Page 1 of 8 123 ... LastLast
  1.    01 Jan 2016 #1
    Join Date : Jan 2016
    Posts : 9
    windows 10 pro

    Unable to repair Windows10 using SFC/DISM or in-place upgrade


    Hello,

    Once in awhile I check my system files using SFC,
    I just checked it but found problems and wasn't able to fix them.
    So I ran the DISM command but then again couldn't fix it.
    Code:
    DISM /Online /Cleanup-Image /restorehealth
    The DISM command gave me this message:
    "Error: 0x800f081f
    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
    So I downloaded an ISO with the same version and build as my current OS (windows 10 pro x64 - build 10586) to use the option "Source" by mounting the ISO.
    But same error as mentioned above showed up.

    So my last idea was to do a in-place upgrade , and I did by following this tutorial of yours, it all went smoothly but after the in-place upgrade finished it seems nothing had change since the SFC found problems.

    Im out of ideas here.

    Attached, CBS and DISM logs.
    Unable to repair Windows10 using SFC/DISM or in-place upgrade Attached Files
      My ComputerSystem Spec
  2.    01 Jan 2016 #2
    Join Date : Jun 2015
    N.Y.
    Posts : 3,067
    Windows 10 Pro 64 bit

    Any chance you have a NVIDIA Graphics card ?
      My ComputerSystem Spec
  3.    01 Jan 2016 #3
    Join Date : Aug 2015
    Penn's Woods
    Posts : 1,182
    Windows 10 Home

    Downloaded Iso from where? Downloaded from Tech Bench will result in an install.wim file in the sources folder to use as source. If you used Media Creation Tool to download the iso, it will have an install.esd in the sources folders instead and THAT doesn't work well as /source for DISM restore health.
      My ComputerSystem Spec
  4.    01 Jan 2016 #4
    Join Date : Jun 2015
    N.Y.
    Posts : 3,067
    Windows 10 Pro 64 bit

    Quote Originally Posted by Word Man View Post
    Downloaded Iso from where? Downloaded from Tech Bench will result in an install.wim file in the sources folder to use as source. If you used Media Creation Tool to download the iso, it will have an install.esd in the sources folders instead and THAT doesn't work well as /source for DISM restore health.
    Then like Post #6 here from Topgundcp SFC some corrupt files can not be fixed

    Maybe related to NVIDIA Driver.
      My ComputerSystem Spec
  5.    01 Jan 2016 #5
    Join Date : Aug 2015
    Maine
    Posts : 36,648
    Windows10Pro 64Bit

    Looking at his CBS log, one of his errors IS Opencl.dll which SFC could not repair. But, that does seem strange because after running SFC /Scannow, most of the time it DOES repair that file, with the older one from MS.
      My ComputersSystem Spec
  6.    01 Jan 2016 #6
    Join Date : Jun 2015
    N.Y.
    Posts : 3,067
    Windows 10 Pro 64 bit

    I did have a similar issue myself at first as thread starter with this as from my last link, worth try along with downloading the correct ISO from techbench and try.
      My ComputerSystem Spec
  7.    01 Jan 2016 #7
    Join Date : Aug 2015
    Maine
    Posts : 36,648
    Windows10Pro 64Bit

    Quote Originally Posted by jds63 View Post
    I did have a similar issue myself at first as thread starter with this as from my last link, worth try along with downloading the correct ISO from techbench and try.
    Yup, your right, as Topgun's way does work, just have to follow it correctly.
      My ComputersSystem Spec
  8.    01 Jan 2016 #8
    Join Date : Jan 2016
    Posts : 9
    windows 10 pro
    Thread Starter

    Quote Originally Posted by jds63 View Post
    Any chance you have a NVIDIA Graphics card ?
    Yes I do have one! can I ask why is that relevant?
      My ComputerSystem Spec
  9.    01 Jan 2016 #9
    Join Date : Jan 2016
    Posts : 9
    windows 10 pro
    Thread Starter

    Quote Originally Posted by OldMike65 View Post
    Yup, your right, as Topgun's way does work, just have to follow it correctly.
    So my only issue allegedly was not downloading the ISO from Tech Bench ?
      My ComputerSystem Spec
  10.    01 Jan 2016 #10
    Join Date : Nov 2015
    Posts : 4,814
    windows 10 Home threshold2

    dippas,

    My reply is just to elaborate what Word Man has already told you in Post #3.
    Your dism .......> restorehealth said " source files could not be found" because your ISO was downloaded from Media Creation Tool which gave you the Install.esd.
    You need the Install.wim which can be obtained by downloading the ISO from Tech Bench.
    http://www.microsoft.com/en-us/softw...load/techbench

    Once you have the iso downloaded, right click at the ISO > click Mount >
    Then open the elevated command prompt and copy and paste this................

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:H:\sources\install.wim:1 /limitaccess

    Note : H is the drive where the iso is mounted. Change it if your driver letter is different.

    When it is completed, you should get the report that the operation is successful.
    Now run the sfc /scannow again. It should be ok this time.
      My ComputerSystem Spec

 
Page 1 of 8 123 ... LastLast


Similar Threads
Thread Forum
Installation & Upgrade Repair Install Windows 10 with an In-place Upgrade
How to Do a Repair Install of Windows 10 with an In-place Upgrade If you're having problems with Windows 10 on your PC, you could use push-button reset to refresh or reset Windows. Refresh your PC Fixes software problems by reinstalling the...
Tutorials
Performance & Maintenance Use DISM to Repair Windows 10 Image
How to Repair Windows 10 Image using DISM If a Windows image becomes unserviceable, you can use the Deployment Imaging and Servicing Management (DISM) tool to update the files and correct the problem. For example, you would use DISM to fix...
Tutorials
:( DISM (Error 0x800f081f) and SFC (Failed to Repair)
I was having some issues with Cortana on the recently released windows 10, so decided to run a SFC /Scan Now and DISM /Online /Cleanup-Image /restorehealth. DISM Failed with "Error: 0x800f081f The source files could not be found. ...
Performance & Maintenance
Solved Indexing Options vanished (after 10586 in place repair install?)
Hi, I don't use Windows search normally, but today had reason to look for Indexing Options in the CP. No sign. Yes, things are being indexed. Yes, the service is running. So could I invoke Indexing Options some other way? control.exe...
General Support
DISM Repair not working
I recently installed Windows 10 Pro 64-bit from an in-place upgrade. After doing so, I've been encountering numerous issues such as long login times and the Store not opening due to an error I'm getting which states "This app can't open." I've...
Performance & Maintenance
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:01.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums