Realtek sound re-mapping worked until spring update ?? Solved

  1.    #1

    Realtek sound re-mapping worked until spring update ??

    All worked until the update . Anyone else having issues re-mapping the Realtek sound . below worked before , but not now ..
    How to remap / retasking Realtek onboard jacks / ports
    If youíre using Realtek onboard soundcard and for whatever reasons wants to remap / retask the rear jacks or front panel jacks to anything you want hopefully youíll find this useful
    For example, in my case, because iím not using a computer case (in other words, i just left my motherboard open) and i donít have a standalone front panel and at the same time i want to connect my headphone to the rear grey jack / side speakers jack (by default headphone can be connected only to the front panel jack) while also connecting a 5.1 analog speakers setup to the rear jacks (green, black, and orange)
    Anyway to make thing short, hereís the steps:
    0. Download the latest driver available because there are differences between the pin numbers used if youíre using old drivers, uninstall the old driver, restart your system, install the new driver and then restart your system once again (at the time i write this, the latest version is R267, and so this post is based and tested using their R267 driver for the 64-bit systems)
    1. Make sure that youíve plugged everything that you need first into your Realtek Jacks (whether front panel jacks if you have it or rear jacks). For example, in my case, i already connected the headphone to the side speakers jack (grey colored jack)
    2. Open regedit by typing regedit at the run command (press Windows Key + R and then type regedit) and then locate the following registry key
    Where, XX should be the key for Realtek High Definition Audio (usually it is 0000 but if itís not the correct key for Realtek HD Audio then you should look for the correct key. You can tell whether the registry key is for Realtek HD Audio or not by looking at the DriverDesc which is located at the right panel) and Y are random numbers
    3. Create a new Binary registry key(s) using below Pin Numbers and Binary Values
    The Old Pin Numbers (just in case itís needed somehow)
    "Pin00" = Front speakers (rear green)
    "Pin01" = Rear speakers (rear black)
    "Pin02" = Center / Sub-woofer (rear orange)
    "Pin03" = Side speakers (rear gray)
    "Pin04" = Mic-in (rear pink)
    "Pin05" = Front Mic-In (front pink)
    "Pin06" = Line-in (rear blue)
    "Pin07" = Front Headphone (front green)
    The New Pin Numbers
    "Pin10" = Line-in (rear blue)
    "Pin11" = Mic-in (rear pink)
    "Pin14" = Front speakers (rear green)
    "Pin15" = Rear speakers (rear black)
    "Pin16" = Center / Sub-woofer (rear orange)
    "Pin17" = Side speakers (rear gray)
    "Pin19" = Front Mic-In (front pink)
    "Pin1b" = Front Headphone (front green)
    Binary Values
    "00 00 00 00" = Line-in
    "01 00 00 00" = Mic-in
    "02 00 00 00" = Headphones
    ď03 00 00 00″ = Front speakers 2nd Output
    "04 00 00 00" = Front speakers
    "05 00 00 00" = Rear speakers
    "06 00 00 00" = Center / sub-woofer
    "07 00 00 00" = Side speakers
    For example if you want to map the rear side speakers jack into a front
      My ComputerSystem Spec

  2.    #2

    figured it out after 3 hrs , the latest realtek drivers check if anything has changed since the original install , if yes , it resets the driver to original ( so I read ) ..... I found a driver , and all is good again ...
      My ComputerSystem Spec


Related Threads
Realtek sound problem in Sound & Audio
Hi guys, can someone help me find if there is a realtek driver for win10 that supports DTS neo. I was forced to go back to win7 for that matter. Once i used one driver that worked with win 10 but i lost it and can't find compatible now:)
2 out of my 3 computers were upgraded no issue. My last one is a 2008 with an Asus P5N-MX with a E8400 processor. As stated in the title, I was able to complete the upgrade but I have a black screen if I leave a video cards. I swapped many...
Uhm. Well, that's pretty much what the title says. To get into detail; while I was using a music synthesis program, there was no sound. Even the system and browser sounds were not there. I did check to see a "Realtek HD Audio" not being...
Did anyone else get this latest update from Microsoft Realtek Semiconductor Corp. driver update for Realtek High Definition Audio 07/10/2015 Must say since it downloaded my sounds are better more crisp on my laptop
RealTek HD sound problem in Drivers and Hardware
Hello, I've been installing the latest drivers from realtek audio, both from Reaktek website and automatic updates. Whenever I install it the sound is bugged. I hear trash noise and the volume is super low. I have to revert back to the windows 10...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:57.
Find Us