
    Most likely I failed to make my suggestion clear.
    I was suggesting taking a screenshot of the image and saving it to the computer.
    Do you have a screen capture software installed ?
    If not, the built-in Snipping Tool will do the work although with limited functions.
    I am using a 3rd party screen-capture software called Picpick.
    See the result on post #73.
    You know, you see an image on a website, you put your cursor over it and "right click it", that brings up a menu where you can"save image as". That's how I've always saved images.

    I do have a screen capture tool for Chrome

    How to Upload and Post Screenshots and Files at Ten Forums-screencapture-beta-speedtest-net-1515369153424.png

    But I want to know how this poster did this straight from the speed test.

    Speed test recommendations?
      My Computer


 

Tutorial Categories

How to Upload and Post Screenshots and Files at Ten Forums Tutorial Index Network & Sharing Instalation and Upgrade Browsers and Email General Tips Gaming Customization Apps and Features Virtualization BSOD System Security User Accounts Hardware and Drivers Updates and Activation Backup and Restore Performance and Maintenance Mixed Reality Phone


Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:04.
Find Us




Windows 10 Forums