1. Joined : Jul 2016
    Posts : 22
    XP
       31 Jul 2016 #1

    Best way to clone a Windows Installation?


    Hi

    I'm not sure if this is the best place to ask, but considering a lot of people have cloned their Windows installations before an upgrade or a clean install, I thought I'd try!

    I noticed that on my 250gb ssd, there are 3 partitions relating to the one Windows installation (I had originally split the drive so the main partition would only be 50gb, but there are hidden partitions (RAW ~ 10gb) and system ~ 350mb. There's currently about 180gb unallocated.

    Rather than save the whole disk as an image, am I able to only save (selected) those relevant partitions? I use Clonezilla. Would Macrium Reflect Free offer this ability? Or would I just need to save those partitions individually?

    Thanks for any help.
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    UK
    Posts : 1,324
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)
       31 Jul 2016 #2

    Use Macrium Reflect Free and select the option Create an image of the partitions required to backup & restore Windows. You can select the option to image individual partitions if you know what you are doing. Imaging is preferred to cloning to avoid having two disks connected to your PC with an identical disk signature.
      My System SpecsSystem Spec


  3. Joined : Jul 2016
    Posts : 22
    XP
       31 Jul 2016 #3

    Thanks Steve C.

    Guess that's what I was referring to earlier, saving an image to restore later. I assume cloning is used more for disk to disk copy?

    I intend to image the Windows partitions onto an external desktop drive, then restore from image to the same / another SSD.

    Thanks.
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    UK
    Posts : 1,324
    Windows 10 Home x64 (Laptop), Windows 10 Pro x64 (Desktop)
       31 Jul 2016 #4

    Use my first option to image your system partitions. Create a Macrium Reflect recovery drive. Then install your new drive, boot to the Macrium recovery drive and restore the saved image to your new drive. It's good practice to have only one drive connected when you first boot the new drive to avoid boot configuration problems.

    There are more tips in my guide here which you can adapt for your configuration http://www.eightforums.com/installat...s-hdd-ssd.html
      My System SpecsSystem Spec

  5.    01 Aug 2016 #5

    Clonezilla works really well.
      My System SpecsSystem Spec

  6.    02 Aug 2016 #6

    T0mmy1977 said: View Post
    Clonezilla works really well.
    Hi there.

    Clonezilla works (especially for Linux- although doesn't handle XFS format) - but an advantage with Macrium is that apart from being a zillion times faster is that you can load special drivers - great for a stand alone version if you need to load things like hardware RAID drivers at boot time, you can do windows boot repairs and you can restore to unlike hardware.

    Macrium actually can handle Linux xfs partitions but it takes a longish time as it's a sector by sector copy and you need to CLONE not IMAGE otherwise Linux won't boot until you re-install GRUB2 again and do some other recovery. Windows imaging is fast because Macrium can use "Intelligent copy". I've backed up Windows from internal SSD to external SSD in around 5 - 7 mins --roughly same time to restore -- data transfer rates approaching 1gb/s !!!.

    Note Clonezilla is really only a subset of the Linux DD command wrapped around with a GUI. There are much better ways of copying / imaging partitions than relying on DD which used to be known by Linux admins as "Disk Destroyer" !!.

    Cheers
    jimbo
      My System SpecsSystem Spec


  7. Joined : Sep 2015
    Ohio
    Posts : 7
    Win 10
       02 Aug 2016 #7

    I'm a big fan of the FOG Project. It's been growing leaps and bounds recently for support and features. It does more than just imaging too.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Windows 10 - Clone to SSD Will Not Boot
I have a Dell Latitude E6520 with a Seagate Momentus XT ST95005620AS HDD, i7 CPU, Nvidia NVS4200M dedicated graphics, and 16 Gigs RAM. It has run Windows 7, 64 bit for several years like a champ. I got the auto update to Windows 10 which...
Installation and Setup
Windows 10 won't boot after clone to SSD
Hi, I recently bought a new Dell Inspiron 7559 laptop, and installed an SSD in the computer's m.2 port. I then cloned the existing HD to the SSD, changed the SSD to the default boot in BIOS, and then re-formatted the HD. Everything worked fine...
General Support
windows 10 clone hard drive will no boot
Hi I cloned my hard drive a Seagate 2T to a WD 2T using acronics software I removed my Seagate drive and plugged in my WD drive in the same spot and system would not boot tried using windows 10 repair disk no luck plugged the Seagate drive back...
General Support
Clone Windows 10 threshold 2 to USB SSD NOT BOOTING
I have a Dell XPS8700 that came with Windows 8.1, which was upgraded to Windows 10 and upgraded again to threshold 2. I used Acronics True Image 2014 premium to backup my Drive C: partition on disk0 which was resized to 223 GB The remaining space...
Installation and Setup
Solved How can I clone Windows 10 to another PC's.
Hi, First, I have 20 laptops with Windows 8.1, i upgrade all to Windows 10. I add to one PC all softwares, tweaks and config Userprofile. My question is : Can i clone (with Acronis True Image 2016) ; this one PC to 19 others, and have...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:23.
Find Us
Twitter Facebook Google+



Windows 10 Forums