Page 2 of 2 FirstFirst 12
  1.    22 Jun 2017 #11
    Join Date : Aug 2016
    S/E England
    Posts : 4,490
    10 Home x64 (1709) (10 Pro on 2nd pc)

    It my help if you took a few steps back and explained what prompted you to try DISM in the first place. Were you experiencing problems with your system?

    Generally, before trying DISM the first step is to check for corrupted system files. In an admin command prompt type...
    SFC /SCANNOW

    Note
    If SFC could not fix something, then run the command again to see if it may be able to the next time. Sometimes it may take running the sfc /scannow command up to 3 times with Fast Startup turned off and restarting the computer after each time to completely fix everything that it's able to.
    Run SFC Command in Windows 10

    The error 0x80010108 seems to be associated with accessing the update servers, it has also been seen with windows update and windows upgrades. The 'Wait a few minutes and try running the command again' message is just in case the problem is at the server end.

    If after running sfc /scannow you still have this error, try the /LimitAccess option to prevent DISM from contacting the update servers.

    dism /online /cleanup-image /ScanHealth /LimitAccess
      My ComputersSystem Spec
  2.    22 Jun 2017 #12
    Join Date : Oct 2016
    Posts : 49
    Windows 10 Home
    Thread Starter

    Recently I had a support person from where I purchsed this PC log in remotely in order to 1) Partition my hard drive, 2) Install Windows 7 in that partition. No matter what he tried, Windows 7 could not be installed. On several occasions I had to use the power button as the aborted Windows 7 install did not allow the PC to reboot. Since than I have experienced the occasional hang where I needed to use the Power button to reboot the system. Also, I had a message two days ago that suggested that I did 'something' as there was possible corruption. When I did that it was reported that an invalid IP configuration had been fixed and something else. That may have explained why I was having problems with accessing the Internet and I was unable to connect to my WiFi Router. That issue has not returned. I have already run sfc /scannow at least one. I am running it now as suggested. Fast Starup is turned on. I run commands from Command Prompt (Admin).
      My ComputerSystem Spec
  3.    22 Jun 2017 #13
    Join Date : Oct 2016
    Posts : 49
    Windows 10 Home
    Thread Starter

    sfc /scannow has finished. The /LimitAccess command gave an error. See below.

    C:\windows\system32>SFC /SCANNOW

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection did not find any integrity violations.

    C:\windows\system32>dism /online /cleanup-image /ScanHealth /LimitAccess

    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0

    Image Version: 10.0.15063.0


    Error: 87

    The limitaccess option is not recognized in this context.
    For more information, refer to the help.

    The DISM log file can be found at C:\windows\Logs\DISM\dism.log

    C:\windows\system32>

    Will run sfc /scannow again tomorrow.
      My ComputerSystem Spec
  4.    22 Jun 2017 #14
    Join Date : Aug 2016
    S/E England
    Posts : 4,490
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Sorry, your right. /LimitAccess only applies when using /RestoreHealth.
      My ComputersSystem Spec
  5.    23 Jun 2017 #15
    Join Date : Oct 2016
    Posts : 49
    Windows 10 Home
    Thread Starter

    Ran the following overnight:

    dism /online /cleanup-image /restorehealth /limitaccess

    This failed as before. See partial log file for this session.



    I have run sfc /scannow twice this morning having shutdown and rebooted before each run. Currently running it for the third time. So far sfc has come bakc with any error. see below.

    C:\windows\system32>sfc /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection did not find any integrity violations.

    C:\windows\system32>

    So, sfc finds nothing and I cannot run DISM to completion.

    Later .....

    sfc /scannow completed the third run without reporting any problems.

    The following DISM command ran succesffully See below.

    C:\windows\system32>dism /online /cleanup-image /RestoreHealth /limitaccess

    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0

    Image Version: 10.0.15063.0

    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.

    C:\windows\system32>

    Even later .....

    Ran the DISM command again but this time without the /limitaccess. See results below.

    C:\windows\system32>dism /online /cleanup-image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0

    Image Version: 10.0.15063.0

    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.

    C:\windows\system32>

    **** Something I having reported so far is that i did run chkdsk /f C: before the last two runs of DISM ****
    No errors were reported.

    Can I now conclude that I have a Healthy Windows 10 system?
    Any idea what fixed the DISM issues?
    Windows 10 and DISM help required please Attached Files
    Last edited by Nolly1959; 23 Jun 2017 at 02:30.
      My ComputerSystem Spec
  6.    23 Jun 2017 #16
    Join Date : Aug 2016
    S/E England
    Posts : 4,490
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Quote Originally Posted by Nolly1959 View Post
    ....Ran the DISM command again but this time without the /limitaccess. See results below.

    C:\windows\system32>dism /online /cleanup-image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 10.0.15063.0

    Image Version: 10.0.15063.0

    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.

    C:\windows\system32>

    ...Can I now conclude that I have a Healthy Windows 10 system?
    Finally! - yes, it would appear so...

    Any idea what fixed the DISM issues?
    At a guess, you have nibbled away at the problem bit by bit until it was fixed. Apparently DISM could have corrected some errors along the way, even if it reported a failure at the end...
    ...what many are not realizing is that both DISM /Online and DISM /Image: (run offline, after booting from install media) do actually repair the component store, if there is any other issue (aside from the FlightSigning package)...
    Creators update component store shows corruption but unable to repair - Post #93

    A forensic examination of the CBS.log may show if/when/what was repaired, but as DISM now reports 100% success that would only be an exercise to satisfy curiosity.
      My ComputersSystem Spec
  7.    23 Jun 2017 #17
    Join Date : Oct 2016
    Posts : 49
    Windows 10 Home
    Thread Starter

    OK and many thanks. If I find the CBS.log (did try) I might take a look to see if there is anything obvious.

    I guess this post can be Mark(ed) as Solved. Should I do that?

    Cheers,
    Nolly
      My ComputerSystem Spec
  8.    23 Jun 2017 #18
    Join Date : Aug 2016
    S/E England
    Posts : 4,490
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Quote Originally Posted by Nolly1959 View Post
    I guess this post can be Mark(ed) as Solved. Should I do that?
    Yes, I would as DISM now works without error.

    Should other problems appear later on down the line you can always start a new thread. I'm subscribed to this thread, so if you post a link here I'll be alerted.
      My ComputersSystem Spec

 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
DISM: How long should the DISM scan take to complete ?
Normally when a tests completes without reporting anything wrong I'm happy camper. I have been wanting to ask a question about the DISM "scan" completing rather quickly. I seem to remember the command taking some time to finish, but for a while...
Performance & Maintenance
Windows DISM and SFC fail to fix corruptions. DISM error 1726 / WIN 10
Hello, as you already know from the title I have problems with the windows utilities that fix corruptions. After I upgraded to build 1607, those utilities worked, but now after a few weeks I tried to do them again after some driver updates just to...
Performance & Maintenance
Windows 10 Recovery Help required
Hi! I need to restore from a backup image. Firstly the restore from the original installation disc cannot find the image, even though there are at least 4 sat on various connected HDD's. Also, if I create a recovery drive on a USB stick, is that...
Performance & Maintenance
Solved DISM Error: 1812 - Can't run DISM or SFC, Win apps won't open
Hello, I've run into a problem where my windows apps will not open. Calc opens with a gray screen just showing the calculator logo...calendar opens to a blue screen only showing the calendar logo, etc. I can't run SFC /scannow due to error...
General Support
What Requirements are Required for Windows 10?
Does anyone know what the requirements are for Windows 10?
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:16.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums