Page 3 of 5 FirstFirst 12345 LastLast
  1.    23 Feb 2016 #21
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Quote Originally Posted by Maty View Post
    I was just looking at the device manager and there were a couple of drivers not up to date, so I'm going through all and checking every single one of them. Is there a faster way of updating all of your computers drivers or checking to see if they're out of date? The only way I know is by right click and Update Driver Software, or downloading one of those thousands of "boost your computer" speed stuff that will say they will update drivers, do any of those actually work?

    And I can't tell where the beep is coming from. When it beeps it finally shuts off completely, I thought it was part of the computer shutting down, sounding a beep to let you know it's off. It's an Asus n550jv, I can't find anything on a "beep" when shutting off.
    No do not use any third party driver update software as it will do more harm then good. Told you before if you checked with ASUS as i see that as the listed manufacturer of your PC in your specs here for updated drivers. Let me look at what is available, not going get a boost in performance by updating drivers, would say proper performance with right drivers, truthfully find at times some drivers cause issue as it can be with you and yours. Did PC always beep when shutting down even with other operating system ? Is it loud or more then one beep ? Sometimes what sounds like a beep may npot be one only you can tell, just maybe certain devices powering down.
      My ComputerSystem Spec
  2.    23 Feb 2016 #22
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Sorry somehow i assumed this was a Desktop PC as i did not notice for one laptop listed in specs and graphics card to realize it was one.
    These ASUS i believe have all there drivers in this ATKPackage (For Windows 10 Upgrade), if you used this dated one you are fine, there are some other updated drivers for other devices you can update or use if needed. Do not worry about BIOS update as of yet.
    https://www.asus.com/Notebooks/N550J...Desk_Download/

    Knowing it is a Laptop changes some thoughts on this issue a bit.
      My ComputerSystem Spec
  3.    23 Feb 2016 #23
    Join Date : Feb 2016
    Posts : 21
    Windows 10 Home
    Thread Starter

    As far as I was concerned all of the drivers were up to date. The main one that updated was the Intel HD 4600. Then there were a bluetooth driver, some Radio Wireless Control, and other less common drivers. When I first upgraded to Windows 10, I went to the Asus website itself and downloaded the drivers from there directly because the touchpad was having issues. After that everything worked like a charm.

    I'm not sure if the beep happened before, I can't remember a time without a beep but then again this has been happening for quite some time.

    After updating drivers, removing old stuff, cleaning it a bit, it's gotten a lot quicker but it still takes some time. It goes to the black screen a lot quicker but then takes a few minutes to beep and shut off the power. I then checked the system even viewer and only got 5 errors (woo!).

    The following errors:
    1 of them was the same distributedCOM error

    4 Service Control Managers error:
    - User Data Access_70bec2 service terminated unexpectedly
    - User Data Storage_70bec2 service terminated unexpectedly
    - Contact Data_bec2 service terminated unexpectedly
    - Sync Host_bec2 service terminated unexpectedly

    The 4 service control manager errors have the exact same time stamp and event ID 7031. The distributedCOM has event ID 10016.
      My ComputerSystem Spec
  4.    23 Feb 2016 #24
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Quote Originally Posted by Maty View Post
    As far as I was concerned all of the drivers were up to date. The main one that updated was the Intel HD 4600. Then there were a bluetooth driver, some Radio Wireless Control, and other less common drivers. When I first upgraded to Windows 10, I went to the Asus website itself and downloaded the drivers from there directly because the touchpad was having issues. After that everything worked like a charm.

    I'm not sure if the beep happened before, I can't remember a time without a beep but then again this has been happening for quite some time.

    After updating drivers, removing old stuff, cleaning it a bit, it's gotten a lot quicker but it still takes some time. It goes to the black screen a lot quicker but then takes a few minutes to beep and shut off the power. I then checked the system even viewer and only got 5 errors (woo!).

    The following errors:
    1 of them was the same distributedCOM error

    4 Service Control Managers error:
    - User Data Access_70bec2 service terminated unexpectedly
    - User Data Storage_70bec2 service terminated unexpectedly
    - Contact Data_bec2 service terminated unexpectedly
    - Sync Host_bec2 service terminated unexpectedly

    The 4 service control manager errors have the exact same time stamp and event ID 7031. The distributedCOM has event ID 10016.

    Read my link above this one. I get a lot of Event viewer warnings and errors i believe a lot are due to Windows 10 especially Distribution Com one, be concerned for certain critical marked errors and which critical or errors they are. Have to check the other ones you did list, as data access has me wondering. If go to the right on Event Viewer and use copy and paste put into a notepad be able see more details.
      My ComputerSystem Spec
  5.    23 Feb 2016 #25
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Find those exact event viewer warnings or errors here with others, possibly from some software and or a microsoft issue
    https://www.tenforums.com/general-dis...lp-needed.html

    Specs how NVIDIA Display Adapter, then tell me Intel HD
      My ComputerSystem Spec
  6.    23 Feb 2016 #26
    Join Date : Feb 2016
    Posts : 21
    Windows 10 Home
    Thread Starter

    I had the ATK package. I followed your link just to be sure and when i ran the setup it only had a repair and uninstall option, so I went with the repair, everything went smoothly.

    Here is the Data Access underneath. I've seen a Font Cache 3.0.0.0 error, SQLEXPRESS error, and a Winnit. Not sure if those mean anything.

    Log Name: System
    Source: Service Control Manager
    Date: 2/23/2016 7:23:16 PM
    Event ID: 7031
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: Maty-PC
    Description:
    The User Data Access_83c2fe service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7031</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2016-02-24T00:23:16.356788500Z" />
    <EventRecordID>12364</EventRecordID>
    <Correlation />
    <Execution ProcessID="904" ThreadID="2496" />
    <Channel>System</Channel>
    <Computer>Maty-PC</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">User Data Access_83c2fe</Data>
    <Data Name="param2">1</Data>
    <Data Name="param3">10000</Data>
    <Data Name="param4">1</Data>
    <Data Name="param5">Restart the service</Data>
    <Binary>550073006500720044006100740061005300760063005F003800330063003200660065000000</Binary>
    </EventData>
    </Event>
      My ComputerSystem Spec
  7.    23 Feb 2016 #27
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Assume one graphics was integrated https://www.asus.com/Notebooks/N550JV/specifications/

    Take a look at link in my last post about event viewer.
      My ComputerSystem Spec
  8.    23 Feb 2016 #28
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Quote Originally Posted by Maty View Post
    I had the ATK package. I followed your link just to be sure and when i ran the setup it only had a repair and uninstall option, so I went with the repair, everything went smoothly.

    Here is the Data Access underneath. I've seen a Font Cache 3.0.0.0 error, SQLEXPRESS error, and a Winnit. Not sure if those mean anything.

    Log Name: System
    Source: Service Control Manager
    Date: 2/23/2016 7:23:16 PM
    Event ID: 7031
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: Maty-PC
    Description:
    The User Data Access_83c2fe service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7031</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2016-02-24T00:23:16.356788500Z" />
    <EventRecordID>12364</EventRecordID>
    <Correlation />
    <Execution ProcessID="904" ThreadID="2496" />
    <Channel>System</Channel>
    <Computer>Maty-PC</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">User Data Access_83c2fe</Data>
    <Data Name="param2">1</Data>
    <Data Name="param3">10000</Data>
    <Data Name="param4">1</Data>
    <Data Name="param5">Restart the service</Data>
    <Binary>550073006500720044006100740061005300760063005F003800330063003200660065000000</Binary>
    </EventData>
    </Event>
    Repair or uninstall options meant they were already in there, it's o.k. it only ends up overwriting them.

    Error just stating it shutdown unexpectedly, why, i am not sure. Not sure has anything to do with your slowness on this laptop.
      My ComputerSystem Spec
  9.    23 Feb 2016 #29
    Join Date : Feb 2016
    Posts : 21
    Windows 10 Home
    Thread Starter

    I'll read through that entire post on those 4 service control manager services tomorrow. Those 4 errors I got on this last shutdown. Usually there is a timeout error with Font Cache and SQLEXPRESS.
      My ComputerSystem Spec
  10.    23 Feb 2016 #30
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Quote Originally Posted by Maty View Post
    I'll read through that entire post on those 4 service control manager services tomorrow. Those 4 errors I got on this last shutdown. Usually there is a timeout error with Font Cache and SQLEXPRESS.
    Mean not getting any BSOD's ? Hard to determine some causes of these errors and how and if there are even actually related to your issue or some other even though they show up now. If these errors are that serious you may get a BSOD and will create a minidump file which will then be able to analyze and debug.

    Can try a System file checker to make sure you have no file corruption.
    At Admin command prompt copy and paste this, then press enter let it finish

    sfc /scannow

    Same open command prompt copy and paste this press enter, let it finish

    Dism /Online /Cleanup-Image /RestoreHealth

    reboot after they are both done.
      My ComputerSystem Spec

 
Page 3 of 5 FirstFirst 12345 LastLast


Similar Threads
Thread Forum
Solved Slow boot time on SSD and slow Desktop icons loading
Hi all, I'm using an Intel SSD 240GB 520 series. Always loading very fast, i.e., about 8 seconds from cold boot. Since windows 10 is installed, boot time is about 20 seconds and desktop icons take some time to refresh and load their images. ...
Performance & Maintenance
How to shut off or slow down pointer:hover-event response time .
Hello & Thanks , The hover-event response time is too fast , and it triggers unwanted events . Pls , how can i shut off the hover-event response(preferably) or drastically slow it down ? Thanks...Vern
Installation and Upgrade
Solved Windows was not shut down properly but I did shut it down properly!
Since upgrading to Windows 10 Pro, I remain perplexed about this one issue that is plaguing my system: Almost every shut down is reported in the Windows 10 Reliability Monitor as the computer was not shut down properly. This happens on both shut...
General Support
Fan still running after shut lid and shut down
Hey guys, I have noticed this problem come up on my Dell 7537 (Check out my profile for details) when I close the lid to put the computer to sleep, the HDD light turns off, but the fan continues to run, even after several hours. When I open the...
General Support
Shut down, Start up time slow. Performance faster than Win7.
Two days back I just upgraded from Windows 7 Pro to Windows 10 Pro build 10240 RTM. I observed that while performance wise Win10 is faster than Win7, it is much slower than Win7 during shut down and start. During shut down it takes at least 5-10...
Performance & Maintenance
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 01:59.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums