Windows 10: scanning and repairing drive stuck
scanning and repairing drive stuck
soo today i turned onn my laptop and some programs didnt work. So i decided to do a dick check and repair. it god stuck at 6% for about half an hour i rebooted several times but it kept stoping at 6%. Now i left it scanning for almost 2 hours and it's still at 6%
Welcome to the TenForums.
Did chkdsk ever complete?
Hi. Somewhat similar problem, so I didn't want to start a new thread..In an effort to diagnose a sluggish freezing computer (windows 10) I mistakenly ran checkdsk c: f/ r/ x . It has been running for almost 3.5 full days now. Was at 0% for a while, bumped to 5%, then 11% for about 1.5 days and now at 12% for over 24 hours. And I have been reading that I need to let it keep running in order to avoid further damage. But it is a large drive, and at this rate it could take weeks to complete. I need some thoughts about whether I should keep waiting... or any other suggestions. Thank you. Joni
Be the first person to mark this helpful
When you run Check Disk (error checking) with the /R switch, it checks for Bad Sectors. If you don't have any Check Disk should only take a few hours. But it you have too many, then it could go on overnight or longer. The longer the scan the more bad sectors you have. If it has only been going for a few hours, I would let it run, and check it periodically and plan on getting a new HDD. If it has been going on for days, then just replace the HDD.
Thank you very much for reconfirming it is time to initiate "Plan B". J
any help to fix this will help.......at present have decided to let it run for the rest of the day to see if it completes; if I switch laptop off. it comes up with a screen to say hit any key to stop it going into scanning and repair mode or clean...
When my computer does a chkdsk /r, and restarts, the scan will get stuck on 100%. I've let it sit for over 16 hours and it stays stuck. If I hit the reset button, it''ll restart, the Scanning and Repairing Drive C 100% Complete momentarily comes...
I restarted my Lenovo laptop the other day to its factory settings, and it's been stuck at 100% for Scanning and repairing drive (C:) since yesterday when I woke up. So it's basically been stuck for an entire 24+ hours at 100%. What do I do?
I have been patiently waiting for a period of 1 hour looking at the screen of my laptop. At this present moment, Windows is stuck 'Scanning and Repairing Drive D: 9% Complete'. Can anyone help me?
I apologize in advance for wall of text !! Trying to supply as much information as I can.
I have a Windows 10 HP that's around 2 years old. The computer is in good shape physically but has not had antivirus for a while. Recently while on the...