1.    04 Jan 2016 #1
    Join Date : Jan 2016
    Posts : 4
    Windows 10 Pro

    SFC Error


    Hello,

    Recently my PC has rebooted randomly, and then it couldn't find boot device, so I reseated my SATA and power cables going to the HDD. It seemed fine, but SFC found corrupt files. I can't fix this error.

    Tried:
    • sfc /scannow

    Result: Windows Resource Protection found corrupt files but was unable to fix some of them.

    • Dism /Online /Cleanup-Image /ScanHealth

    Result: The component store is repairable. The operation completed successfully.

    • Dism /Online /Cleanup-Image /RestoreHealth

    Result: The source files could not be found.

    • Dism /Online /Cleanup-Image /RestoreHealth /Source

    ​Result: Error: 0x800f081f

    I also attached a DISM log.

    Any help would be appreciated.
    SFC Error Attached Files
      My ComputerSystem Spec
  2.    04 Jan 2016 #2
    Join Date : Jan 2016
    Henderson
    Posts : 147
    Windows 10 Pro

    Go to #6 and run the dism command using the techbench iso as your source...fixes everything!!! you will need to mount the iso and use that drive as your source. https://www.tenforums.com/tutorials/7...-10-image.html


    Quote Originally Posted by Peterson311 View Post
    Hello,

    Recently my PC has rebooted randomly, and then it couldn't find boot device, so I reseated my SATA and power cables going to the HDD. It seemed fine, but SFC found corrupt files. I can't fix this error.

    Tried:
    • sfc /scannow

    Result: Windows Resource Protection found corrupt files but was unable to fix some of them.

    • Dism /Online /Cleanup-Image /ScanHealth

    Result: The component store is repairable. The operation completed successfully.

    • Dism /Online /Cleanup-Image /RestoreHealth

    Result: The source files could not be found.

    • Dism /Online /Cleanup-Image /RestoreHealth /Source

    ​Result: Error: 0x800f081f

    I also attached a DISM log.

    Any help would be appreciated.
    Last edited by AnEdge; 04 Jan 2016 at 22:53.
      My ComputerSystem Spec
  3.    04 Jan 2016 #3
    Join Date : Jan 2016
    Henderson
    Posts : 147
    Windows 10 Pro

    Quote Originally Posted by Peterson311 View Post
    Hello,

    Recently my PC has rebooted randomly, and then it couldn't find boot device, so I reseated my SATA and power cables going to the HDD. It seemed fine, but SFC found corrupt files. I can't fix this error.

    Tried:
    • sfc /scannow

    Result: Windows Resource Protection found corrupt files but was unable to fix some of them.

    • Dism /Online /Cleanup-Image /ScanHealth

    Result: The component store is repairable. The operation completed successfully.

    • Dism /Online /Cleanup-Image /RestoreHealth

    Result: The source files could not be found.

    • Dism /Online /Cleanup-Image /RestoreHealth /Source

    ​Result: Error: 0x800f081f

    I also attached a DISM log.

    Any help would be appreciated.

    Do it this way, the mounted ISO will be your source files!!

    Download the Techbench ISO go thru the prompts and hit Save (it will be in your download file). Right click on that file and at the top it will say mount. Click on that. Go to This PC and you will see the file with a checkmark and a drive letter. This confirms it was mounted. Make a note of the drive letter associated with that mount.

    Next, run this command ( make sure you use admin command), where /Source:wim:d: change d to your drive letter that you mounted then hit enter. Copy and paste.

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:d:\sources\install.wim:1 /limitaccess

    It will stay at 20% for a while and then say it was completed successfully

    Next you need to run the sfc/scannow command and it will repair your files.

    You cant download the iso file from the mct tool, it has to be from Techbench and it has to be the same build your trying to repair

    Please let me know how it goes, you can go back to the mount later and hit eject and it will dismount.
    Last edited by AnEdge; 04 Jan 2016 at 23:03.
      My ComputerSystem Spec
  4.    05 Jan 2016 #4
    Join Date : Jan 2016
    Posts : 4
    Windows 10 Pro
    Thread Starter

    Wow! Finally, thanks for helping me out! Guess the problem was the iso file I used, thanks for pointing out the TechBench one.

    Have a great day!
      My ComputerSystem Spec
  5.    05 Jan 2016 #5
    Join Date : Jan 2016
    Posts : 4
    Windows 10 Pro
    Thread Starter

    Nevermind, it looks like sfc still couldn't fix the issue, but DISM was successful
      My ComputerSystem Spec
  6.    05 Jan 2016 #6
    Join Date : Jan 2016
    Henderson
    Posts : 147
    Windows 10 Pro

    At the end of the dism cbs log (follow the path) there is a small paragraph of what it fixed or the corruption it fixed...the cbs log is very long. Its near the bottom and will tell you how many items it fixed. Copy and paste it and send it back.

    Also you may need to run the sfc/scannow a few times to fix the problem. Try that first...Let me know


    Quote Originally Posted by Peterson311 View Post
    Nevermind, it looks like sfc still couldn't fix the issue, but DISM was successful
      My ComputerSystem Spec
  7.    05 Jan 2016 #7
    Join Date : Jan 2016
    Henderson
    Posts : 147
    Windows 10 Pro

    Ok, get that downloaded ISO from that Techbench file and burn it to a disc or stick (right click on the file ). Make sure your bios is set to boot from whatever you transferred it to. Reboot to the ISO file we just created and keep running the prompts until it says install and keep all files and apps (the top one). It is just like an in place upgrade. You will lose nothing at all, don't worry. Reinstall windows 10 this way (and every other time they come out with a new build). It will take a while, go get a beer or two. Let it reinstall and don't touch anything. Your system should work fine again. Run an sfc scan after the fresh install. Let me know how it works.


    Quote Originally Posted by Peterson311 View Post
    Nevermind, it looks like sfc still couldn't fix the issue, but DISM was successful
      My ComputerSystem Spec
  8.    05 Jan 2016 #8
    Join Date : Jan 2016
    Posts : 4
    Windows 10 Pro
    Thread Starter

    In the CBS log it seemed that everything was fixed. I ran SFC again, and... Hurray! Found no integrity violations.
    Thanks for your help!
      My ComputerSystem Spec
  9.    05 Jan 2016 #9
    Join Date : Jan 2016
    Henderson
    Posts : 147
    Windows 10 Pro

    That made my whole day!!! glad to help, that's what the forums are all about.
    Remember to go to windows update (being you have pro version), advanced settings and make sure to defer upgrades.
    When a new build comes out, wait to see if there are problems and if not, download the latest version from Techbench and reinstall Windows using the latest ISO, Naturally keep all settings and apps. That's the only way to avoid problems. And also if you have room on your system keep the downloaded ISO handy to fix sfc and dism problems if they arise. you can lay money that they will!! Wish you the best JD




    Quote Originally Posted by Peterson311 View Post
    In the CBS log it seemed that everything was fixed. I ran SFC again, and... Hurray! Found no integrity violations.
    Thanks for your help!
    Last edited by AnEdge; 05 Jan 2016 at 19:04.
      My ComputerSystem Spec
  10.    07 Jan 2016 #10
    Join Date : Jan 2016
    Henderson
    Posts : 147
    Windows 10 Pro

    Quote Originally Posted by Peterson311 View Post
    In the CBS log it seemed that everything was fixed. I ran SFC again, and... Hurray! Found no integrity violations.
    Thanks for your help!

    And wouldn't you know, I ran an sfc scan again and found corrupt files again!! This is why you keep that ISO around to fix the crap that keeps happening. I hope Intel and MSFT address these graphics issues soon.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
How resolve error 16393, BITS Error code: 0x80004005 I'net Gateway?
anyone run this one before? I am not currently using a WIFI device. Error 16393 Log Name: System Source: Microsoft-Windows-Bits-Client Date: 12/8/2015 3:05:05 PM Event ID: 16393 Task Category: None Level: ...
Network and Sharing
Backup fails with a 'device error' code 0x8078012D/disk read error
During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E': 'The backup operation that started at...
Backup and Restore
Solved error message during user account signin critical error
Hello whenever I sign in to my user account I get a blue window with a critical error message......saying Start menu and cortana aren't working ( I have cortana turns off in options anyway ) then it says we will try and fix it next time you sign...
User Accounts and Family Safety
Persistent SMART error on cloned drives (Error code: 2000-0151)
I am on my 4th SSD in my Windows 10 laptop that has been getting SMART error 2000-0151. We have replaced the motherboard, the SSD, and the connector cable between the SSD and motherboard. One thing is that I've been using Macrium Reflect to clone...
Drivers and Hardware
Upgrade from 7: Update Error Code 80200053, & MediaCreationTool error
http://puu.sh/jj8wQ/4cad6d8add.png I have tried what I believe to be everything at this point. Clearing out the update download folder and retrying the update does not help whatsoever. Forcing the update through a command prompt just gets the...
Windows Updates and Activation
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:05.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums