Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       18 Jun 2016 #11

    ICIT2LOL said: View Post
    Well I followed the instructions to zip the CBS log and saved it t desktop but it would attach the reply post.

    Now I know there is a problem because I have been trying to make a clone of the small drive to a larger one but get a blue screen (not BSOD) telling me there is a problem cloning the install and gives me an error code.

    Now again I am away from home but will try again tomorrow. If nothing works then I shall have to do the clean install again my only concern is that I have activated my Kaspersky AV on this drive and they may balk at letting me activate again on the larger drive the rest I am not worried about.
    Well John, you're just going to have to type everything in the CBS.log

    Nah, just kidding
    ... you could copy the text in the parsed log and paste it in a code box (the # on the posting menu)

    You could also try disabling Kaspersky.
    There were reported issues with Kaspersky 2015 not being compatible with Win10, but Kaspersky 2016 seems to work well with Win10.

    Bill
    .
      My System SpecsSystem Spec


  2. Joined : Jan 2014
    Central West NSW Australia
    Posts : 413
    7 and 10 on various machines
       18 Jun 2016 #12

    Ok Bill and yes I have 2016 KIS as I always upgrade as soon as the next version comes out - one can use the same activation code which is a plus at least. But I will disable it pro tem as well.
      My System SpecsSystem Spec


  3. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       18 Jun 2016 #13

    Disable it just as a test to see if it might be causing some of the issues on your machine.

    It should be relatively easy to figure out if that was causing problems.

    Disabled - no BSOD or other issues you reported (uploading the CBS zip folder...)
    Contact Kaspersky
    Run MS Defender until you get an answer

    Disabled - still have BSODs or other issues you reported (uploading the CBS zip folder...)
    Enable Kaspersky
    It wasn't causing the issue(s)

    Bill
    .
      My System SpecsSystem Spec


  4. Joined : Jan 2014
    Central West NSW Australia
    Posts : 413
    7 and 10 on various machines
       19 Jun 2016 #14

    Ok Bill I have no BSOD as such just a blue screen with a message. I will try and attach the CBS files again as it is only 1.86MB which to me it not that large.

    Edit this is with KIS disabled but it took a long time
    Errors is CBS logs Attached Files
      My System SpecsSystem Spec


  5. Joined : Jun 2015
    Posts : 10,903
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       19 Jun 2016 #15

    Trust me John, that is a lot of text and pretty large

    What SFC wants to do
    Code:
    The following actions will be performed:
        Regeneration Candidates: 0
        Removal Candidates: 325
        Superseded/LDR (Delta Compression) Candidates: 1037
        Null-Delta Compression Candidates: 
            Mutable file Candidates: 170
            Boot-Recovery Candidates: 91
        Deletion Candidates (Non Driver): 0
        Driver Deletion Candidates: 33
    What I see mainly
    Code:
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    2016-06-17 11:06:37, Warning               CBS    Current sub stage percentage lower than last sub stage percentage. [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
    Then there is 2 files that cannot be deleted for some reason
    Code:
    2016-06-17 11:36:01, Info                  CSI    0000154a Couldn't mark for pending delete: [l:38 ml:39]"\SystemRoot\WinSxS\Temp\PendingDeletes"\[l:44]"$$DeleteMe.sortkey.nlp.01d1c77ebc7739a6.0003".  Reason: [13]"Cannot Delete"
    2016-06-17 11:36:01, Info                  CSI    0000154b Couldn't mark for pending delete: [l:38 ml:39]"\SystemRoot\WinSxS\Temp\PendingDeletes"\[l:45]"$$DeleteMe.sorttbls.nlp.01d1c77ebc74d731.0002".  Reason: [13]"Cannot Delete"
    Honestly I haven't ever seen such a log, though I have not seen many CBS logs. What this all means I can't say.
      My System SpecsSystem Spec


  6. Joined : Jan 2014
    Central West NSW Australia
    Posts : 413
    7 and 10 on various machines
       19 Jun 2016 #16

    Ok Martijn the machine at the moment is running ok and the faster SSD I cloned to is three times as fast so I really cannot complain.

    If those files are not causing any issues then best left alone - my main concern was the activated AV because it is a hassle to contact Kaspersky in Melbourne and explain to them why I would need that activation back.

    But thanks for all the help from everyone.

    Oh the cloning problem I found was down to having the disk to be cloned to set as an MBR instead of a GPT disk is that makes any sense of what has gone on with that issue.
      My System SpecsSystem Spec


  7. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       19 Jun 2016 #17

    Methinks the SFC warnings are from the upgrade issues (Home > Pro) not sure. There are other instances where just the upgrade results in the same warnings.

    and Methinks the Pending Deletes are associated with language processing - I've seen SFC info msgs about language packs, which can be ignored.

    Insert the install media you just made from Techbench

    Note the drive letter - I'll use E: as an example, it might be a different letter on your machine.
    Just substitute the letter of the install media where I use E:

    Right click the Windows icon (aka Start button) on the Taskbar
    Select Command Prompt (Admin)

    Enter the following lines in the Command Prompt window:
    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\sources\install.wim:1 /limitaccess

    SFC /ScanNow
    Note: there are only two lines - the post wraps the Dism command.

    If there are any errors on the screen after the commands run,
    Navigate to C:\Windows\Logs
    Right click the CBS folder
    Select Send to > Compressed (zip) folder
    answer yes to place on Desktop
    Attach the zip folder to your next post

    Shutdown the machine, wait 2 minutes, then restart the machine.

    Full tutorials:
    Run DISM in Command Prompt
    Run SFC /ScanNOW in Command Prompt
      My System SpecsSystem Spec


  8. Joined : Jan 2014
    Central West NSW Australia
    Posts : 413
    7 and 10 on various machines
       19 Jun 2016 #18

    Well I'll try Bill the only problem is I used a DVD to install but I sdo have a stick all the same - burnt form the same ISO.
      My System SpecsSystem Spec


  9. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       20 Jun 2016 #19

    Either one will work - just substitute E: with the drive letter of the USB or DVD.

    One question John - is the ISO from Techbench or from the Media Creation Tool (MCT).
    If you downloaded from Techbench, the Dism parameters in post# 17 are what you need.

    I think you got it from Techbench, but want to be certain.

    Bill
    .
      My System SpecsSystem Spec


  10. Joined : Jan 2014
    Central West NSW Australia
    Posts : 413
    7 and 10 on various machines
       20 Jun 2016 #20

    Yes Bill got it from techbench I think I mentioned it before though that installing some of the windows in the tutorial never showed up - for example the one which asks if you want Home or Pro which happened an both of the other machines when I installed 10 on them

    Having said that those ISO's where made longer ago than the current one I have and the burn speed I use d back then was slower than what this ISO was burnt at.
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
Perflib errors 1008 and loadperf errors 3009
I recently installed Windows 10 using a clean install USB method as per MS's website. I have a repeating error since Dec 9 which is below. I have tried to search for a solution but in most cases it only covers windows servers or shared point. I have...
General Support
Windows 10: Constant BSOD errors, different errors each time. HELP!!!!
Hi my name is Peter I am new to this so please excuse any mistakes in posting this I might make. I have very recently built myself a new pc to game on. Once I put the system together and installed windows 10 almost immediately I got BSOD with a...
BSOD Crashes and Debugging
Service control manager errors never goes away Persisting errors zeez
You are about too read a bad english. and i am really sorry about it i am not native english speaker Just installed window 10 th2 and few other software didn't upgrade it just did a clean install of it but service control manger errors never...
General Support
Windows logs automatically logs into last user
I just upgraded my PC to windows 10 and have already seen my first issue. I have two user accounts on my computer. Neither of them have passwords. In Windows 7 it would load up windows and give me the option to select the user I want to sign into....
User Accounts and Family Safety
Logs
Where should I look for a log file regarding a failed 8.1 to 10 upgrade. I can't even repair the installation. Every attempt gives :( .... CRITICAL_SERVICE_FAILED and goes into troubleshoot mode. Thank you. Jon
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:43.
Find Us
Twitter Facebook Google+



Windows 10 Forums