Windows 10: Windows 10 Recovery Tools - Bootable Rescue Disk

  1.    26 Nov 2017 #1171

    Kyhi said: View Post
    SFC Scannow and Dism RestoreHealth - Image Health - Repair Corrupt Files
    Here is a program to help users with corrupt windows files..
    This program will run System File Checker and DISM commands to repair an online Windows image
    and will also look for the setup media to use as a repair source

    Step 1: Download and Extract > IMAGE_HEALTH to a root folder ( C:\image_health )
    Step 2: Right-Click IMAGE_HEALTH.CMD > Select Properties > Select Unblock
    Step 3: Insert your Windows Setup Media ( Mounted ISO or DVD or USB )
    Step 4: Right Click on IMAGE_HEALTH.CMD and Run as Administrator

    To Download Official Windows Setup Media > Use Option #16
    This Program supports any Windows 8/8.1/10 Setup Media with an Install.wim or an Install.esd

    Attachment 88640
    <snip>
    @Kyhi

    /********
    * Edited Original post edited as I overlooked instruction to use Option 16 to download compatible source media. Some of my original problems may have due to incompatible media
    * Edited post used Option 16 to download iso for Windows 10 Pro x64 Creators Update
    * I believe my system specs match this download
    *
    *Edit 2: See subsequent post. I think repair problem isolated to .NET Framework 4. But still a question on selecting Unblock
    /*******


    1. I followed instructions: downloaded the tool, extracted to root folder C:\ImageHealth
    2. I right click ImageHealth.cmd->Properties but don't see Unblock under General or any other tab????



    • I ran Option 1. It said "Component store repairable"
    • Ran Option 2: It said "Source files could not be found". On to Option 3



    • But first used Option 16 to download ISO that matches my system specs. I mounted the iso which i see apears a
    • I use Option 3: Pressed 1 to Mount Windows Image as the Repair Source

    Code:
    ===============================================================================
    
    
      Press 0 - Use Source:Wim:Install.wim as Repair Method ( source:wim: )
      Press 1 - Mount the Windows Image as the Repair Source ( Recommended )
    ===============================================================================
    > Enter Your Option: 1
    
    
    ===============================================================================
       Mounting the Source Install.wim as the Repair Source
       Please Wait.. This will take 5-10 minutes..
    ===============================================================================
    A subdirectory or file F:\Users\xxxxx\Desktop\Image-Health\Source\Mount already exists.
            1 file(s) copied.
    
    
    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0
    
    
    Mounting image
    [==========================100.0%==========================]
    The operation completed successfully.
    
    
    ===============================================================================
       Dism is restoring the online image health using the mounted source media.
       Please Wait.. This will take 10-15 minutes or more..
    ===============================================================================
    
    
    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0
    
    
    Image Version: 10.0.15063.0
    
    
    [===========================86.1%=================         ]
    Error: 0x800f081f
    
    
    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.
    
    
    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
    
    
    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0
    
    
    Unmounting image
    [==========================100.0%==========================]
    The operation completed successfully.
    Press any key to continue . . .

    In summary:
    1. I didn't see Unblock for ImageHealthcmd Properties so couldn't select it
    2. Don't know why it's failing after using Option 16 to download then mount the compatible ISO file


    Any help in repairing my online image and understanding what is going on would be greatly appreciated. TIA
    Last edited by ComputerGeek; 27 Nov 2017 at 12:09. Reason: Used wrong source media
      My ComputerSystem Spec

  2.    27 Nov 2017 #1172

    Update:

    I ran sfc and looked at the CBS.log. Looks like I'm lucky. Only one repair problem appears related to .Net Framework 4
    Code:
    2017-11-26 20:43:53, Info                  CSI    00003991 [SR] Beginning Verify and Repair transaction
    2017-11-26 20:43:53, Info                  CSI    00003993 [SR] Cannot repair member file [l:16]'ServiceModel.mof' of NetFx4-ServiceModel_mof_files, version 4.0.14917.133, arch amd64, versionScope neutral, pkt {l:8 b:b03f5f7f11d50a3a} in the store, hash mismatch
    Will try and tackle that later....

    But still one question re: selecting Unblock? Didn't see that in Properties
      My ComputerSystem Spec


  3. Posts : 2,004
    Windows 3.1 to Windows 10
    Thread Starter
       03 Dec 2017 #1173

    When you Download files from the Internet, sometime they are blocked from running by your PC, thus you have to UNBLOCK the program to allow it to run... Thus in your case - it was not applicable.

    The hash mis-match is a MS issue and should be resolved by MS in a future update..
      My ComputerSystem Spec

  4.    05 Dec 2017 #1174

    Kyhi said: View Post
    The hash mis-match is a MS issue and should be resolved by MS in a future update..
    Thanks for the help and the insight re: hash mismatch. Saved me much time looking for a solution!
      My ComputerSystem Spec

  5.    06 Dec 2017 #1175

    Redbatman said: View Post
    Is this as good as Macrium?
    To be honest , i doubt it , it is not as good as the Macrium
      My ComputerSystem Spec

  6.    09 Dec 2017 #1176

    Ammsdwer said: View Post
    To be honest , i doubt it , it is not as good as the Macrium
    This tool is completely different to Macrium Reflect. This is a repair tool, Macrium is an imaging tool.
      My ComputerSystem Spec

  7.    22 Dec 2017 #1177

    Hello all, I'm new ..and very frustrated... I built a PC for my brother for Christmas. I"m a field tech, but not as able with software as I am hardware. I was in such a rush to get all the pieces together that when the last part (SSD) came I literally took it out fo the box and installed Windows 10 on it (build 1709) Since the machine I was rebuilding (Lenovo Think Centre M78 SFF) was fairly new (UEFI able BIOS) and Win10 was the latest version I thought nothing of a straight install.. Yeah, anyway it partitioned everything in a MBR setup and just when I was gonna rebuild the OS installation (wipe all partitions and convert) I found out about the mbr2gpt tool that MS just came out with. Well it's available from build 1703 forward, so I gave it a shot even though it's recommended to be used in WINPE environment. It fails in when I use in in Windows and later the tool would "break" -would tell me that "mbr2gpt has stopped". So I spend the rest of the day yesterday trying to build WinPE bootable media -to no avail. When I found Kyhi's download, I kissed the heavens, however when I try to use mbr2gpt in his rescue WinPE it doesn't recognize the tool and tells that.

    All that said I'm feeling really stupid right now and in too much of a Christmas rush to think allot. I haven't used PE since the Vista days so it's possible I'm doing something wrong. For the record I'm following a fairly reliable write-up though.

    I'm not too proud to beg, so somebody please take pity on my wretched soul and help me ASAP to get WinPE to recognize the mbr2gpt tool so I can finish this project and move on to the rest of the presents.

    The best I can figure is that Kyhi's rescue WinPE iso is either created before build 1703 or I'm not properly asking for the tool in the WinPE command prompt.
      My ComputerSystem Spec

  •    22 Dec 2017 #1178

    Hi again, so in my rush to get help I passed by the fact that this post has been dead for 500+ days (first mistake) and then failed to recognize the Kyhi's rescue PE had a partition program on it that did the conversion for me (mistake 2)(took less than 30 seconds) *shakes head* I'm happy.. it's just a bit of let-down after all my combing the web for answers on how to build a WinPE so I could use this just-invented-magical-tool of Microsoft's. It would have been nice to use it with success.

    The good of it is, the job is done and I now will look for the time I need to figure out how to build custom WinPE loads for any future needs. Thank you Kyhi, you really saved my frustrated butt. I tip my hat to thee sir. Merry Christmas .
      My ComputerSystem Spec


  • Posts : 6,966
    10 Home x64 (1803) (10 Pro on 2nd pc)
       22 Dec 2017 #1179

    AlwaysDaStudent said: View Post
    ...in my rush to get help I passed by the fact that this post has been dead for 500+ days....
    Not dead @AlwaysDaStudent, it's continually being updated. You also missed the "Last edited by Kyhi; 20 Jul 2017..." at the bottom of post #1
      My ComputersSystem Spec

  •    22 Dec 2017 #1180

    umm yeah, Merry Christmas
      My ComputerSystem Spec


  •  

    Related Threads
    Hey Guys Does anyone know how this software can be configured to boot from usb on uefi/gpt. I formatted usb using rufus on the relevant mode then dragged over the contents of another usb where it does work on bios/mbr set up. But when booting...
    Create Rescue Disk fails during disk creation in Performance & Maintenance
    Have a new Double Power 8.1 Tablet that I've upgraded to Win 10. Now I've got it set up just right, I'm attempting to create a Rescue Disk. Purchased a 16gb micro-usb drive which is successfully recognized. Ran 'Create Rescue Disk' from Windows...
    Solved Win 10 Rescue disk in Installation and Upgrade
    I have a new laptop with win 7 pro installed. Once Win 10 is installed in July how will I be able to create a system restore disk?
    Just sharing this. I made another boo-boo today and deleted 500GB worth of media files (just movies and music). Don't ask me how because that's something nobody wants to do. :) I don't keep a backup of these files. For me these are disposable...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 18:04.
    Find Us