Run Hyper-V, VirtualBox and VMware on same Computer  

Page 2 of 2 FirstFirst 12

  1. Polda18
    Posts : 6
    Windows 10 Home 64bit
       New #10

    Hi. Very nice tutorial. But what can I do in this case?
    Code:
    Windows Boot Loader
-------------------
identifier              {current}
device                  partition=C:
path                    \WINDOWS\system32\winload.efi
description             Windows 10
locale                  cs-CZ
inherit                 {bootloadersettings}
recoverysequence        {1aad407e-3437-11ea-8bb8-b2dedd1adf79}
displaymessageoverride  Recovery
recoveryenabled         Yes
isolatedcontext         Yes
flightsigning           Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \WINDOWS
resumeobject            {1aad407b-3437-11ea-8bb8-b2dedd1adf79}
nx                      OptIn
bootmenupolicy          Standard
hypervisorlaunchtype    Off
    I have Hyper-V already disabled, yet neighter VirtualBox or VMware acknowledge that.

    - - - Updated - - -

    Code:
    PS C:\Users\Marek Poláček> bcdedit /set {current} hypervisorlaunchtype off
The set command specified is not valid.
Run "bcdedit /?" for command line assistance.
    What can I do in this case? I need to turn it off
    Code:
    Windows Boot Loader
-------------------
identifier              {current}
device                  partition=C:
path                    \WINDOWS\system32\winload.efi
description             Windows 10
locale                  cs-CZ
inherit                 {bootloadersettings}
recoverysequence        {1bb8a075-4075-11ea-8ee2-8093d137bcf7}
displaymessageoverride  Recovery
recoveryenabled         Yes
isolatedcontext         Yes
flightsigning           Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \WINDOWS
resumeobject            {1bb8a073-4075-11ea-8ee2-8093d137bcf7}
nx                      OptIn
bootmenupolicy          Standard
hypervisorlaunchtype    Auto
    Last edited by Polda18; 26 Jan 2020 at 15:47. Reason: Windows Update messed with settings
      My Computers
    Quote Quote

  3. Kari
    Posts : 17,661
    Windows 10 Pro
    Thread Starter
       New #11

    Polda18 said:
    Code:
    PS C:\Users\Marek Poláček> bcdedit /set {current} hypervisorlaunchtype off
The set command specified is not valid.
Run "bcdedit /?" for command line assistance.
    What can I do in this case? I need to turn it off
    Code:
    Windows Boot Loader
-------------------
identifier              {current}
device                  partition=C:
path                    \WINDOWS\system32\winload.efi
description             Windows 10
locale                  cs-CZ
inherit                 {bootloadersettings}
recoverysequence        {1bb8a075-4075-11ea-8ee2-8093d137bcf7}
displaymessageoverride  Recovery
recoveryenabled         Yes
isolatedcontext         Yes
flightsigning           Yes
allowedinmemorysettings 0x15000075
osdevice                partition=C:
systemroot              \WINDOWS
resumeobject            {1bb8a073-4075-11ea-8ee2-8093d137bcf7}
nx                      OptIn
bootmenupolicy          Standard
hypervisorlaunchtype    Auto
    Your code snippets clearly show a user error. You are running a command that requires an elevated Command Prompt from a normal, user level Command Prompt.

    Open Elevated Command Prompt in Windows 10

    Read the instructions, and try again.

    Kari
      My Computer
    Quote Quote

  4. Polda18
    Posts : 6
    Windows 10 Home 64bit
       New #12

    I agree it was a user error. However, the issue was different. I ran an elevated console, but instead of Command Line, it was PowerShell. As it turns out, this command doesn't work properly with PowerShell. Instead I set up a batch file for myself in order to make it little bit easier for me. I'll just launch up elevated cmd and type in my own constructed command that will run the actual necessary command for me. Thanks anyway :)

    This is the batch script:
    Code:
    :: HYPERVISOR CMD UTILITY
@echo off

REM CHECK ELEVATED PERMISSIONS
net session >nul 2>&1
if %errorLevel% == 0 (
    GOTO doit
) else (
    echo Run this command in an elevated command line please.
    GOTO end
)

:doit
if %1.==.   GOTO error
if %1==on   GOTO enable
if %1==off  GOTO disable

:error
echo Provide on/off in argument please.
GOTO end

:enable
bcdedit /set {current} hypervisorlaunchtype auto
GOTO reset

:disable
bcdedit /set {current} hypervisorlaunchtype off

:reset
echo This action requires a reset.

:end
      My Computers
    Quote Quote

  5. aswin
    Posts : 512
    Windows 11 Pro( x64) Ver. DEV.CHANNEL 22518.1012 RS_Prerelease
       New #13

    few years ago..i was running with two os win 10 and other i forget the name is that the one of the function of VMware and Virtual box ???
      My Computer
    Quote Quote

  7. Sauius
    Posts : 1
    Wimdows 10 Pro
       New #14

    Flat out didn't work for me. I tried all the suggestions, I was using a command prompt instead of powershell and evyerything.
    Edit: yes, I also tried uninstalling and installing virtualbox it still doesn't work
    Edit part 2: I finally got it working. As a tip to anyone who is reading this, when the fix doesn't work right away just re-install virtualbox and if you have guest additions installed, make sure to manually delete them from the programm folder, or else it will still not work.
    Last edited by Sauius; 05 May 2020 at 06:45.
      My Computer
    Quote Quote

  8. Myron
    Posts : 3
    Windows 10 Pro
       New #15

    Article requires updating. As of 20H2 (also 2004?), Hypervisor Platform feature installed and Virtual Box 6.1 , both will operate and there is no need to turn off the type 1 Hypervisor.
      My Computer
    Quote Quote

  9. zoolander
    Posts : 1
    20H2
       New #16

    Myron said:
    Article requires updating. As of 20H2 (also 2004?), Hypervisor Platform feature installed and Virtual Box 6.1 , both will operate and there is no need to turn off the type 1 Hypervisor.
    Not for me. The fix doesn't work either.
      My Computer
    Quote Quote

  10. William40
    Posts : 234
    Windows 10
       New #17

    I did method two and "hypervisorlaunchtype Auto" but I still can not install hyper-v from features, after restart I get message windows could not complete the operation, I restart into W10 with hyper-v. Also windows 10 become very slow even FireFox is hanging !!

    I have 3800x / 32 G RAM !!
      My Computer
    Quote Quote

  11. Myron
    Posts : 3
    Windows 10 Pro
       New #18

    .... and now I discover that since some recent update VirtualBox has stopped working for me too. It looks like the VM will start and then within a second I'm greeted with ....

    Code:
    Failed to open a session for the virtual machine MS-DOS 6.22 and Windows for Workgroups 3.11.

Failed to load R0 module C:\Program Files\Oracle\VirtualBox/VMMR0.r0: SUP_IOCTL_LDR_OPEN failed (VERR_LDR_GENERAL_FAILURE).

Failed to load VMMR0.r0 (VERR_LDR_GENERAL_FAILURE).

Result Code: E_FAIL (0x80004005)
Component: ConsoleWrap
Interface: IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
      My Computer
    Quote Quote

  13. masterwishx
    Posts : 1
    Win11
       New #19

    Hi, is this still actual in 2024?
    Win 11 Pro , can still use or Hyper-V or VirtualBox and VMware by hypervisorlaunchtype off/auto , still no way to use both in one ?
      My Computer
    Quote Quote

 

Tutorial Categories

Run Hyper-V, VirtualBox and VMware on same Computer Tutorial Index Network & Sharing Instalation and Upgrade Browsers and Email General Tips Gaming Customization Apps and Features Virtualization BSOD System Security User Accounts Hardware and Drivers Updates and Activation Backup and Restore Performance and Maintenance Mixed Reality Phone


  Related Discussions
Virtualbox and Hyper-V
in Virtualization

Allegedly, virtualbox 6 and hyper-v can now coexist i..e you can run VB6 if Hyper-V is enabled - not tried it.
Hello there, I'm trying to run a windows VM (tried 7 and 10) with 64-bit on virtualbox. But it stucks in the "starting windows" screen (very unsmoothly animations). The vm's specs are: 8GB RAM, 2 CPUs, 128MB VRAM (Max), 32GB VHD (should be...
Read more: https://techcommunity.microsoft.com/t5/Virtualization/VMware-Workstation-and-Hyper-V-Working-Together/ba-p/825831
Hyper V or VMWare?
in Virtualization

While not an expert, I am fairly familiar with VMWare. I know very little about Hyper V, but have watched Kari videos about it. I know VMWare is easier to set up and there are some features easier to use in VMWare. What I am asking is what are the...
Vmware or virtualbox?
in Virtualization

I have tested out vmware workstation and virtualbox and can't decide which is best, can you help me?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 12:19.
Find Us




Windows 10 Forums