Page 1 of 3 123 LastLast
  1.    29 Nov 2015 #1
    Join Date : Nov 2015
    Posts : 13
    Windows 10 Pro 10.0.10586 (32-bit)

    SFC errors



    I have done a /RestoreHealth using admin command promptISM
    /Online /Cleanup-Image /RestoreHealth /source:WIM:f:\Sources\Install.wim:1 /LimitAccess. Install.wim downloaded from Win10_1511_English_x32.iso.

    It said it was completed succesfully, but sfc /scannow reports these corrupted files.
      My ComputerSystem Spec
  2.    29 Nov 2015 #2
    Join Date : Aug 2015
    Maine
    Posts : 36,240
    Windows10Pro 64Bit

    Did you reboot after running DISM commands?? you should have rebooted right after running those commands.
      My ComputersSystem Spec
  3.    29 Nov 2015 #3
    Join Date : Nov 2015
    Posts : 13
    Windows 10 Pro 10.0.10586 (32-bit)
    Thread Starter

    Okay....reran the process shown below:

    Ran Image_Health command as an admin:

    IMAGEHEALTH PROGRAM OPTIONS
    ===============================================================================
    Press 0 - Quit and Exit program
    Press 1 - Run Dism /ScanHealth
    Press 2 - Run Dism /RestoreHealth
    Press 3 - Run Dism /RestoreHealth /Source
    Press 4 - Run Dism /AnalyzeComponentStore
    Press 5 - Run Dism /StartComponentCleanup
    Press 6 - Run Dism /StartComponentCleanup /ResetBase
    Press 7 - Run Dism /revertpendingactions
    Press 8 - Run SFC /Scannow
    Press 9 - Run Extended Disk Cleanup Manager
    ===============================================================================
    > Enter Your Option:
    Option 1 – DISM /ScanHealth

    ===============================================================================
    Dism is scanning the online image for health.
    Dism will report whether the image is healthy or repairable
    This will take several minutes..
    ===============================================================================

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0

    Image Version: 10.0.10586.0

    [==========================100.0%==========================]
    No component store corruption detected.
    The operation completed successfully.
    Press any key to continue . . .
    Option 2 – DISM /RestoreHealth

    ===============================================================================
    Dism is restoring the online image health.
    This will take several minutes..
    ===============================================================================

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0

    Image Version: 10.0.10586.0

    [==========================100.0%==========================]
    The restore operation completed successfully.
    The operation completed successfully.
    Press any key to continue . . .
    Option 3 – DISM /RestoreHealth /Source

    ===============================================================================
    Found Source Install.wim on Drive G:
    ===============================================================================

    ===============================================================================
    MOUNTING THE SOURCE INSTALL.WIM AS THE REPAIR SOURCE
    ===============================================================================
    1 file(s) copied.

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0

    Mounting image
    [==========================100.0%==========================]
    The operation completed successfully.

    ===============================================================================
    Dism is restoring the online image health.
    This will take several minutes..
    ===============================================================================

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0

    Image Version: 10.0.10586.0

    [==========================100.0%==========================]
    The restore operation completed successfully.
    The operation completed successfully.

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0

    Unmounting image
    [==========================100.0%==========================]
    The operation completed successfully.
    Press any key to continue . . .
    ReBooted……………………………………………………….
    Option 8 – SFC /SCANNOW

    ===============================================================================
    System File Checker is scanning the online image for corruption.
    This will take several minutes
    ===============================================================================

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection found corrupt files but was unable to fix some
    of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
    example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
    supported in offline servicing scenarios.
    Press any key to continue . . .
      My ComputerSystem Spec
  4.    29 Nov 2015 #4
    Join Date : Jun 2015
    Posts : 1,878
    Windows 3.1 to Windows 10

    post the cbs.log

    Note: SFC has been known to flag perfectly good files as corrupt, although this does not harm anything other, then the user now thinking the system is corrupt, and resulting in false positive confusion about the corruption
      My ComputerSystem Spec
  5.    29 Nov 2015 #5
    Join Date : Nov 2015
    Posts : 13
    Windows 10 Pro 10.0.10586 (32-bit)
    Thread Starter

    see next post
    Last edited by rdarnutzer; 29 Nov 2015 at 20:06.
      My ComputerSystem Spec
  6.    29 Nov 2015 #6
    Join Date : Nov 2015
    Posts : 13
    Windows 10 Pro 10.0.10586 (32-bit)
    Thread Starter

    cbs.log

      My ComputerSystem Spec
  7.    30 Nov 2015 #7
    Join Date : Jun 2015
    Posts : 1,878
    Windows 3.1 to Windows 10

    reading the CBS.log - it appears you had two mis-matched file hashes..

    It also appears they have been repaired..

    as the final result is
    -----------------------------

    Summary:
    Operation: Detect and Repair
    Operation result: 0x0
    Last Successful Step: Entire operation completes.
    Total Detected Corruption: 0
    CBS Manifest Corruption: 0
    CBS Metadata Corruption: 0
    CSI Manifest Corruption: 0
    CSI Metadata Corruption: 0
    CSI Payload Corruption: 0
    Total Repaired Corruption: 0
    CBS Manifest Repaired: 0
    CSI Manifest Repaired: 0
    CSI Payload Repaired: 0
    CSI Store Metadata refreshed: True
    Total Operation Time: 484 seconds.
      My ComputerSystem Spec
  8.    30 Nov 2015 #8
    Join Date : Nov 2015
    Posts : 13
    Windows 10 Pro 10.0.10586 (32-bit)
    Thread Starter

    re:


    So I reran sfc /scannow again after erasing the cbs log and it still reported corrupt files:

    Microsoft Windows [Version 10.0.10586]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>sfc /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection found corrupt files but was unable to fix some
    of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For
    example C:\Windows\Logs\CBS\CBS.log. Note that logging is currently not
    supported in offline servicing scenarios.

    I attached the CBS log, if it is reporting wrongly, I will just ignore the error......

    CBS (2).zip


    Thanks.....
      My ComputerSystem Spec
  9.    30 Nov 2015 #9
    Join Date : Jun 2015
    Posts : 1,878
    Windows 3.1 to Windows 10

    What are you using for your REPAIR SOURCE ??

    10586 setup media download from techbench ??

    You now have a lot of mis-matched hashes
      My ComputerSystem Spec
  10.    30 Nov 2015 #10
    Join Date : Nov 2015
    Posts : 13
    Windows 10 Pro 10.0.10586 (32-bit)
    Thread Starter

    Win10_1511_English_x32.iso
      My ComputerSystem Spec

 
Page 1 of 3 123 LastLast


Similar Threads
Thread Forum
Solved Help! dll files missing.
I've just installed Windows 10 and am getting error messages that MSVCR100.dll is missing for iCloudServices.exe, ApplePhotoStream.exe and Avgui.exe. I'm also getting MSVCP.dll missing for reader_sl. Can anyone help me fix this. Thank you.
General Support
missing dll files for an old programme
I have used an old Brodabund family Tree Maker programme in many Windows versions as they have evolved. I successefully started it running in Win 10 but now I cannot open it. I get a message that tells me that variouse .dll files are missing. Can...
Software and Apps
Solved Missing Windows 10 dll files
I have 3 missing windows 10 dll files Wow64.dll Wow64cpu.dll Wow64win.dll I used the media creation tool to create an ISO of the exact version of windows I have (windows 10 pro) and searched the file for these dll files, including the...
General Support
Missing Folders and Files
I upgraded to Windows 10 last week. I had folders and some files missing right away. I went into the "Old Windows" folder and nothing was there. Also, I couldn't go back to Windows 7 or a previous system restore because an error is all that would...
General Support
Missing Files in BT Folder
Hello Everyone, i was planning on upgrading my W7 main machine this weekend to windows 10, at one point i did have the Downloaded Files to do the upgrade, but those files are now missing From the Folder 40406404074040640407 I did clean up my C:\...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:30.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums