Win10XPE - Build Your Own Rescue Media


  1. D18x
    Posts : 28
    Windows 10 Pro v18363
       New #2311

    Hello All!
    I need to build a Custom WinPE based on teh version 1511 of Windows 10.
    I tried it this tool, but it's not possible. Maybe there's an old version where i can accomplish this? Someone?

    PS: I've tried the SE version as well and it fails.
    Last edited by D18x; 01 Feb 2021 at 16:45. Reason: Update
      My Computer

  3. Kyhi
    Posts : 4,142
    Windows 3.1 to Windows 11
    Thread Starter
       New #2312

    Win10XPE Supports Windows 10 x64 or x86 ISO Sources:
    Fall Creators (1709)
    Spring Creators (1803) - Oct 2018 (1809)
    May 2019 (1903) - Nov 2019 (1909)
    May 2020 (2004) - Oct 2020 (2009)
      My Computer

  4. D18x
    Posts : 28
    Windows 10 Pro v18363
       New #2313

    Kyhi said:
    Win10XPE Supports Windows 10 x64 or x86 ISO Sources:
    Fall Creators (1709)
    Spring Creators (1803) - Oct 2018 (1809)
    May 2019 (1903) - Nov 2019 (1909)
    May 2020 (2004) - Oct 2020 (2009)

    I know, that's why i've tried WinPESE. Did not work.
    I even tried Win8.1PE, but the tool is telling me that my source folder does not have a Windows8.1 Image.... Altough it has...

    Can someone Help?
      My Computer

  6. Kyhi
    Posts : 4,142
    Windows 3.1 to Windows 11
    Thread Starter
       New #2314

    Why don't you try using a supported windows 10 version with Win10XPE ???
    TechBench by WZT (v4.1.1)
    What are you trying to do that requires that certain version of windows 10 ??
      My Computer

  7. D18x
    Posts : 28
    Windows 10 Pro v18363
       New #2315

    Kyhi said:
    Why don't you try using a supported windows 10 version with Win10XPE ???
    TechBench by WZT (v4.1.1)
    What are you trying to do that requires that certain version of windows 10 ??
    I am Trying to flash the disk Firmware, in several computers. But the tools hangs on my WinPE's... if i Use a Chinease one (Dabaicai WINPE), it will work. This WINPE uses the Win10.0.10586 version.... i was trying to test if it's related with teh Windows version...
      My Computer

  8. Kyhi
    Posts : 4,142
    Windows 3.1 to Windows 11
    Thread Starter
       New #2316

    I would think that a required file is missing for your flash application
      My Computer

  9. D18x
    Posts : 28
    Windows 10 Pro v18363
       New #2317

    Kyhi said:
    I would think that a required file is missing for your flash application
    I don't thing so, since it works on the Chinease WinPE. Maybe the app has some dependencies, like C++ or DirectX and so on...

    Either way, i try to build the PE with the Win10PE SE version, and i tried multiple Windows 10 versions.... i am always getting the same error on the logs: "Failed to Copy bcdedit.exe".
    Any suggestion?
      My Computer

  10. APT38
    Posts : 417
    W10, W7
       New #2318

    D18x said:
    Either way, i try to build the PE with the Win10PE SE version, and i tried multiple Windows 10 versions.... i am always getting the same error on the logs: "Failed to Copy bcdedit.exe".
    Any suggestion?
    In most projects that error will be down to either your A/V blocking/deleting the GWT program, or the project hasn't been updated to use the latest GetWaikTools 20.0.10 which was updated by it's author JFX to overcome the changes on the MS servers.
    In any case, to get support for older Projects like Win10PE SE you will need to ask at the Oven.org site, this thread is for Win10XPE project only
      My Computer

  12. Kyhi
    Posts : 4,142
    Windows 3.1 to Windows 11
    Thread Starter
       New #2319

    I don't think so, since it works on the Chinese WinPE. Maybe the app has some dependencies, like C++ or DirectX and so on...
    All of which are available in the Win10XPE Project
      My Computer

  13. richaardvark
    Posts : 19
    Windows 10 Pro Education Insider Preview Build 17046.rs_prerelease.171118-1403 (whatever that means)
       New #2320

    I would LOVE to use this amazing resource, except that I cannot boot into Windows to run the .exe to create the bootable ISO. I really wish there was just a general ISO available for download
      My Computer

 

  Related Discussions
Booting from Rescue media
in Backup and Restore

Hello All, -I use HP Compaq 8300 SFF as a second machine W 10 x64 Version 10.0.19041 Build 19041 running in Legacy BIOS mode, the EUFI is missing. Checking the MR Rescue DVD was possible, booting F9 selecting SATA2 (HP forum advice). -This...
Hi folks I needed to restore a "broken" Windows SSD on a laptop - normally I use Macrium bootable rescue media - but I'd lost my set of 3 USB sticks I had the rescue media on. !!!!! (Or I'd left them at home). However I had a Windows Virtual...
I have not been able to carry out the first task with Macrium Reflect Free. After clicking Build it appears to be working for a while but every time it gets stuck while trying to create the WiFi function. After running continuously for a while...
Hi folks - Created a Macrium PE 10 rescue media boot environment on a USB drive. Upon boot, the environment asks for Network Drivers for the laptop, which is an Dell Inspiron 5770. It appears that the PE build didn't include them. I'll post...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 21:08.
Find Us




Windows 10 Forums