New
#1
Windows 10 Preparing Automatic Repair, Fails, boots on second try.
This is a Dell Precision M7510. Has a Samsung 950 NVME 512GB SSD in the M.2 slot as the main OS drive. A secondary 512GB SSD is installed in the SATA slot as a DATA drive. This system has Windows 10 Pro on it, installed from an imaging software at our work. Countless other systems have this same WIndows 10 image without issue. Two other 7510s have the same setup (M.2 boot drive) without issue.
I power on this system and after about 10 seconds I get the "preparing automatic repair". Then Diagnosing PC, Attempting repairs, then "Couldn't repair" Shutdown or Advanced Options. If I shut the computer down, turn it immediately back on it boots just fine. Here is a copy of the srttrail.txt file.. Any ideas?
Startup Repair diagnosis and repair log---------------------------Number of repair attempts: 1Session details---------------------------System Disk = \Device\Harddisk0Windows directory = C:\WINDOWSAutoChk Run = 0Number of root causes = 1Test Performed: ---------------------------Name: Check for updatesResult: Completed successfully. Error code = 0x0Time taken = 0 msTest Performed: ---------------------------Name: System disk testResult: Completed successfully. Error code = 0x0Time taken = 0 msTest Performed: ---------------------------Name: Disk failure diagnosisResult: Completed successfully. Error code = 0x0Time taken = 0 msTest Performed: ---------------------------Name: Disk metadata testResult: Completed successfully. Error code = 0x0Time taken = 0 msTest Performed: ---------------------------Name: Target OS testResult: Completed successfully. Error code = 0x0Time taken = 62 msTest Performed: ---------------------------Name: Volume content checkResult: Completed successfully. Error code = 0x0Time taken = 63 msTest Performed: ---------------------------Name: Boot manager diagnosisResult: Completed successfully. Error code = 0x0Time taken = 0 msTest Performed: ---------------------------Name: System boot log diagnosisResult: Completed successfully. Error code = 0x0Time taken = 0 msRoot cause found: ---------------------------Boot manager failed to find OS loader.Repair action: File repairResult: Failed. Error code = 0x490Time taken = 2485 msRepair action: Boot configuration data store repairResult: Failed. Error code = 0x490Time taken = 47 ms------------------------------------------------------