Win10XPE - Build Your Own Rescue Media

  1. Disk2019's Avatar
    Posts : 58
    MS Win10 + Remnux Linux OS Dual Boot
       #301

    Ok Brother its Done now via customizing scripts with help of Brett Shavers WinFE Developer of MistyPE Project.

    - - - Updated - - -

    I thought that you only could help . Thanks a lot for your hard work & time.

    - - - Updated - - -

    Theres a issue in current win10xpe build . cross check power options even 0 is selected for display shutdown in winxpe build " even then power option after we boot wim file shows 15 min for display auto shut down.
    Source : Win10 Ver 1903 build 18362.86.
    Winxpe used to build is latest 26/04/2019 .
      My Computer

  2. Kyhi's Avatar
    Posts : 3,111
    Windows 3.1 to Windows 10
    Thread Starter
       #302

    Enough already....
    As you clearly have other motives other then Rescue Media Building...
    If you continue in this manner - I will ask a Mod to remove your posts from this topic..
      My Computer

  3. Disk2019's Avatar
    Posts : 58
    MS Win10 + Remnux Linux OS Dual Boot
       #303

    James do you think this question is irrelevant to winxpe build :

    Theres a issue in current win10xpe build . cross check power options even 0 is selected for display shutdown in winxpe build " even then power option after we boot wim file shows 15 min for display auto shut down.
    Source : Win10 Ver 1903 build 18362.86.
    Winxpe used to build is latest 26/04/2019 .
      My Computer

  4. Kyhi's Avatar
    Posts : 3,111
    Windows 3.1 to Windows 10
    Thread Starter
       #304

    Code:
    RegWrite,HKLM,0x4,Tmp_System\ControlSet001\Control\Power\User\PowerSchemes\381b4222-f694-41f0-9685-ff5bb260df2e\7516b95f-f776-4464-8c53-06167f40cc99\3c0bc021-c8a8-4e07-a973-6b14cbcb2b7e,ACSettingIndex,%Seconds_MonitorAC%
    RegWrite,HKLM,0x4,Tmp_System\ControlSet001\Control\Power\User\PowerSchemes\381b4222-f694-41f0-9685-ff5bb260df2e\7516b95f-f776-4464-8c53-06167f40cc99\3c0bc021-c8a8-4e07-a973-6b14cbcb2b7e,DCSettingIndex,%Seconds_MonitorDC%
    Disk2019 said:
    James do you think this question is irrelevant to winxpe build :
    Honestly, based upon your questions and stated error messages - the Errors are of your own making...
    And the questions are for your own personal customizations - Which are relevant to your Development...
    For which I find your constant responses irrelevant to this thread...
    Last edited by Kyhi; 09 May 2019 at 06:39.
      My Computer

  5. Disk2019's Avatar
    Posts : 58
    MS Win10 + Remnux Linux OS Dual Boot
       #305

    Ok James Brother .
      My Computer

  6. dalchina's Avatar
    Posts : 24,305
    Win 10 Pro (1903)
       #306

    @Kyhi - Hi, can you think of any reason why using a boot disk of this type with a RAID or Optane/RAID configuration might not allow the windows partition to be viewed?

    I've seen just one case where someone tried this with an Optane/RAID configuration and the Windows partition was not visible- but others- maybe Recovery (no precise info from OP) were- until RAID was disabled.

    and perhaps indicative - just 2 or 3 cases where
    - a feature update resulted in the RAID configuration being inaccessible (until the previous build was restored)
    - disks configured in RAID were moved from one PC to another, and were inaccessible

    Thanks
      My Computers


  7. Kyhi's Avatar
    Posts : 3,111
    Windows 3.1 to Windows 10
    Thread Starter
       #307

    Missing Driver or Driver Configuration / Driver Info in Registry...
    Other then that - I have not tested with RAID
      My Computer

  8. f14tomcat's Avatar
    Posts : 47,460
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)
       #308

    Kyhi said:
    Missing Driver or Driver Configuration / Driver Info in Registry...
    Other then that - I have not tested with RAID
    I had to insert the RAID0 Intel wacky drivers into my Rescue Thumb I made from you a while back for it to see the M.2 SSD. You helped with the configuration.


    I still have it! I know this is different, but maybe something like this for Dalchina. It solved my problem.

    Code:
    7:28 AM 9/8/2018
    
    Copy the WinPESE Boot.wim into a "C:\Temp" Folder
    Copy the "Drivers for NVMe SSD (install thumb)" Folder into the "C:\Temp" Folder
    
    and run the following from command prompt (admin)
    
    Code:
    
    md "C:\Temp\MountRE"
    dism /Mount-Image /ImageFile:"C:\Temp\Boot.wim" /index:1 /MountDir:"C:\Temp\MountRE" 
    dism /Image:"C:\Temp\MountRE" /Add-Driver /Driver:"C:\Temp\Drivers for NVMe SSD (install thumb)\Production\Windows10-x64" /Recurse /forceunsigned
    dism /Unmount-Image /MountDir:"C:\Temp\MountRE" /Commit
    
    Then you will copy the New Boot.wim from the C:\Temp Folder to the bootable media.
    The new Boot.wim will now contain the SSD drivers your system requires....
      My Computers

  9. Kyhi's Avatar
    Posts : 3,111
    Windows 3.1 to Windows 10
    Thread Starter
       #309

    If the driver is the issue then with XPE on the Build Core Interface ( Bottom Right)
    Export the System Drivers from the host OS that is using the RAID setup..
    Then copy the RAID driver into the "Copy Drivers Here" Folder...
    Enable "Integrate Drivers" checkbox - and continue with build...
      My Computer

  10. dalchina's Avatar
    Posts : 24,305
    Win 10 Pro (1903)
       #310

    Thanks.. will advise OP in thread as appropriate. Also useful to know for future.
      My Computers


 

Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:03.
Find Us




Windows 10 Forums