Page 1 of 2 12 LastLast

  1. Joined : Aug 2015
    Posts : 1
    Windows 10
       03 Aug 2015 #1

    InfraRecorder not working in Windows 10


    Has anyone been able to get Infrarecorder to actually work on the screen? It stays in memory, shown in Task Manger, tried both the 32 bit version and 64 bit version, but absolutely will not keep a window open to use the program. Have tried running as admin, tried compatibility mode as well.

    Hoping someone has seen the same and found a fix.
    Last edited by dnelms; 04 Aug 2015 at 12:10.
      My System SpecsSystem Spec


  2. Joined : Aug 2015
    Posts : 1
    Windows 10 Professional
       29 Aug 2015 #2

    [Solved for me]


    Hi! Try to download and run portable edition. It worked for me.
      My System SpecsSystem Spec


  3. Joined : Sep 2015
    Posts : 1
    Win 10
       01 Sep 2015 #3

    I installed InfraRecorder (64bit) on Win10 with the installer, and the first time I started it, it worked well and I was able to burn a CD. After that and after I closed InfraRecorder, I wasn't able to start it up again. Same thing happend as dnemls described, process was visible in the task manager but no windows was shown.

    So I tried the portable version as viale73 suggested and the same thing happened. The first time I started InfraRecorder it worked well and again I was able to burn a CD. But afterwards InfraRecorder wouldn't start up a second time.

    I found a workaround though: After the first run, there is a filled called "settings.xml" in the InfraRecorder portable folder. Deleting that file allowed me to start InfraRecorder again. The same helped for the version of InfraRecorder installed with the installer, only difference is that the settings.xml file is located in C:\Users\<Username>\AppData\Roaming\InfraRecorder.

    So there seems to be some kind of problem with the settings....
      My System SpecsSystem Spec


  4. Joined : Aug 2014
    Forever West
    Posts : 2,597
    Win10 Home and Pro, Win10 Insider Preview, Win7 Home, Linux Mint
       01 Sep 2015 #4

    Other programs sometimes give the same issue, most frequently for me used to be Firefox but haven't seen it so much in the last 3 or 4 versions. It would not be visibly open but using Task Manager showed it in memory so I would End Task then I could open it normally. And there could be any number of programs that don't release from memory.
      My System SpecsSystem Spec


  5. Joined : Sep 2015
    Posts : 1
    Windows 10
       07 Sep 2015 #5

    tmp10 said: View Post
    I found a workaround though: After the first run, there is a filled called "settings.xml" in the InfraRecorder portable folder. Deleting that file allowed me to start InfraRecorder again. The same helped for the version of InfraRecorder installed with the installer, only difference is that the settings.xml file is located in C:\Users\<Username>\AppData\Roaming\InfraRecorder.

    So there seems to be some kind of problem with the settings....
    Registered to say thanks - this worked for me!
      My System SpecsSystem Spec


  6. Joined : Dec 2015
    Posts : 1
    Windows 10
       12 Dec 2015 #6

    tmp10 said: View Post
    I found a workaround though: After the first run, there is a filled called "settings.xml" in the InfraRecorder portable folder. Deleting that file allowed me to start InfraRecorder again. The same helped for the version of InfraRecorder installed with the installer, only difference is that the settings.xml file is located in C:\Users\<Username>\AppData\Roaming\InfraRecorder.
    I thank you greatly, as expected it worked for me as well. I am returning the favor. Instead of deleting the 'settings.xml' file, edit it!
    I played around and found a workaround that seems to work every time. You can tweak it all you like, but it seems to work as is.

    <?xml version="1.0" encoding="utf-16" standalone="yes"?>
    <InfraRecorder>
    <Settings>
    <Language>
    </Language>
    <Global>
    <AutoRunCheck>0</AutoRunCheck> <--- Change this value from '1' to '0'
    <Log>1</Log>
    <RememberShell>0</RememberShell> <--- Change this value from '1' to '0'
    <CopyWarning>0</CopyWarning> <--- Change this value from '1' to '0'
    <RawImageInfo>1</RawImageInfo>
    <CharSetWarning>0</CharSetWarning> <--- Change this value from '1' to '0'
    <WriteSpeedWarning>0</WriteSpeedWarning> <--- Change this value from '1' to '0'
    <CodecWarning>0</CodecWarning> <--- Change this value from '1' to '0' (Might not have to change this)
    <FixateWarning>0</FixateWarning> <--- Change this value from '1' to '0'
    <NoDevWarning>0</NoDevWarning> <--- Change this value from '1' to '0'
    <Smoke>0</Smoke> <--- Change this value from '1' to '0'
    <Wizard>0</Wizard> <--- Change this value from '1' to '0'


    There are more settings after this, but I didn't bother changing them.
      My System SpecsSystem Spec


  7. Joined : Dec 2015
    Posts : 1
    Windows 10 Ver 1511
       25 Dec 2015 #7

    I've just had the same problem and the solution above worked. I took a copy of settings.xml as the settings seem to be changed after every execution of the program. I am, however getting a warning message: "Unable to load the configuration file, it may be corrupt. The XML processor returned: 2.". When I click OK to this, InfraRecorder starts & works OK.
      My System SpecsSystem Spec


  8. Joined : Feb 2016
    Posts : 1
    Win 10
       02 Feb 2016 #8

    SheriffGlenn, thank you for your solution, but it donīt work for me.So I set the changes above back to the originals and look at the following. There is one line that takes my interrest:"ShellDir"D:\Meine_Ordner\Music"/ShellDir"Itīs the default or last used folder. If I delet the data and save the changes, the Program starts normal. After burning a CD and close Infrarecorder, it was updated and it wonīt work anymore... Finaly I delet it, open the Program and try some default folder settings. Using the desktop as default works every time!
    Last edited by Der Ich; 02 Feb 2016 at 15:29. Reason: canīt save the text in correct form... Sorry
      My System SpecsSystem Spec


  9. Joined : Feb 2016
    Posts : 6
    Windows 10
       09 May 2016 #9

    Here is what seems to be working for me. I'm running Window 10 Pro (x64).
    I'm using Infrarecorder 0.53 x64.
    I changed only one line in the C:\Users\MyUser\AppData\Roaming\Infrarecorder\Settings.xml file:

    <RememberShell>1</RememberShell> (I changed the '1' to '0', that's a zero)
    <RememberShell>0</RememberShell>

    Now the GUI comes up every time.
      My System SpecsSystem Spec


  10. Joined : Aug 2016
    Posts : 1
    windows 10
       25 Aug 2016 #10

    The problem is by far more simple


    PhotoMeister said: View Post
    Here is what seems to be working for me. I'm running Window 10 Pro (x64).
    I'm using Infrarecorder 0.53 x64.
    I changed only one line in the C:\Users\MyUser\AppData\Roaming\Infrarecorder\Settings.xml file:

    <RememberShell>1</RememberShell> (I changed the '1' to '0', that's a zero)
    <RememberShell>0</RememberShell>

    Now the GUI comes up every time.
    It is true that the problem lies in the setting.xml file, which is stored ay every program use. Suppressing this file is equivalent as using the program in its native form. But in fact, this file stores YOUR'S settings. So, YOU defined explicitly or implicitly a wrong parameter. I spent some time to find what to do, which is as follows :
    1) suppress settings.xml in order to wortk with a native version of infrarecorder.
    2) open infrarecorder.
    3)open 'options\configuration
    4) disable the option 'Remember the last active folder'
    And the problem is solved.
    This procedure has to be done on every account on yout computer.
    I tested on 5 computers, it always worked.
    Sincerely yours,
    JEF


    1)
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Windows 10 Lock Screen Background Doesn't Show Up (stays theme color)
Just installed Windows 10 on my primary laptop and the lock screen is a solid blue (if I change my theme color, the lock screen changes too). However, I have Windows Spotlight turned on. I've tried setting a static picture or slideshow as the...
Customization
Memory constantly at 90%+ after Windows 10 upgrade
Yesterday I upgraded my PC from Windows 7 to windows 10, and today I started having problems running games where everything was getting very hitchy. I checked my memory and CPU usage and noticed that my memory is now constantly at 90% or greater....
Performance & Maintenance
Low Memory Warning - Virtual Memory Settings?
As soon as I fired up Sony Vegas 13 and started to record (setting up the microphone was a whole other issue), I was presented with a Low Memory Warning (in Sony Vegas). Personally I think I should have adjusted the Virtual Memory ages ago (Win7),...
Drivers and Hardware
Screen stays on when entered sleep on tablet.
I have the acer iocnia w510 (spec), upgraded from 8.1 to win 10 10240. That seemed to go fine, but when now entering sleep mode the screen darkens, but the backlight is still on. Any idea why this happens?
Installation and Setup
Hacking Team stealthy spyware rootkit stays entrenched
And the news just keeps getting better & better......:sarc: Hacking Team stealthy spyware rootkit stays entrenched through hard disk removal | ZDNet
AntiVirus, Firewalls and System Security
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd

All times are GMT -5. The time now is 04:09.
Find Us
Twitter Facebook Google+



Windows 10 Forums