Windows 10: NET Framework 3.5 problems installing

Page 1 of 2 12 LastLast
  1.    20 Mar 2016 #1

    NET Framework 3.5 problems installing


    Hello,

    I know this has been asked many times but I have been unsuccessful trying all that has been suggested before. When I attempt to install it through turn Windows features on or off it begins to download but then I get an error code 0x80070002.
    I have tried running DISM with DISM /Online /Enable-Feature /FeatureName:NetFx3 /Source:f:\sources\sxs /All /LimitAccess only to get error 0x800f081f.
    I have run sfc /scannow and Dism /Online /Cleanup-Image /RestoreHealth, both of which say nothing is wrong.
    I am using the image I made on a flash drive, and going into sources\sxs the 70,635 KB cabinet file is there.

    Is there anything else that I could be doing to resolve this and install it?
      My System SpecsSystem Spec

  2. f14tomcat's Avatar
    Posts : 19,580
    Triple Boot 10 Pro & 10 Insider Pro & 8.1 Pro
       25 May 2016 #2

    jdk said: View Post
    Hello,

    I know this has been asked many times but I have been unsuccessful trying all that has been suggested before. When I attempt to install it through turn Windows features on or off it begins to download but then I get an error code 0x80070002.
    I have tried running DISM with DISM /Online /Enable-Feature /FeatureName:NetFx3 /Source:f:\sources\sxs /All /LimitAccess only to get error 0x800f081f.
    I have run sfc /scannow and Dism /Online /Cleanup-Image /RestoreHealth, both of which say nothing is wrong.
    I am using the image I made on a flash drive, and going into sources\sxs the 70,635 KB cabinet file is there.

    Is there anything else that I could be doing to resolve this and install it?
    Are you certain that the drive letter is correct? The one assigned when you mounted the image/flash?
      My System SpecsSystem Spec

  3. Slartybart's Avatar
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       26 May 2016 #3

    jdk said: View Post
    ...
    I know this has been asked many times but I have been unsuccessful trying all that has been suggested before. When I attempt to install it through turn Windows features on or off it begins to download but then I get an error code 0x80070002....
    Try these one at a time, then see if .NET installs. If one helps, you don't have to do the rest.

    1. Run the built-in Windows Update Troubleshooter in Control panel
      Press advanced, run as administrator

    2. Run the Windows Update diagnostic tool
      http://download.microsoft.com/downlo...nostic.diagcab

    3. Reset Windows Update

    4. Manual repair Windows Update and compnonent services
      1. Stop the Windows Update service
        Open Services
        sort by the names column (reverse order - might take two clicks on the column heading)
        Right click Windows Update service, select Stop

      2. Clean up the temp Windows Update files in the SoftwareDistribution folder
        Navigate to C:\Windows\SoftwareDistribution\DataStore
        Delete all files and folders in the DataStore folder
        Note: Windows Update history also gets reset. To see Windows Updates, look in Installed Updates.

        Navigate to C:\Windows\SoftwareDistribution\Download
        Delete all files in the Download folder

      3. Start the Windows Update service
        Open Services
        sort by the names column (reverse order - might take two clicks on the column heading)
        Right click Windows Update service, select Start

      4. DISM - Repair Windows 10 Image
        Option One: To Run "DISM /Cleanup-Image" Tool in Command Prompt
        Step 6. To Use DISM /RestoreHealth /Source:wim Command
        OR
        Step 7. To Use DISM /RestoreHealth /Source:esd Command
      My System SpecsSystem Spec

  4. Cliff S's Avatar
    Posts : 13,860
    Microsoft Windows 10 Pro 64-bit 14393, Windows 10 Insider Fast Ring, Windows 8.1 Update, Ubuntu
       26 May 2016 #4

    Compare:
    What you used:
    DISM /Online /Enable-Feature /FeatureName:NetFx3 /Source:f:\sources\sxs /All /LimitAccess

    What I used:
    DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:I:\sources\sxs


    Where the /Source:I:\ is the mounted USB drive, with the Windows 10 ISO I made using Media Creation tool.

    Note   Note
    The above that I used was a single version(Home) ISO.
      My System SpecsSystem Spec

  5.    27 May 2016 #5

    f14tomcat said: View Post
    Are you certain that the drive letter is correct? The one assigned when you mounted the image/flash?
    Yes, the drive letter is correct.
      My System SpecsSystem Spec

  6.    27 May 2016 #6

    Slartybart said: View Post
    Try these one at a time, then see if .NET installs. If one helps, you don't have to do the rest.

    1. Run the built-in Windows Update Troubleshooter in Control panel
      Press advanced, run as administrator
    2. Run the Windows Update diagnostic tool
      http://download.microsoft.com/downlo...nostic.diagcab
    3. Reset Windows Update
    4. Manual repair Windows Update and compnonent services
      1. Stop the Windows Update service
        Open Services
        sort by the names column (reverse order - might take two clicks on the column heading)
        Right click Windows Update service, select Stop
      2. Clean up the temp Windows Update files in the SoftwareDistribution folder
        Navigate to C:\Windows\SoftwareDistribution\DataStore
        Delete all files and folders in the DataStore folder
        Note: Windows Update history also gets reset. To see Windows Updates, look in Installed Updates.

        Navigate to C:\Windows\SoftwareDistribution\Download
        Delete all files in the Download folder
      3. Start the Windows Update service
        Open Services
        sort by the names column (reverse order - might take two clicks on the column heading)
        Right click Windows Update service, select Start
      4. DISM - Repair Windows 10 Image
        Option One: To Run "DISM /Cleanup-Image" Tool in Command Prompt
        Step 6. To Use DISM /RestoreHealth /Source:wim Command
        OR
        Step 7. To Use DISM /RestoreHealth /Source:esd Command

    Thank you for your help. Unfortunately I was unable to get any of these to work.
      My System SpecsSystem Spec

  7.    27 May 2016 #7

    Cliff S said: View Post
    Compare:
    What you used:
    DISM /Online /Enable-Feature /FeatureName:NetFx3 /Source:f:\sources\sxs /All /LimitAccess

    What I used:
    DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:I:\sources\sxs


    Where the /Source:I:\ is the mounted USB drive, with the Windows 10 ISO I made using Media Creation tool.

    Note   Note
    The above that I used was a single version(Home) ISO.
    Thanks, unfortunately this did not help either.
      My System SpecsSystem Spec

  8. Kyhi's Avatar
    Posts : 1,775
    Windows 3.1 to Windows 10
       27 May 2016 #8

    try this

    REBOOT first

    and do not use control panel - add features - as it always downloads from windows uodate

    Dism /online /Disable-Feature /FeatureName:NetFx3 /Remove

    then try to enable it again (change drive letter E to match the mounted ISO drive letter

    Dism /online /enable-feature /featurename:NetFx3 /Source:E:\sources\sxs /all /LimitAccess
      My System SpecsSystem Spec

  9.    27 May 2016 #9

    Kyhi said: View Post
    try this

    REBOOT first

    and do not use control panel - add features - as it always downloads from windows uodate

    Dism /online /Disable-Feature /FeatureName:NetFx3 /Remove

    then try to enable it again (change drive letter E to match the mounted ISO drive letter

    Dism /online /enable-feature /featurename:NetFx3 /Source:E:\sources\sxs /all /LimitAccess
    After trying this I get "Error: 2 System cannot find the file specified."
      My System SpecsSystem Spec

  10. f14tomcat's Avatar
    Posts : 19,580
    Triple Boot 10 Pro & 10 Insider Pro & 8.1 Pro
       28 May 2016 #10

    @jdk... the ISO from Media Creation Tool is ESD format. The ISO from Tech Bench is WIM format. I've never had much luck using the ESD format to do any DISM work, but never an issue with WIM. I used it to add .net 3.5 on Insider 14342 & 14352. Same DISM command listed above. Might want to try, can't hurt.
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
I have problems since installing win 10.... in Performance & Maintenance
Ever since I installed 10, I have major issues with scrolling through selection menus and drop down menus pop up when clicked on but immediately disappear. Also on start up, the page that is supposed to roll up to access your login screen won't roll...
Hello there, After splashing out 100 on Win 10 and doing 3 (yes, that's right...3) clean installs, low and behold nothing much works. I had previously downgraded from a FREE win 10 installation 2 days ago only to find it messed up win 7 and I...
Problems right after installing Windows 10 in Performance & Maintenance
Hello everyone, The moment I installed windows 10 from windows 8.1 I noticed a lot of problems. The boot time took 3.5 times longer the very first time booting the computer with 10. Even after disabling/enabling 'fast boot'. 20% of the time...
I currently have windows 7 Enterprise SP1 (32-bit) on my laptop and I intend to upgrade to Windows 10. How to do that ? As far as I know, there is no windows 10 update for windows 7 enterprise ! Please help. Do I need to install windows 7...
Problems Installing Updates in Windows Updates and Activation
For some reason, I'm getting an announcement that my updates didn't install. 12520 Is anyone else getting this problem?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:59.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums