Wrong RAM speed in Windows Task Manager Solved

Page 1 of 3 123 LastLast
  1. Faith's Avatar
    Posts : 948
    Windows 10 Home May 2019 Update 64-bit

    Wrong RAM speed in Windows Task Manager

    Hello. So it looks like in Windows task manager my RAM speed is set at 2800 MHz in slot 1, 3, 5 and 7, but my RAM are using XMProfile 1 at 2666 MHz in BIOS. CPU-Z also tells me that my RAM is in quad channel configuration at 1333 MHz (2666 Mhz divided 2).

    What's the dealio? Is it a Windows bug or something else? My RAM is also reported in the task manager as 16GB (other) instead of DDR4.
      My ComputerSystem Spec

  2. Berton's Avatar
    Posts : 5,883
    Win10 Home and Pro, Win10 Insider Preview, WinXP Home Premium, Linux Mint

    The speed of the RAM will always default to the slowest of the installed modules if all are not matched to each other, module capacity usually is not a problem. Most times users will not notice any issue with modern computers, it was a problem years ago as things were moving from 80286 to 80386 to 80486 to Pentium-class processors.
      My ComputerSystem Spec

  3. Faith's Avatar
    Posts : 948
    Windows 10 Home May 2019 Update 64-bit
    Thread Starter

    I don't understand. Are my RAM modules not matched properly? I have them set at 2666 MHz in BIOS, but Windows shows them at a higher speed of 2800 Mhz. I have two X.M.Profiles available (profile 1= 2666 / Profile 2= 2800), but I use profile 1 because it's at lower voltage. Could it be that Windows detects profile 2 even though it's not active?
    Last edited by Faith; 02 Mar 2017 at 18:59.
      My ComputerSystem Spec

  4. TairikuOkami's Avatar
    Posts : 3,794
    Home 1903 x64 10.0.18362.239

    Just ignore it. Task manager displays default info based on the info provided by the manufacturer, not real one. In my case it shows 1866, I have 2133 and it also shows my CPU max speed as 3,8 instead of 4,3.

    What is your RAM's precise name/ID? If it states, it is 2800 MHz RAM, well there you have it. This?

    Vengeance(R) LPX 16GB (4x4GB) DDR4 DRAM 2800MHz C16 Memory Kit - Black (CMK16GX4M4A2800C16)
      My ComputerSystem Spec

  5. Faith's Avatar
    Posts : 948
    Windows 10 Home May 2019 Update 64-bit
    Thread Starter

    The box says Corsair Vengeance LPX DDR4 2666MHz 16GB 4x4GB 2666MHz (PC4-21300) DDR4 Unbuffered CL15-17-17-35, 288pin, Black. So it's definitely advertized at 2666MHz, so I don't know why I have two X.M.Profiles on them, or why Windows shows 2800MHz. The 2800Mhz modules are actually more expensive too which doesn't make any sense if these memory sticks support 2800 Mhz aswell at a lower cost. What's up with that?

    I'm guessing this is just a Windows bug and I should ignore it, but I am curious as to why Windows shows this number though.
      My ComputerSystem Spec

  6.    #6

    This is more of a limitation of Task Manager than a bug. The purpose of Task Manager is not to provide detailed hardware information. That is what CPU-Z is for. There are all kinds of problems in obtaining this information and even programs like CPU-Z don't always get it right.

    Task Manager does provide hardware information that is deemed relevant to it's purpose and can be obtained without undue difficulty. It does not have access to BIOS configuration information so must rely on what can be read from the memory modules. The only reasonable alternative would be to not show the information at all.
      My ComputerSystem Spec

  7. Faith's Avatar
    Posts : 948
    Windows 10 Home May 2019 Update 64-bit
    Thread Starter

    If it's a limitation then why can other programs like CPU-Z, Speccy and AIDA64 tell me the correct speed and Windows can't? Doesn't Windows have access to the same information as these programs?
      My ComputerSystem Spec

  8.    #8

    Obtaining the information that CPU-Z provides is a complex thing and prone to error. Among other things it requires a kernel driver. This would add considerable complexity to Task Manager and create issues with non admin users. And all to provide a few numbers which few people would care about and whose relevance to Task Manager's purpose is marginal. And there are already a wide variety of programs that provide this information and much more, CPU-Z being only one.

    Edit: Microsoft could have added this capability to Task Manager but for the above mentioned reasons chose not to. In my view it was a wise choice.
      My ComputerSystem Spec

  9. Faith's Avatar
    Posts : 948
    Windows 10 Home May 2019 Update 64-bit
    Thread Starter

    I see, but I don't quite understand why it seems random that for some users the correct frequency is shown while for others it is not. That's why I thought it was a bug because I've seen users with similar Corsair memory modules show the correct speed in Windows 10. Could it be that it is very specific to what ID the RAM use? Or what mainboard is used? I'm sure I saw them at 2133Mhz in the task manager when I first built this PC. I think it got stucked at 2800 once I started playing around with the X.M.Ps. As long as this doesn't causes any errors or issues in the future then I can put my mind at ease.
      My ComputerSystem Spec

  10.    #10

    TairikuOkami said: View Post
    Just ignore it. Task manager displays default info based on the info provided by the manufacturer, not real one.
    Not true, mine shows 2800 MHz in Task Manager, and it`s default speed is 2133, like most high speed ram.

    Faith, there is nothing wrong with having 2 XMP profiles, I bought 2666 and was quite happy when I saw 2800 along with 2666. :)

    Why don`t you just run it at 2800 MHz, there`s nothing wrong with having the voltage at 1.35, it`s totally normal. You have an X99 board and a 5820K, You should take full advantage of it.

    And I don`t see DDR4 or "other" anywhere in my shot, post a snip of yours.
    Attached Thumbnails Attached Thumbnails Capture.JPG  
    Last edited by AddRAM; 04 Mar 2017 at 02:53.
      My ComputersSystem Spec

Page 1 of 3 123 LastLast

Related Threads
I have a machine whose disk is nearly always running at 99-100% usage (according to Task Manager) even though no individual tasks appear to be responsible. For instance there might be three tasks running at 0.1MB/s and the rest at 0MB/s, but the...
I have attached a screenshot of my CPU usage in programs and usage monitors below. I am extremely fed up at this point so hopefully this post will make sense :) The problem I have noticed my CPU usage in task manager is always 100% and the boost...
task manager cpu speed in Performance & Maintenance
Just this past month my cpu speed is down to around 1.5GHz but it used to be around 2.5GHz. My computer is also slower. Does anyone know why this is and how to solve this issue?
Windows 10 - task manager - details tab in Performance & Maintenance
hello, i have a lot going on in the 'details' tab in my task manager, i was wondering what a standard details tab list for windows 10 would look like so i can narrow down which processes i don't need.
Anyone eperienced this before? My cpu is a 3.8ghz oc'd to 4.5. task manager does report max speed being 4.5ghz. But live report is reporting as high as 5.9ghz. 83166 Is this just a bug ?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:01.
Find Us