After 1511 November update, no WiFi (red X on icon).


  1. Posts : 6
    Win10 64bit
       #1

    After 1511 November update, no WiFi (red X on icon).


    I had my major update installed yesterday, and the only way how I managed to do that was by letting Windows delete all existing system files and drivers.

    Now that I've got everything else installed back after a whole day's work, I have a problem with my Wifi driver. To be clear, it worked on my previous Win10 version last night.

    The device manager says I have Qualcomm Atheros AR9285 802.11 b|g|n WiFi Adapter, with no yellow exclamation mark. However, the WiFi symbol shows the red and white X icon when I try to connect. Looking at the event log on device manager, there is a line:
    Device PCI\VEN_168C&DEV_002B&SUBSYS_3040103C&REV_01\4&798c88b&0&0028 requires further installation.

    Funny thing is. I'm almost sure that my WiFi network card isn't Qualcomm at all, but made by Broadcom. That's what I get when I attempt to download drivers from my manufacturer's website (HP) They have it as sp44923 installation pack there. The package consists of bcmwl6.inf file and others, which directly point at Broadcom, not Qualcomm.

    Because it worked last night, I would assume you could just point the device manager to Have disk, then point to c:\Windows.old\Windows\system32 but that does not work. Neither does any of the other locations I've tried. System insists it does not either find driver or that it is already up to date. As Qualcomm. Which it isn't.

    I need to get my WifFi running again. Help me out. Thank you.
      My Computer


  2. Posts : 119
    Windows 10 Pro
       #2

    I would go to Device Manager and uninstall the drivers and reboot while online.
    See if it updates the drivers with the proper wifi drivers.
    That's what I would try.

    If that doesn't work I'd go to your laptop manufacturers pages and see what drivers have been updated for Windows 10.
      My Computer


  3. Posts : 6
    Win10 64bit
    Thread Starter
       #3

    Trying to remove them perhaps four times in the device manager, and now it works. Go figure. Windows logic.
      My Computer


  4. Posts : 119
    Windows 10 Pro
       #4

    So did Windows install the correct drivers on re-boot?
      My Computer


  5. Sio
    Posts : 2
    Windows 10
       #5

    2hdq said:
    Trying to remove them perhaps four times in the device manager, and now it works. Go figure. Windows logic.
    Okkk guys guys GUYS! Need help and i am not a very experienced user... i have sort of the same problem... i can conect to my wi fi BUT i dont have access to internet( yellow icon with exclamation mark). I have try the netsh int ip reserttcpip.txt and nothing (says resetling fail).
    How do i remove the drivers...?
    Thanks
      My Computer


  6. Posts : 6
    Win10 64bit
    Thread Starter
       #6

    winxp said:
    So did Windows install the correct drivers on re-boot?
    It did, eventually. No idea why it would at one point have the wrong one, and after several tries the right one.
      My Computer


  7. Posts : 6
    Win10 64bit
    Thread Starter
       #7

    Sio said:
    Okkk guys guys GUYS! Need help and i am not a very experienced user... i have sort of the same problem... i can conect to my wi fi BUT i dont have access to internet( yellow icon with exclamation mark). I have try the netsh int ip reserttcpip.txt and nothing (says resetling fail).
    How do i remove the drivers...?
    Thanks
    Just right-click the device with the exclamation mark and remove the device. You can also try to update it either automatically, which is likely to fail if it doesn't work now, or choosing Have disk, and browsing to a driver you think is right.

    Also, have your WiFi receiver button/swich set to on.
      My Computer


  8. Sio
    Posts : 2
    Windows 10
       #8

    Aaaaahhh thaks m8. But seriously i have try that and the also the above advice ( remove and install the drivers) and nothing... its frustrating! Ohhh something i didnt mention. The windows network diagnstics foumd that "one or more network protocols are missing on this pc" i really dont know what to do m8s...
      My Computer


  9. Posts : 3,505
    Windows 10 Pro 64-bit 21H1 (May 2021 build 19043.1083)
       #9

    That's the annoying thing with Windows 10. It ignores all of your working drivers and replaces them with generic Microsoft drivers from Windows Update. Download the Wi-Fi driver from manufacturer and extract to a folder (if it is executable open it with WinRAR). Then search for device and click to open Device Manager. Right-click on the Wi-Fi adapter and select Update driver, then select the last option, again the last option until you see a Have disk button. Click on that and browse to the folder you extracted the driver. Select the first model from the list and proceed to install it, no matter if Windows warns you it cannot verify compatibility. You may need to restart your computer for changes to take effect. Then hide any driver updates to avoid Windows Update messing with it again.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:35.
Find Us




Windows 10 Forums