Page 1 of 3 123 LastLast
  1.    29 Nov 2015 #1

    DISM and SFC

    I posted in the Win 8 forum but saw I should have posted here.
    I read the corrective material in Win 8 as to how to fix this missing or corrupted files issue but either it is over my level or it is too difficult for me.
    I have run both programs and rebooted. i have run in safe mode.
    I have system restore. Also I have an image of a clean install of Win 10 and one of the last big update.
    I have reset.
    I don't know if I should follow the difficult advice in Win 8 or use one of my options; if my options, what priority should I use?
    DISM and SFC Attached Files
      My ComputerSystem Spec

  2.    30 Nov 2015 #2

    Hi, I would suggest that since neither of those led to a satisfactory outcome, and since I have no information on the history of your problem, then
    1. Run chkdsk C: /F
    2. Get appropriate installation medium for Win 10
    3. Do an in-place repair install
    Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums

    Good luck!
      My ComputerSystem Spec

  3.    30 Nov 2015 #3

    follow the restorehealth link in my sig below..
    it is looking for a repair source files
      My ComputerSystem Spec

  4.    30 Nov 2015 #4

    I already did the process and chose number one. It said," Enjoy" as though it was successful b/c it said previously that it was repairable. SFC still did not work. Is a reboot necessary before I keep running SFC?
      My ComputerSystem Spec

  5.    30 Nov 2015 #5

    The program does not say "Enjoy" unless you chose option 0

    Press 0 - Quit and Exit program

    The preferred method of use would be to select

    Option 1 ScanHealth > if shows as repairable,
    Option 2 RestoreHealth > if shows as needing source file,
    Option 3 RestoreHealth /source
      My ComputerSystem Spec

  6.    30 Nov 2015 #6

    I chose 1 then 2 then 3. It said it found a missing file but then the source was an issue.
    I guess it is the traditional system restore, , image or reset. I have an image when I first did a clean install and another after the last big update.
    Do you have any advice?
      My ComputerSystem Spec

  7. essenbe's Avatar
    Posts : 11,602
    Windows 10 Pro and Windows 10 Pro Insider
       30 Nov 2015 #7

    Download the ISO from Techbench Tech Bench for the exact same version you have installed, mount the ISO file, by right clicking and select mount. Windows will give you a drive letter. Right click the start icon and select command prompt (Admin), copy/Paste this into the command window

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:D:\sources\install.wim:1 /limitaccess

    Use the letter assigned to your mounted ISO where I have 'D' in red.
      My ComputersSystem Spec

  8.    30 Nov 2015 #8

    I am curious; what happens to the integrity of the ISO disc I have for Win 10 Pro for future use if I use this if I use this?
      My ComputerSystem Spec

  9. essenbe's Avatar
    Posts : 11,602
    Windows 10 Pro and Windows 10 Pro Insider
       30 Nov 2015 #9

    Nothing. it will be fine. The error you received said it couldn't find the source, so you are going to give it a source. I really don't know, but it seems it will just copy the missing file from the source and paste it where it should be on your system.
      My ComputersSystem Spec

  10.    30 Nov 2015 #10

    I brought my post over from Win 8. The process said I found a missing file but there was an issue with the source - I think. I used 1,2 and 3. This is pretty hard for my skill level.
    Would I be better off using system restore, or an image - I have one of the clean install of Win 10 pro and one after the last big update, or reset. I do not know how to do a reset if it gets to that except to go to recover and find it there.
    I did not mean to snub essenbe but it is hard material of which I am unsure.
      My ComputerSystem Spec

Page 1 of 3 123 LastLast

Related Threads
Error DISM restorehealth in Performance & Maintenance
Hello I use the Windows DVD 10 and option 3 with IMAGE_HEALTH and have an error 50: http://www.eightforums.com/performance-maintenance/68326-sfc-scannow-dism-restorehealth-repair-corrupt-files.html 0x800f081f and operation not fix !!
Solved SFC not working and neither is DISM in Performance & Maintenance
Hey, I'm new here. Maybe I should start a new post, but let me just start here, as this thread is the closest to my problem that I can find. I have a very old laptop, but despite the age it has worked relatively fine for my needs with just an...
DISM Repair not working in Performance & Maintenance
I recently installed Windows 10 Pro 64-bit from an in-place upgrade. After doing so, I've been encountering numerous issues such as long login times and the Store not opening due to an error I'm getting which states "This app can't open." I've...
Solved Advice on errors the SFC and DISM can not fix in Performance & Maintenance
I have a Dell XPS 8700 with a clean install of WIN10 that has been running without errors since early August. Yesterday I decided to run SFC /scannow to see if everything was OK. It reported that the file "Microsoft.PowerShell.Host.psd1" needed to...
hi , to be quick. here some sample: 2015-09-25 05:10:49, Warning DISM DISM Provider Store: PID=2096 TID=4700 Failed to Load the provider: C:\Users\BAYUST~1\AppData\Local\Temp\9F7181ED-2803-42FA-A84C-DF0C2B40864F\PEProvider.dll. -...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:02.
Find Us