I usully have Performance Power mode with Hibernation and Sleep off but did give cmd command a try with no luck. Also tried with Fast Startup on and off but don't think that have any impact on my problem. Long boot with and without that anyway.
The screenshot of boot phases don't show any boot delay ! your desktop (Explorer init) is shown after 10 seconds !
Post a zip into the thread for troubleshooting:
log collector v2-beta08.zip
The logs displayed WHEA 0 x 124 events.
This is typically a hardware problem.
The logs are in another language and partially in English.
This makes it difficult to scan the logs.
There were multiple event log entries where the GPU recovered.
For WHEA 0 x 124 errors a systematic evaluation is done of each CPU, GPU, Drive, and RAM.
For all tests /steps please post images into the thread.
If there are any problems posting images please use one drive or drop box share links.
Share OneDrive files and folders - Office Support
Upload photos and files to OneDrive - OneDrive
1) Open administrative command prompt and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /restorehealth
4) chkdsk /scan
5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
6) Make sure that there is no over clocking while troubleshooting.
7) Sometimes there are problems in the bios that produce bsod.
The BIOS: Version/Date American Megatrends Inc. 3401, 4.12.2017. SMBIOS Version 3.0
8) Please check to see if this is the most up to date version.
9) Open the website for the computer or motherboard manufacturer to view the drivers and post a URL or hyperlink into the thread.
10) To ensure that there are no improper bios settings please reset the bios.
11) Sometimes there can be failure to boot after resetting the bios.
12) Backup the computer files to another drive or to the cloud.
13) Make a backup image usig Macrium:
Macrium Software | Macrium Reflect Free:
Macrium Software | Macrium Reflect Free
14) And please create a brand new restore point.
How to Clear Your Computers CMOS to Reset BIOS Settings:
How to Clear Your Computers CMOS to Reset BIOS Settings
3 Ways to Reset Your BIOS - wikiHow:
3 Ways to Reset Your BIOS - wikiHow
15) If the computer has Ccleaner > click windows tab > scroll down to system and advanced > post an image into the thread
16) In the left lower corner search type clean > open disk cleanup > scroll up and down > post images into the thread
17) In the left lower corner search type: system or system control > open system control panel > on the left pane click advanced system settings
> on the advanced tab under startup and recovery click settings > post an image of the startup and recovery into the thread.
> on the advanced tab under performance > click on settings > click on advanced tab > under virtual memory click on change > post an image of the virtual memory tab into the thread
18) Download and install Whocrashed > in the left upper corner above analyze click on tools > crash dump test > type: ACCEPT
http://www.resplendence.com/whocrashed
19) Click analyze > look for dead or deaddead in the results > post the results into the thread
20) Run this version of the log collector after the above steps:
BSOD - Posting Instructions - Windows 10 Forums
21) When testing for WHEA hardware errors we need to systematically check CPU, GPU, RAM and drive.
Some testing may have been done but there may have been overclocking.
Once the bios is reset and there is no overclocking:
22) Choose one of the temperature monitoring software applications: Speecy, HW monitor, Speed fan:
Speccy - Free Download - Piriform: Speccy - System Information - Free
Speccy - System Information - Free Download
HWMONITOR | Softwares | CPUID: HWMONITOR | Softwares | CPUID
HWMONITOR | Softwares | CPUID
SpeedFan - Access temperature sensor in your computer: SpeedFan - Access temperature sensor in your computer
SpeedFan - Access temperature sensor in your computer
23) Run Prime95 - Stress Test Your CPU
Prime95 - Stress Test Your CPU Windows 10 Performance Maintenance Tutorials
Prime95 - Stress Test Your CPU Performance Maintenance Tutorials
24) Record the maximum temperature and post the maximum temperature into the thread
25) Record test duration and post the uninterrupted test duration into the thread
26) Aim for testing > 3 hrs and abort testing as needed for freezing, temperature changes (see link)
27) Use the Microsoft snipping tool to post images into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
Take Screenshot in Windows 10 General Tips Tutorials
28) Run memtest86+ version 5.01 for at least 8 passes.
Memtest86+ - Advanced Memory Diagnostic Tool
This may take hours so plan to run it overnight.
Please make sure you use the Memtest86+ version 5.01 with the link below.
Memtest86+ - Advanced Memory Diagnostic Tool
The testing is done not by time but by passes.
The more passes the better.
There are a significant number of false negatives if fewer than 8 passes are made.
A false negative is a test pass when there is malfunctioning RAM.
There is 16 GB of RAM on the computer.
Memtest86+ version 5.01 testing takes approximately 1 - 2 hours /GB RAM
Just 1 error is a fail and you can abort testing.
Then test 1 RAM module at a time in the same DIMM each for 8 or more passes.
When Memtest86+ has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.
Memory problems. - Microsoft Community
MemTest86+ - Test RAM BSOD Tutorials
29) Run HD Sentinel: (free or trial edition)
Hard Disk Sentinel - HDD health and temperature monitoring
Hard Disk Sentinel - HDD health and temperature monitoring
a) click disk > surface test > post image into the thread
(this may take several hours to complete)
Post images of each of these tabs into the thread:
b) Overview tab
c) Temperature
d) SMART
e) Disk performance
When it has completed please use the Microsoft snipping to make images and post them into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
Take Screenshot in Windows 10 General Tips Tutorials
30) Run FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials
FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials:
FurMark - GPU Stress Test Performance Maintenance Tutorials
Please make note of the importance of temperature monitoring and aborting the test in the GPU link.
31) Record the maximum temperature and post the maximum temperature into the thread.
32) Record the test duration and post the uninterrupted test duration into the thread.
33) Aim for testing 1 hour.
34) Use the Microsoft snipping tool to post images into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
Take Screenshot in Windows 10 General Tips Tutorials
35) All of these test should be done with the bios reset and no over clocking.
36) For each of the above tests please record maximum temperatures and test duration.
37) And please make sure that you use the Microsoft snipping tool to post images of each into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
38) Please update the information on the computer specifications:
System Specs - Fill in at Ten Forums:
System Specs - Fill in at Ten Forums Site Use Tutorials
In the left corner below in your post you find 'My System Specs'.
After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
System Info - See Your System Specs - Windows 7 Help Forums
Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, etc.)
39) Open administrative command prompt and type or copy and paste: chkdsk /x /f /r
C:\Windows\system32>chkdsk /x /f /r
The type of the file system is NTFS.
Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another
process. Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)
Type: Y
reboot
Run the command on all drives using the syntax: chkdsk /x /f /r C: or chkdsk /x /f /r D: changing the drive letter to the applicable drive.
This may take many hours to run so plan to run it overnight.
40) Post the chkdsk results into the thread:
Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
Well, that is a lot of tests... Don't get me wrong, I will run them and post pictures and results. It will take some time (couple of nights just for some tests) but hopefully will get some promising results. I em at work now but planing to start collecting info once I get home.
Just a question: Is it better to update one post as I get tests done to have every test on one place or open new post for every new test completed?
Thanks again for this "Mega Testing Suite 2018" and will do my best to post results as soon as possible.
Please post results as they are completed.
Then check the list to complete all the testing.
The WHEA 0 x 124 involve a lot of testing to rule in /rule out the hardware.
My tests (pictures are numbered by representing number in "Ultimate testing suite 2018" from post #25), more coming up...
2.
3.Code:Microsoft Windows[Version 10.0.16299.192] (c) 2017 MicrosoftCorporation. All rights reserved. C:\Windows\system32>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100%complete. Windows ResourceProtection did not find any integrity violations. C:\Windows\system32>
4.Code:MicrosoftWindows [Version 10.0.16299.192] (c) 2017Microsoft Corporation. All rights reserved. C:\Windows\system32>dism /online /cleanup-image /restorehealth Deployment Image Servicing and Management tool Version:10.0.16299.15 Image Version: 10.0.16299.192 [==========================100.0%==========================] The restore operation completed successfully. The operation completed successfully. C:\Windows\system32>
7. 3401 is the last version of MB firmwareCode:C:\Windows\system32>chkdsk /scan The type of the file system is NTFS. Stage 1: Examining basic file system structure ... 288768 filerecords processed. File verificationcompleted. 7866 large filerecords processed. 0 bad filerecords processed. Stage 2: Examining file name linkage ... 200 reparserecords processed. 391702 indexentries processed. Indexverification completed. 0 unindexedfiles scanned. 0 unindexedfiles recovered to lost and found. 200 reparserecords processed. Stage 3: Examining security descriptors ... Securitydescriptor verification completed. 51468 datafiles processed. CHKDSK isverifying Usn Journal... 38803600 USNbytes processed. Usn Journalverification completed. Windows has scanned the file system and found no problems. No further actionis required. 243568639 KB total disk space. 63102892 KB in196235 files. 133864 KB in51469 indexes. 0 KB inbad sectors. 404807 KB inuse by the system. 65536 KBoccupied by the log file. 179927076 KBavailable on disk. 4096 bytes in each allocation unit. 60892159 totalallocation units on disk. 44981769allocation units available on disk. C:\Windows\system32>
9. PRIME B350-PLUS Driver & Tools | Motherboards | ASUS USA
14. Restore point created
19.Code:System Information (local)
Computer name: MANFRED Windows version: Windows 10 , 10.0, build: 16299 Windows dir: C:\Windows Hardware: ASUSTeK COMPUTER INC., PRIME B350-PLUS CPU: AuthenticAMD AMD Ryzen 7 1700X Eight-Core Processor AMD586, level: 23 16 logical processors, active mask: 65535 RAM: 17114927104 bytes total
Crash Dump Analysis
Crash dumps are enabled on your computer. Crash dump directories: C:\Windows C:\Windows\Minidump No valid crash dumps have been found on your computer
Conclusion
Crash dumps are enabled but no valid crash dumps have been found. In case you are experiencing system crashes, it may be that crash dumps are prevented from being written out. Check out the following article for possible causes: If crash dumps are not written out. Read the topic general suggestions for troubleshooting system crashes for more information. Note that it's not always possible to state with certainty whether a reported driver is responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.
For the troubleshooting the more files there are the more information there will be for assessing the computer environment.
The logs currently indicate that they were cleaned.
During the troubleshooting process please check any/all of the cleaning software so that the files are not accidentally deleted.
For startup and recovery > system failure > un-check automatically restart.
For any BSOD please post a new zip:
log collector v2-beta08.zip
24. Prime95 test - 7-8 hours
30. Furmark - 1 hour (don't have pic of max CPU temp - was around 85°C)
Quote