Page 1 of 2 12 LastLast
  1.    27 Sep 2016 #1
    Join Date : Aug 2016
    Posts : 22
    Windows 10

    Can`t enable Hibernation! - Regedit/POWERCFG not helping!


    Calling all windows 10 experts! I need your help!

    Just updated my Transformer T100HA to the Anniversary update. In order to get enough disk space to perform the update, I disabled hibernation with POWERCFG /h off from the command line, which disabled hibernation, deleted the hibernate file and gave me enough space to upgrade.

    Now I`m successfully on the anniversary update, I simply cannot get Hibernation to turn on again. Heres what I`ve tried to far,

    Registry change (from this very foum) - tried both the .REG file and updating manually.
    POWERCFG /h ON from and elevated command line
    Full system restore/reset from settings

    Still I cant see the option to hibernate in advanced power options!

    When I look in power options the hibernation option is simply not there.

    Really appreciate some help as I`ve run out of ideas. thanks!
      My ComputerSystem Spec
  2.    28 Sep 2016 #2
    Join Date : Oct 2014
    Trnava
    Posts : 2,758
    Windows 10.4 Home 1709 x64

    • Go to: Control Panel - Power Options - Change Plan Settings - Change Advanced Power Settings.
    • Choose, when you want to hibernate, eg. Power buttons and lid - Power button action - Hibernate.


    When hiberfil.sys file is created on C partition, you will know, that you have succeeded.
      My ComputerSystem Spec
  3.    29 Sep 2016 #3
    Join Date : Aug 2016
    Posts : 22
    Windows 10
    Thread Starter

    Quote Originally Posted by TairikuOkami View Post
    • Go to: Control Panel - Power Options - Change Plan Settings - Change Advanced Power Settings.
    • Choose, when you want to hibernate, eg. Power buttons and lid - Power button action - Hibernate.


    When hiberfil.sys file is created on C partition, you will know, that you have succeeded.
    Many thanks for the reply.

    Unfortunately the hibernate option are not available to me in control panel - which is my problem!
      My ComputerSystem Spec
  4.    29 Sep 2016 #4
    Join Date : Oct 2014
    Trnava
    Posts : 2,758
    Windows 10.4 Home 1709 x64

    Run CMD as admin and copy/paste:


    reg add "HKLM\System\CurrentControlSet\Control\Session Manager\Power" /v "HiberbootEnabled" /t REG_DWORD /d "1" /f
    powercfg -h on
      My ComputerSystem Spec
  5.    29 Sep 2016 #5
    Join Date : Aug 2016
    Posts : 22
    Windows 10
    Thread Starter

    Quote Originally Posted by TairikuOkami View Post
    Run CMD as admin and copy/paste:


    reg add "HKLM\System\CurrentControlSet\Control\Session Manager\Power" /v "HiberbootEnabled" /t REG_DWORD /d "1" /f
    powercfg -h on
    I`ve tried the registry changes once before, but I`ll give this a try just in case, and I`ll let you know the result tonight. Thanks again for your help.
      My ComputerSystem Spec
  6.    29 Sep 2016 #6
    Join Date : Oct 2014
    Trnava
    Posts : 2,758
    Windows 10.4 Home 1709 x64

    Hope it works. Actually I have hibernate disabled and there is not the option, but once those are applied, it appears.

      My ComputerSystem Spec
  7.    29 Sep 2016 #7
    Join Date : Jun 2016
    Posts : 1,462
    Win10 1607

    perhaps if room is that tight there simply is not enough room for powercfg -h On to create the File?

    KB
      My ComputerSystem Spec
  8.    29 Sep 2016 #8
    Join Date : Aug 2016
    Posts : 22
    Windows 10
    Thread Starter

    Quote Originally Posted by TairikuOkami View Post
    Run CMD as admin and copy/paste:


    reg add "HKLM\System\CurrentControlSet\Control\Session Manager\Power" /v "HiberbootEnabled" /t REG_DWORD /d "1" /f
    powercfg -h on
    no joy.....BTW for referenceI have already done a cleanup of the drive after installing the anniversary update and have 14GB free.

    C:\WINDOWS\system32>reg add "HKLM\System\CurrentControlSet\Control\Session Manager\Power" /v "HiberbootEnabled" /t REG_DWORD /d "1" /f
    The operation completed successfully.

    C:\WINDOWS\system32>powercfg -h on

    C:\WINDOWS\system32>shutdown /h
    The request is not supported.(50)

    C:\WINDOWS\system32>
      My ComputerSystem Spec
  9.    29 Sep 2016 #9
    Join Date : Oct 2014
    Trnava
    Posts : 2,758
    Windows 10.4 Home 1709 x64

    Quote Originally Posted by scoob101 View Post
    C:\WINDOWS\system32>shutdown /h
    The request is not supported.(50)
    That is it, I have got a message 126, that hibernation is not enabled, but you have got 50, that it is not supported.

    That means, that you are missing some drivers, most likely ACPI power management driver, maybe chipset as well.

    Use Driver Easy Free to see, if it finds anything missing or outdated.
      My ComputerSystem Spec
  10.    29 Sep 2016 #10
    Join Date : Aug 2016
    Posts : 22
    Windows 10
    Thread Starter

    Quote Originally Posted by TairikuOkami View Post
    That is it, I have got a message 126, that hibernation is not enabled, but you have got 50, that it is not supported.

    That means, that you are missing some drivers, most likely ACPI power management driver, maybe chipset as well.

    Use Driver Easy Free to see, if it finds anything missing or outdated.
    Got 16 outdated drivers, no missing drivers, nothing power realated as far as I can see. Heres a list of the drivers being listed as outdated::

    Broadcomm Serial Bus Driver over UART Bus Enumerator
    Intel SST Audio Device
    Intel Dymanic Platfom and Thermal Framework Generic Particiant Driver
    Intel Trusted Execution Engine Interface
    Intel Integrated Sensor Solution
    Intel HID Event Filter
    HID Advanced Sensor Collection
    HID Advanced Sensor Collection v2
    Intel HD Graphics
    HID PCI Minidriver for ISS (x6)
      My ComputerSystem Spec

 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
powercfg and ps keeping my computer awake??
How do I stop the process nw.exe from keeping my computer from going to sleep. I know it's a powercfg command but I'm not sure of the options so any help would really be appreciated :) C:\WINDOWS\system32>powercfg -requests DISPLAY: None. ...
Performance & Maintenance
powercfg problem
I have a powershell script that calls powercfg -lastwake. Every now and then it will not return any data. The code below Checks the return value $wake for null. If null it calls powercfg again. The other day I checked the system and the $try...
General Support
Solved Fresh Windows 10 Install Won't Sleep w/ PowerCFG Configured
Hello Windows 10 Community, I'm currently in the process of finalizing my Windows 10 install by configuring all the little details I typically do, but for some reason I cannot get my computer to sleep after the specified time in the Control...
Software and Apps
Is there a Regedit to Disable/Enable a specific sound device?
I just got the Logitech G933 headset and I love it for the most part. One really annoying thing is that it seems everytime I boot my computer, to get my headset to work on Windows 10, I need to Disable/Enable my headset through the Recording...
Drivers and Hardware
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:40.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums