Page 11 of 17 FirstFirst ... 910111213 ... LastLast
  1.    29 Sep 2017 #101

    Quote Originally Posted by Plankton View Post
    With the arrival of new CPU....you're going to have to wipe the HDD and clean install OS and install drivers from mobo DVD.
    Same platform all he has to do is drop it in
    There is no need to go through that but i do recommend he get more than one stick of ram which might be the problem all along
      My ComputerSystem Spec
  2.    29 Sep 2017 #102
    Join Date : May 2016
    Posts : 736
    Windows 10 Pro

    Agreed....but I've always done that......just something I do and recommend. It may not be necessary but beneficial up front.

    I totally agree with you on the RAM.....being that it's a dual channel board and only using one channel. Top that off with the fact that the Ryzen series are a bit buggy.
      My ComputerSystem Spec
  3.    29 Sep 2017 #103
    Join Date : May 2016
    Posts : 736
    Windows 10 Pro

    Looking up that mobo manual, there's nothing in there to indicate one way or the other as to the RAM setup. It just shows you how to install the RAM. There are some notes in RED that talks about frequency/voltage limitations and settings.
      My ComputerSystem Spec
  4.    29 Sep 2017 #104

    Quote Originally Posted by Plankton View Post
    Looking up that mobo manual, there's nothing in there to indicate one way or the other as to the RAM setup. It just shows you how to install the RAM. There are some notes in RED that talks about frequency/voltage limitations and settings.
    His manual is about as useful as a handful of magic beans ha

    I had to look real hard for that QVL anyway i think in a whole his system can't handle 1T and him having 8GB he should try the slot dancing game and try other slots it could a bad one those are the only other options but i also think his cpu was bottlenecking even though Jayztwocents says otherwise

    Some of these ryzen 1300x paired with 1060 3Gb cards show very high usage almost max pretty much which tells me a cpu shouldn't work that hard at 1080p
      My ComputerSystem Spec
  5.    29 Sep 2017 #105
    Join Date : May 2016
    Posts : 736
    Windows 10 Pro

    His manual is about as useful as a handful of magic beans ha
    Just about spit my coffee out I laughed so hard....LOL!

    May be down to just bad hardware.....ie cpu/mobo/GPU.


    As a side note: I love it when users say they have a high in custom built PC and then give to the specs that are no better than an off the shelf OEM tower. It just kills me to know end.... they think if they spent upwards of $700 that it's top shelf. I think that's enough venting.

    NO disrespect to you or your build ablao.
      My ComputerSystem Spec
  6.    29 Sep 2017 #106

    Quote Originally Posted by Plankton View Post
    Just about spit my coffee out I laughed so hard....LOL!

    May be down to just bad hardware.....ie cpu/mobo/GPU.


    As a side note: I love it when users say they have a high in custom built PC and then give to the specs that are no better than an off the shelf OEM tower. It just kills me to know end.... they think if they spent upwards of $700 that it's top shelf. I think that's enough venting.

    NO disrespect to you or your build ablao.
    They have a name scheme for it now so actually you have

    #1 Beginners I31200x 1300x Gtx1030 Rx 460 Rx 560
    #2 Mid Range `1400 1400x 1500 1500x I3 G4 Gtx 1050ti 1060 Rx470-480 570
    #3 High End 1600 1600x 1700 I5 I76700K 7700K Gtx 1070 1080 RX 580 RX 56
    #4 Enthusiast 1700X 1800 1800X i7 5820K 5930K -5960K 6800K 6850K 6900K 6950X and 7th Gen Vega 64 GTX1080Ti Titan

    In a nutshell they seem to make this into a tier system by hardware from what i been seeing
      My ComputerSystem Spec
  7.    30 Sep 2017 #107
    Join Date : Jul 2014
    Serbia
    Posts : 10,427
    W10 Insider + Linux

    There would be at least another tier before your #1, Office machine where only requirement is to be stable and reliable. Another thing is that borders of those tiers could be blurred with careful OC and setup. That's what I usually do. Take as good components as I can afford and try to make it jump into next bracket.
      My ComputersSystem Spec
  8.    30 Sep 2017 #108
    Join Date : Sep 2017
    Posts : 104
    w10
    Thread Starter

    yes im going to overclock to around 3.9 if i can
      My ComputerSystem Spec
  9.    30 Sep 2017 #109
    Join Date : May 2015
    Posts : 137
    Windows 10 Pro

    Read this whole thread and don't believe it took nearly two weeks and 8 pages before a new poster with 1 post stated the obvious, the 8 GB of RAM he has installed is at or nearly full. That right there would cause all kinds of unnecessary pagefile usage, which would go a long way to explaining the problem.

    Also only a single stick of 8 GB RAM instead of 2x4 GB would help.

    Another thing is that Ryzen loves memory bandwidth and he only has 2133. At a minimum should be using 2666. 3200 is even better, but with the insane memory prices right now, if you have to compromise somewhere, using 266 won't hurt anywhere near as much as 2133.

    The GTX 1060 3 GB isn't helping matters either. A few of the games listed by the OP can and will use more than that if the game settings are too high, causing the frame drops and lag. It will also cause the card to dip into system memory, which is far slower than the memory on the card.
      My ComputerSystem Spec
  10.    30 Sep 2017 #110
    Join Date : Sep 2017
    Posts : 104
    w10
    Thread Starter

    Quote Originally Posted by stormy13 View Post
    Read this whole thread and don't believe it took nearly two weeks and 8 pages before a new poster with 1 post stated the obvious, the 8 GB of RAM he has installed is at or nearly full. That right there would cause all kinds of unnecessary pagefile usage, which would go a long way to explaining the problem.

    Also only a single stick of 8 GB RAM instead of 2x4 GB would help.

    Another thing is that Ryzen loves memory bandwidth and he only has 2133. At a minimum should be using 2666. 3200 is even better, but with the insane memory prices right now, if you have to compromise somewhere, using 266 won't hurt anywhere near as much as 2133.

    The GTX 1060 3 GB isn't helping matters either. A few of the games listed by the OP can and will use more than that if the game settings are too high, causing the frame drops and lag. It will also cause the card to dip into system memory, which is far slower than the memory on the card.
    hi yes i am going to get another 8gb ram soon as possible and when i get the new cpu(today) i will try and oc ram to atleast 2666
    and about the gpu yeah ik it wont run games a max settings bla bla im fine with medium settings if it gets me above 60fps
      My ComputerSystem Spec

 
Page 11 of 17 FirstFirst ... 910111213 ... LastLast


Similar Threads
Thread Forum
Solved How do I completely reset newly purchased custom built PC?
I purchased a new custom built pc and they have already installed a version of windows 10 which I don't intend to use in any cost. I know that there is an option to reset this pc in windows but it will only reinstall the same windows again, how do i...
General Support
Solved Occasional micro-stuttering / lag-spikes
Good day, I have recently discovered that my laptop (running Windows 10 now) is suffering from a form of millisecond-stuttering or lag spikes (whatever floats your boat to call it) I have done quite some research on it already, so you don't have...
Performance & Maintenance
Newly DIY Built PC with BSOD Issues
My PC was only built about a week ago, and has many different BSODs throughout the week. I have managed to solve quite a few of them, and currently these are the ones that are still bugging me, mainly ntoskrnl.exe I have tried memtest and...
BSOD Crashes and Debugging
Micro-Stuttering After Days of Power-On Time
For the most part, I finally got Windows 10 to work, except I have a micro-stuttering problem after just a few days of power-on time. I also have a WD My Cloud on my home network, so I'm wondering, does backing up to cloud storage have a negative...
Performance & Maintenance
Fairly random BSOD, event 41, kernel-power (newly built PC)
So I've just built a PC and within a day it has had BSOD a couple of times. The event viewer says event 41, kernel-power, category 63 When I did build my computer the RAM was an issue, and was fixed after moving it to a different slot. It's DDR4...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:21.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums