So far i have now tested both sticks in single channel
Channel 1
The one that i pulled out of slot 3 seems to me be the biggest problem
(Some reason prevents me from uploading the results to...
Type: Posts; User: M Wennemers
So far i have now tested both sticks in single channel
Channel 1
The one that i pulled out of slot 3 seems to me be the biggest problem
(Some reason prevents me from uploading the results to...
By myself see 2nd quote :-)
Well i swaped the non-identical one for the same serial number Ram stick about a (half) year ago
Maybe a year not sure exactly
I will most definitely try this reason i went out to put this to the test might also explain a bit more why.
As it seemed that for (some) programs/games i tested since issues arise it was also...
Since for personal reason i can not replace parts
I did some testing after this Thread:
Link: Full crash/Power loss on videocard
Since maybe i can find out why/what goes wrong,
Or if there is...
I wonder one more thing .... As some/most times it all freezes up
Before all the things go back up to high rates .....
When ever these things happen i see in windows event logger a very clear DLL...
Awesome that is quite a useful link :D
Would a modulair one also be a recomendation ?
Thank you all
It seems this is a very solid answer i could not have hoped for a more than this ! :D
- - - Updated - - -
I did tripple check them for months :)
Even switched to the other...
It should be under "Full/Heavy load here" (To be loseley interpreted)
But it keeps shutting down completely every time it gets under heavy loads
With shutting down i mean that GPU-Z Notices that...
Thank you for confirming that but i can not lower it below 3k on memory
Edit: It seems Gpu-Z Tracks it at decent safe values at this moment
MSI Afterburner and Even My motherboards tuner do not...
I know very well OverClocking is a thing you would need to be extremely careful with etc etc.
My problem is:
GTX 1060 6gb
MSI Shows me:
4006MHz Mem Speed
And
1506MHz Gpu Speed
While doing...
The TDR recovery is at default of 1
should i crank it up ?
- - - Updated - - -
I checked the other PSU only has a 4 pin connector
In terms of the PSU i added 2 files about the 6 pin power...
At this moment i will let it run till i can change it for testing in the morning
So that i have a good log of the Gpu volts and watts without high strain
(Just low load as when youtube runs i.e.)
Ok i will do so asap (Within the next 12-14 hours its past 1am here)
And test the voltages with the otherone connected
If i remember correct it was a six pin volt or wattage that kept being unstable
Would it be best to connect all devices to the powersupply ?
Or only the graphics card ?
As i said it happens long before the miner ran at all
This issue is 6 months old
This miner runs for a day or 3
All given data is without miner installed
However a miner would not help...
I do possibly have one in the spare part mount on my room
Yes 70C when running a game youtube and discord all on 3 different screens
Also the load is at its extremes at that moment since i run a...
I see yes thank you for this advice
How would i check the thermal paste of a Graphicscard ?
Its running at a steady 70 Celcius
Oh and now you mention it i see like maybe 3 times every 5-10 hours...
Ok i tried everything i could been in support mail for over 3 weeks now,
The Nvidia driver keeps crashing i found this out after i started replaying my favorite game
Cause some other games also...
well yes it does that in task manager262002
and this are the settings in power management262003
261997
yes this started before the update already
it was before update 1909
what it was before im not shure is there a way to check this ?
latency mon said something about power trothling ?
tyed to disable that in windows(set it to the right...
yes my pc is a custom build is has the following
nvidia gtx 1060
amd ryzen 5 2600x
aorus b450m motherboard
unknown brand 8 gb ram
unknown brand hdd 1tb
samsung ssd 128 nvme m.2 gb (3 years...
as in the discription my pc some times start to stutter with sound and visual screen movements for up to 5 minutes even
task manager seems not to report unusual behavior of and chip clike cpu gpu...
well seems i found the answer it was an old windows update updated now to 1909
and now my ram useage is at 30-35%
how stupid could i be ! to not update and see if that workes ? :o
well seems we...