Windows 10: SFC stops at 1%, DISM error 1392, dll error

Page 1 of 4 123 ... LastLast
  1.    12 Dec 2015 #1

    SFC stops at 1%, DISM error 1392, dll error


    Hello. After manually installing Threshold 2 AVG PC TuneUp reported errors on my C: disk, so I performed a chkdsk. The system rebooted, naturally, and chkdsk took a very long time, always stuck at the same percentage. CristalDiskInfo reports no error at all times. After the completion of chkdsk, after 9 hours or more, I got an error of mscorwks.dll (0xc0000020).

    I assume that either the filesystem or the physical disk are bad. So I try running a SFC, but it stops at 1% saying that it cannot perform the action. I try with DISM and it also stops near the beginning reporting error 1392.

    Any ideas on how can I proceed? I don't want to wipe my system

    EDIT: I just tried DISM toolkit from this forum, with the image mounting option, and also error 1392, file can't be read.

    Here's the log:
    dism.log
      My ComputerSystem Spec

  2. hTconeM9user's Avatar
    Posts : 2,678
    Windows 10x64 Home Version 1803 (Build 17134) 345
       12 Dec 2015 #2

    Someone else is having trouble with AVG PC Tune up.
    Try and disable it and see if you get that same error come up
    They tried to get rid off it but every time they did it came back
      My ComputerSystem Spec

  3.    12 Dec 2015 #3

    You're talking about uninstall TuneUp and run SFC again? I've never have a problem with TuneUp and SFC at the same time, I'm sorry but to me it doen't make any sense as I don't see how that can interfere, but I will try nevertheless.

    Thanks for the suggestion mate :)
      My ComputerSystem Spec

  4. hTconeM9user's Avatar
    Posts : 2,678
    Windows 10x64 Home Version 1803 (Build 17134) 345
       12 Dec 2015 #4

    eXtremeDevil said: View Post
    You're talking about uninstall TuneUp and run SFC again? I've never have a problem with TuneUp and SFC at the same time, I'm sorry but to me it doen't make any sense as I don't see how that can interfere, but I will try nevertheless.

    Thanks for the suggestion mate :)
    Yes only a suggestion but may help in your case, also they may not of updated to latest version yet and that is why you could be having trouble.
    Either Bing or Google PC Tune up and see what others have to say about it.
    I myself run Auslogics Boostspeed 8 and that has just been updated to latest version since TH2 was downloaded and gives me no trouble at all it is not free but in my mind it is well worth the money.
    Have it on all my systems as well as driver updater made by same firm
      My ComputerSystem Spec

  5. axe0's Avatar
    Posts : 13,725
    Windows 10 Pro
       12 Dec 2015 #5

    What DISM commands have you used outside of this toolkit?

    Please have a look at Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums

    hTconeM9user said: View Post
    Either Bing or Google PC Tune up and see what others have to say about it.
    I myself run Auslogics Boostspeed 8 and that has just been updated to latest version since TH2 was downloaded and gives me no trouble at all it is not free but in my mind it is well worth the money.
    Have it on all my systems as well as driver updater made by same firm
    You're not actually installing drivers from that program are you?
      My ComputersSystem Spec

  6. hTconeM9user's Avatar
    Posts : 2,678
    Windows 10x64 Home Version 1803 (Build 17134) 345
       12 Dec 2015 #6

    axe0 said: View Post
    What DISM commands have you used outside of this toolkit?

    Please have a look at Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums



    You're not actually installing drivers from that program are you?

    Yes I do and since I have I have not had any driver issues at all, before that I was always having driver trouble and some one from Microsoft Community forum and Bleeping Computers recommend it.
    Also certificated by Microsoft
      My ComputerSystem Spec

  7.    12 Dec 2015 #7

    I haven't done anything weird with TuneUp, I've been using it before it was AVG. I only use it to clean registry and things like that.
      My ComputerSystem Spec

  8. hTconeM9user's Avatar
    Posts : 2,678
    Windows 10x64 Home Version 1803 (Build 17134) 345
       12 Dec 2015 #8

    eXtremeDevil said: View Post
    I haven't done anything weird with TuneUp, I've been using it before it was AVG. I only use it to clean registry and things like that.
    Have you got the latest version of PC Tune UP
    Because if not up to date that may be causing your problem as well.

    You are I take trying to run SFC etc from command Prompt (Admin) as that is what you are suppose to use
      My ComputerSystem Spec

  9.    12 Dec 2015 #9

    Yes of course, SFC and DISM directly from CMD.
      My ComputerSystem Spec

  10. hTconeM9user's Avatar
    Posts : 2,678
    Windows 10x64 Home Version 1803 (Build 17134) 345
       12 Dec 2015 #10

    eXtremeDevil said: View Post
    Yes of course, SFC and DISM directly from CMD.
    Ok just checking as we have had some on another forum try without doing that.

    So disable or uninstall PC Tune up to see if you can now run both those commands.
    If you cant then try and run trouble shooter as that sometimes can find and repair the problem
      My ComputerSystem Spec


 
Page 1 of 4 123 ... LastLast

Related Threads
Error DISM restorehealth in Performance & Maintenance
Hello I use the Windows DVD 10 and option 3 with IMAGE_HEALTH and have an error 50: http://www.eightforums.com/performance-maintenance/68326-sfc-scannow-dism-restorehealth-repair-corrupt-files.html 0x800f081f and operation not fix !!
Hello, I've run into a problem where my windows apps will not open. Calc opens with a gray screen just showing the calculator logo...calendar opens to a blue screen only showing the calendar logo, etc. I can't run SFC /scannow due to error...
I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook. I run DISM and I got the following error message: 1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online...
DISM COMException Error in Performance & Maintenance
I've discovered a weird issue on Windows 10x64 10525 Any solution yet?
10130 - DISM error in General Support
Getting this error when running DISM after a clean install: Log file is available if anyone wants it. I looked at it but don't understand what it's saying.
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:47.
Find Us