Windows 10: DISM problem , on windows 10 creators update , ver.1703 Solved

  1.    04 May 2017 #1

    DISM problem , on windows 10 creators update , ver.1703


    Hi ,
    two days ago ( 2/5/2017) upgraded my windows 10 system from ver.1607 to ver.1703 , so called Creators update
    and immediately ran sfc /scannow ( no integrity violation ), DISM /Online /Cleanup-Image /ScanHealth ( component store repairable ) and DISM /Online /Cleanup-Image /RestoreHealth ( Error : 0x800f081f or 0x800f0906 The source files could not be downloaded ) then DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:K:\Sources\Install.wim:1 which resulted in the same error . I have to refer that I use the Image_Health tool taken from windows 10 Forum , for all the above commands and others as DISM /Online /Cleanup-Image /StartComponentCleanup , etc . Some rumors from internet (googling) say , this is a Microsoft error which must be fixed ? Is there any solution so far ?
    Thanks for your attention .

    P.S. ver.1607 had no problem of the kind , that's why I keep a latest System Image , just in case ...
      My ComputerSystem Spec

  2. Bree's Avatar
    Posts : 8,627
    10 Home x64 (1803) (10 Pro on 2nd pc)
       04 May 2017 #2

    babis49 said: View Post
    Some rumors from internet (googling) say , this is a Microsoft error which must be fixed ? Is there any solution so far ?
    Most of the Google searches eventually lead to items that credit this thread for identifying the cause and suggesting some registry fixes.
    Creators update component store shows corruption but unable to repair

    1703's DISM can be run successfully to completion if it is run offline...
    Use DISM to Repair Windows 10 Image
    ...so I am prepared to wait for MS to get round to issuing a fix.
      My ComputersSystem Spec

  3.    05 May 2017 #3

    Bree
    boot from dvd --> troubleshoot -->command prompt -->Diskpart ---> list volume ---> to ensure the drive letters and paths
    I followed everything you wrote for offline run of DISM command
    although copied from you , with necessary changes in drive letters , the response was an error 2 saying " ..be sure for right path and Read permissions of the source file , that is , install.esd , I guess .
    What to do next ?
    thanks
      My ComputerSystem Spec

  4. JohnBurns's Avatar
    Posts : 361
    Windows 10 1803 Build 17134.191
       05 May 2017 #4

    I think this is a problem Microsoft should be dealing with. I found that just by running Dism /Online /Cleanup-Image /ScanHealth orDISM /Online /Cleanup-image /RestoreHealth the errors would come back. After restoring Macrium backup image from the previous day, both Dism /Online /Cleanup-Image /CheckHealth and SFC /Scannow are clean. Strange...
      My ComputerSystem Spec

  5. Bree's Avatar
    Posts : 8,627
    10 Home x64 (1803) (10 Pro on 2nd pc)
       05 May 2017 #5

    babis49 said: View Post
    ...the response was an error 2 saying " ..be sure for right path and Read permissions of the source file , that is , install.esd , I guess...
    It sounds like, despite your best efforts, you haven't correctly identified the Drive and Path to the install.esd. Before running the DISM command, try running dir install.esd /s from the root of the drive you think it should be found on.

    Code:
    Microsoft Windows [Version 10.0.15063]
    (c) 2017 Microsoft Corporation. All rights reserved.
    
    C:\Users\owner>D:
    D:\>dir install.esd /s
     Volume in drive D is Data
     Volume Serial Number is 3CC4-62F0
    
     Directory of D:\x64\sources
    
    05/04/2017  19:44     3,056,948,730 install.esd
                   1 File(s)  3,056,948,730 bytes
    
         Total Files Listed:
                   1 File(s)  3,056,948,730 bytes
                   0 Dir(s)   7,481,409,536 bytes free
    D:\>
      My ComputersSystem Spec

  6.    05 May 2017 #6

    Bree
    Click image for larger version. 

Name:	2017_05_05_18_44_531.png 
Views:	48 
Size:	21.6 KB 
ID:	133618
    the drive K:\ becomes H:\ ESD-ISO Label in command prompt , and C:\ becomes D:\ as shown in diskpart>list volume etc , so I proceed with your Dism command line changing only the drive letters , what else to do ?
      My ComputerSystem Spec

  7. Bree's Avatar
    Posts : 8,627
    10 Home x64 (1803) (10 Pro on 2nd pc)
       05 May 2017 #7

    babis49 said: View Post
    ...the drive K:\ becomes H:\ ESD-ISO Label in command prompt , and C:\ becomes D:\ ...
    When you boot from the DVD is H: the drive with sources\install.esd on it and D: the drive with your \Windows folder on it?

    First you need to create the C:\Scratch folder before you boot from the DVD. Boot from the DVD to the command prompt. Do a 'dir' of D: and H: to check you have got the right drive letters. If they are correct, as your specs say you have Pro your DISM command should be:

    Code:
    DISM /Image:D:\ /Cleanup-Image /RestoreHealth /Source:ESD:H:\sources\install.esd:1 /ScratchDir:D:\Scratch

    ( for Home use: install.esd:2 )
      My ComputersSystem Spec

  8.    05 May 2017 #8

    Bree
    it's a great success . I hadn't created the Scratch folder on C:\ because I didn't realize its meaning , after googling I got it ! ! !
    thanks a lot , you're a really nice guy ! ! !
      My ComputerSystem Spec

  9. Bree's Avatar
    Posts : 8,627
    10 Home x64 (1803) (10 Pro on 2nd pc)
       05 May 2017 #9

    Glad it worked out for you in the end.
      My ComputersSystem Spec


 

Related Threads
I am also also using latest Classic Shell..... I have tried all reg edits etc listed on this forum and all they do is enable "auto arrange" to show so I can ck or unck it but uncked it will not allow me to even move folders or icons which are inside...
Windows 10 Creators update and DISM in Performance & Maintenance
Hi there - Using Win 10 Anniversary Update I had no problem fixing the installation using DISM. Having done a clean install of the Creator Update and using DISM I get the message: The component store is repairable - The operation completed...
I updated it but powershell looks weird...Free Online Screenshot - Capture, Editor, Uploader, etc. anyone knows how to fix it ? sfc /scannow now didn't find any violations . PowerShell ISE works fine. ha.... it seems the fonts were...
Has anyone been able to download symbols from the MS symbol server for the public release of Creators Update 1703 (build 15063.13)? I've posted this at MSDN but so far no answers. Am I missing something? Soon after upgrading this week from...
Hello, I'm running Windows 10 Pro Anniversary (1607) with Microsoft RSAT (Remote Server Administrative Tools) 1.2 which was a special "newer" version of these tools I needed when I upgraded from Windows 10 1511. I have the Windows 10 upgrade...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:26.
Find Us