Windows 10: SFC can't fix corrupted files Solved

Page 1 of 2 12 LastLast
  1.    02 Jun 2016 #1

    SFC can't fix corrupted files


    I just got this problem where windows search does not function (I do not have cortana, using dutch windows). So i thaught i could fix it with SFC /scannow. But with this scan came the message

    "Windows Resource Protection found corrupt files but was unable to fix someof them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
    example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
    supported in offline servicing scenarios."

    The results are found here. But i do not understand them enough to see what the problem is, and how i can fix it. So I hope you guys are able to give me some advice on how to fix those corrupted files and hopefully so fix my windows search.

    I searched the internet for some advice, there i found this command "dism /online /cleanup-image /restorehealth" But this did not work, asked for a image source.

    To summon up:
    What should i do to fix my corrupted files and fix my windows search (Restarting search.exe in the task manager did nothing)
      My ComputerSystem Spec

  2. davidhk's Avatar
    Posts : 4,765
    windows 10 Home threshold2
       02 Jun 2016 #2

    Use this method when your sfc /scannow reports corrupt files found but unable to repair :

    In the same Command Prompt (Admin) windows, copy and paste this command...........

    dism /online /cleanup-image /restorehealth

    > press Enter.
    Again it will take some time.
    When finished, it will give you a report.


    If your dism report " Source files could not be found ", don't panic. There is a solution for that.
    Just post back.
      My ComputerSystem Spec

  3.    02 Jun 2016 #3

    After running the line as administrator, i am getting this:

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0


    Image Version: 10.0.10586.0


    [==========================100.0%==========================]


    Error: 0x800f081f


    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.


    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
      My ComputerSystem Spec

  4. davidhk's Avatar
    Posts : 4,765
    windows 10 Home threshold2
       02 Jun 2016 #4

    Ok. Please make sure you follow these instructions to the letter.

    Use the Tech Bench link below to download your version of Windows 10.
    http://www.microsoft.com/en-us/softw...load/techbench
    Make sure you select the same Edition, Language and bit version your computer is now running.

    Once you have the iso downloaded, right click at the ISO > click Mount > leave it there.

    Then open the elevated command prompt and copy and paste this................

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:H:\sources\install.wim:1 /limitaccess

    Note : H is the drive where the iso is mounted. Change it if your driver letter is different.

    When it is completed, you should get the report that the operation is successful.
    Now run the sfc /scannow again. It should be ok this time.
      My ComputerSystem Spec

  5.    02 Jun 2016 #5

    Thank you the errors en corrupted files are gone!
    Only I'm still not able to search, do you know how to fix that.

    What i found was troubleshooting "search and indexing", but the troubleshooter did not find anything. The next thing i found was restarting search.exe from the task manager. Sadly this does not fix the issue, and search.exe is mostly not findable in the task manger, only when you just searched something.

    You got any ideas on how to fix this?
      My ComputerSystem Spec

  6. davidhk's Avatar
    Posts : 4,765
    windows 10 Home threshold2
       02 Jun 2016 #6

    Sorry.
    I don't have an answer for you about your "search" problem.
    I am sure someone will come along to help you out.
    Good luck.
      My ComputerSystem Spec

  7. davidhk's Avatar
    Posts : 4,765
    windows 10 Home threshold2
       02 Jun 2016 #7

    On second thought, maybe a Repair Install will be able to fix that.

    You already have the ISO downloaded and saved in your computer. Yes ?
    Go to the location where your iso file is stored > RIGHT click at it > click Mount > click Setup.exe.
    Installation will begin.
    You will be able to keep all your files, settings and apps.
    No product key is required.
    Activation will be automatic.

    Please do that and see if search is fixed.
      My ComputerSystem Spec

  8.    02 Jun 2016 #8

    Thank you anyway, you helped a lot ;D. I am going to continue the search tomorrow. but will keep this post updated
      My ComputerSystem Spec

  9. davidhk's Avatar
    Posts : 4,765
    windows 10 Home threshold2
       02 Jun 2016 #9

    lukelumia950XL said: View Post
    Thank you anyway, you helped a lot ;D. I am going to continue the search tomorrow. but will keep this post updated
    Did you see my last reply, post #7 ?
    It's about doing a Repair Install.
    Take a look again.
      My ComputerSystem Spec

  10.    03 Jun 2016 #10

    I did not, as soon as i get home i will try it. Sounds like a reinstall of the windows folder. But I will try it when I get home
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Solved sfc - corrupted files but could not fix them. in Performance & Maintenance
Hi, This is a fresh install of Windows 10 and when i run sfc/scan now i get the message that there is corrupt files. Ive done a reset and a in Place upgrade both which failed to fix the problems. I've ran some commands in command promt, can't...
I notice that after i run these commands in powershell or cmd: sfc /scannow, DISM /Online /Cleanup-Image /RestoreHealth, Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}...
Solved SFC /scannow with corrupted files in Performance & Maintenance
Hi Roomies, After a clean install and running Win 10-pro-64-10586.36 I'm getting this error. 58062 Any quick help will be appreciated. I don't know what other test or fixer to run. Thank you.
I've just built a completely fresh installation of the latest build of Win 10 Pro x64 (10586.3, also referred to as 1511). I've done the necessary apps installs, software configuration and ended up with running SFC scan, which suggested my...
Hello. For quite a while, my computer had slow boot up and shutdown times and I searched online that sfc /scannow could probably help. I've tried every method regarding sfc /scannow and nothing worked. I've also included a CBS Log file to help me...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:42.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums