I installed the Windows 10 Technical Preview yesterday, and at the end of the day, it froze up. I shut down the system and turned it back on this morning, finding the OS stuck in the infamous "Automatic Repair Loop." I ended up having to install a fresh version of Windows 10 again. Does anyone have any advice if this happens again in the future?
r4zrbl4de
I got caught in the Win 10 reset loop. It seems as if there a bunch of these loops to get stuck in. Basically Windows 10 is saying that it has encountered a problem and it has no clue how to resolve it. So it puts a small file on the hard drive telling it to keep looping until the answer is found.
I don't know what issues cause the problem but my solution is that just as soon as the install is over, have Windows 10 make a complete system image on a USB drive( it will be about 25+ GB) Then make sure you have a Windows 10 or 7 boot disc. Once that is finished you can finish adding all of your games and programs. Get it just the way you like it but don't take too much time. Then get a small hard drive and put it in your computer and boot up again. Then use Acronis 15 ( 14 and earlier editions won't work on win 10) and clone your freshly tuned system to the spare hard drive. So now if everything goes to hell you can first use the boot disc and restore from the image or just boot from the cloned drive. You can put the original drive that has the looping problem into a usb case and delete it then reformat. Then you can clone back to the original drive if you want
Hi, I'm 'glad' to see someone else reporting this experience- thought I was on my own.
Here's my 'nasty' fix.. it's horrible.
Just as the PC restarts, pull out the power cord/switch off. Cold boot (press power switch, wait, switch on/reconnect power cord, restart).
That's the only (quick) way I've found in Win 8.1 and Win 10 when this automatic repair sequence was added to restore the normal boot sequence. I'd be interested to know if it works for you.
(I get into the restart loop if I experience a thermal cutout when sthg unusual is happening for long enough)
(And yes, use disk imaging!).
dalchina
I've done 6 of the upgrades now and that is the first time that the loop monster has struck. Mine was different from yours in that mine kept saying that the boot drive was not available and occurred after I tried to reset (aka- clean install). I am 100% sure that the small file that I found was causing the loop and also sure that it would still be there if not deleted in the reformat. In my case my best guess is that the loop started because of a pci card used to add sata ports. After I deleted the file, I stripped the pc down removing that card and a pcie video card so it just had the on board graphics. After making a system Image, I put the video card in and it installed fine. When I put the sata card in it showed a yellow check in device manager and said that resources were not available. After I rebooted the machine took a couple of seconds longer to boot but the yellow check was gone and the card works. So the system was able to readjust the resources after looking at all of the other devices. So Win 10 can repair it self at least in some situations. That is different from Win 7 and previous systems. In previous systems you would often end up with 5 or 6 devices with yellow checks where Win 10 is designed to find those problems and correct before finishing the install.
Quote